Documente Academic
Documente Profesional
Documente Cultură
Number: 001-407
Passing Score: 810
Time Limit: 120 min
File Version: 1.0
Exam A
QUESTION 1
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 2
A. public IP address
B. loopback interface
C. process ID
D. router ID
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 3
A. transparent
B. desirable
C. forwarding
D. blocking
E. on
F. auto
Explanation/Reference:
QUESTION 4
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 5
A. path count
B. unequal cost load balancing
C. equal cost load balancing
D. path selection
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 6
Explanation/Reference:
QUESTION 7
Explanation/Reference:
QUESTION 8
A. client
B. on
C. transparent
D. desirable
E. auto
F. forwarding
Explanation/Reference:
QUESTION 9
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 10
A. errdisabled
B. forwarding
C. disabled
D. enabled
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 11
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 12
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 13
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 14
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 15
A. listening
B. forwarding
C. discarding
D. learning
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 16
Explanation/Reference:
QUESTION 17
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 18
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 19
A. The interfaces configured in the EtherChannel must have same STP port path cost
B. The interfaces configured in the EtherChannel must be part of the same VLAN or trunk
C. The interfaces configured in the EtherChannel must operate at the speed and duplex mode
D. The interfaces configured in the EtherChannel must be on the same physical switch
E. An EtherChannel can operate in Layer 2 mode only
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 20
A. it is used to initiate a VTP server and client relationship
B. it uses TLVs to share device information
C. it runs on the data link layer only
D. it uses SNMP to share device information to an external server
E. it runs on the network layer and the data link layer
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 21
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 22
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 23
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 24
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 25
A. CBWFQ
B. FRTS
C. CAR
D. PBR
E. PQ
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 26
A. SNMP
B. NetFlow
C. IP SLA
D. RSPAN
E. SPAN
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 27
A. it requires a remote device to log and maintain collected data
B. it can use RSPAN to report network statistics to a designated remote port
C. it aggregates traffic statistics for reporting on a configuration basis
D. it generates continuous traffic to monitor network performance
E. it measures traffic to determine the reliability of a connection from a Cisco router to a designated end device
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 28
A. redundancy
B. reduce jitter
C. reliability
D. improved scalability
E. increased latency
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 29
A. 12.17.1.20
B. 172.31.255.100
C. 10.172.76.200
D. 192.168.32.10
E. 172.15.2.250
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 30
A. When a new master switch is elected, it queries the previous master for its running configration
B. Each switch manages its own MAC address table
C. The admminstrator can add additional switches to the stack as demand increases
D. The administrator can create only one stack of switch of switches in a network which is under the same administrative domain
E. it enables the administrator to manage multiple switches from a single management interface
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 31
A. NAT
B. NTP
C. RFC 1631
D. RFC 1918
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 32
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 33
A. NHRP
B. NDP
C. TCPv6
D. ARP
E. CLNS
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 34
A. forwarding
B. learning
C. listening
D. discarding
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 35
A. /127
B. /32
C. /64
D. /48
E. /128
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 36
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 37
Explanation/Reference:
QUESTION 38
A. outside local
B. inside public
C. outside public
D. inside global
E. outside global
F. inside local
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 39
A. it is a Cisco-proprietary technology
B. it uses mandatory TLVs to discover the neighboring devices
C. it is implemented in accordance with the 802.11a specification
D. it enables systems to learn about one another over the data-link layer
E. it functions at Layer 2 and Layer 3
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 40
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 41
A. emergency
B. error
C. critical
D. debug
E. warning
F. informational
Explanation/Reference:
QUESTION 42
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 43
A. You can add or remove switches without talking the stack down
B. Each switch in the stack can use a different IOS image
C. Each switch in the stack handles the MAC table independently from the others
D. You can licanse the entire stack with a single master license
E. The stack enables any active member to talk over as the master switch if the existing master fails
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 44
A. 0x2102
B. 0x2124
C. 0x2142
D. 0x2120
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 45
A. get
B. capture
C. response
D. trap
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 46
A. 255.255.252.0
B. 255.255.255.128
C. 255.255.248.0
D. 255.255.255.224
E. 255.255.255.0
F. 255.255.255.192
Correct Answer: BF
Section: (none)
Explanation
Explanation/Reference:
QUESTION 47
A. SFTP
B. ARP
C. PAT
D. TFTP
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 48
Explanation/Reference:
QUESTION 49
A. HMAC-SHA
B. CBC-DES
C. HMAC-MD5
D. community strings
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 50
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 51
A. FEC0:ABCD:WXYZ:0067::2A4
B. 2004:1:25A4:886F::1
C. 2001:0000:130F::099a::12a
D. 2002:7654:A1AD:61:81AF:CCC1
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 52
A. Switch B - Fa0/0
B. Switch B - Fa0/1
C. Switch C - Fa0/0
D. Switch A - Fa0/0
E. Switch A - Fa0/1
F. Switch C - Fa0/1
Explanation/Reference:
QUESTION 53
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 54
A. 192.168.1.56/26
B. 192.168.1.64/27
C. 192.168.1.56/27
D. 192.168.1.64/26
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 55
A. SwitchA, Fa0/1, root
B. SwitchD, Gi0/2, root
C. SwitchA, Fa0/2, designated
D. SwitchB, Gi0/2, root
E. SwitchB, Gi0/1, designated
F. SwitchC, Fa0/2, root
Explanation/Reference:
QUESTION 56
A. There is a speed mismatch between SW1`s Fa0/1 and SW2`s Fa0/1 interfaces
B. SW1`s Fa0/1 interface is administratvely shut down
C. There is an encapsulation mismatch between SW1`s Fa0/1 and SW2`s Fa0/1 interfaces
D. There is an MTU mismatch between SW1`s Fa0/1 and SW2`s Fa0/1 interfaces
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 57
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 58
A. external global
B. outside private
C. inside global
D. external local
E. inside local
F. inside private
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 59
A. ntp associations-key
B. ntp max-associations
C. ntp peer
D. ntp authenticate
E. ntp trusted-key
F. ntp refclock
Explanation/Reference:
QUESTION 60
A. UDP echo
B. ICMP path echo
C. UDP Jitter
D. ICMP path Jitter
E. TCP connect
F. ICMP echo
Correct Answer: AF
Section: (none)
Explanation
Explanation/Reference:
QUESTION 61
A. A Syslog server provides the storage space necessary to store log fles withuot using router disk space
B. A Syslog server helps in aggregation of logs and alerts
C. The Syslog server automatically notofies the network administrator of network problems
D. There are more Syslog messages available within Cisco IOS than there are comparable SNMP trap messages
E. Enabling Syslog on a router automatically enables NTP for accurate time stamping
F. Utilizing Syslog improves network performance
Correct Answer: ABD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 62
Explanation/Reference:
QUESTION 63
A. no logging monitor
B. logging host 10.2.0.21
C. logging buffered 4
D. no logging console
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 64
A. broadcast
B. podcast
C. allcast
D. multicast
E. anycast
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 65
A. VLAN 20 is running the Per VLAN Spanning Tree Protocol
B. The MAC address of the root bridge is 0017.596d.1580
C. SwitchA is not the root bridge, because not all of the interface roles are designated
D. The Fa0/11 role confirms that SwitchA is the root bridge for VLAN 20
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 66
Explanation/Reference:
QUESTION 67
A. HDLC
B. Frame Relay
C. PPP
D. X.25
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 68
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 69
A. router#show platfrom
B. router#show interface Serial 0/2/0
C. router#show ip interface brief
D. router#show ip interface Serial 0/2/0
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 70
A. The transport layer divides a data stream into segments and may add reliability and flow control information
B. The data link layer adds physical source and destination addresses and an FCS to the segment
C. Packets are created when the network layer encapsulates a frame with source and destination host addresses and protocol-related control information
D. The presentation layer translates bits into voltages for transmission across the physical link
E. Packets are created when teh network layer adds layer 3 addresses and control information to a segment
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 71
Explanation/Reference:
QUESTION 72
A. cdp run
B. cdp enable
C. run cdp
D. enable cdp
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 73
A. fd15:0db8:0000:0000:700:3:400F:572B
B. fd15:db8:0::700:3:4F:572B
C. fd15:db8::700:3:400F:572B
D. fd15::db8::700:3:400F:572B
E. fd15:0db8::7:3:4F:572B
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 74
Explanation/Reference:
QUESTION 75
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 76
A. bootstrap
B. ROMMON mode
C. POST
D. mini-IOS
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 77
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 78
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 79
A. Layer 2 bridge
B. Layer 3 switch
C. Layer 2 switch
D. router
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 80
A. no earner
B. CRC errors
C. giants
D. runts
E. deferred
F. late collisions
Correct Answer: F
Section: (none)
Explanation
Explanation/Reference:
QUESTION 81
A. A more efficient use of bandwidth can be achieved allowing many logical network to use the same network infrastructure
B. port-based VLANs increase switch-port use efficiency, thanks to 802.1Q trunk
C. A higher level of network security can be reached by separating sensitive data traffic from other network traffic
D. Broadcast stroms can be mitigated by decreasing the number of broadcast domains, this increasing their size
E. Broadcast storms can be mitigated by increasing the number of broadcast domains, thus reducing their size
F. A more efficient use of bandwidth can be achieved allowing many physical group to use the same network infrastructure
G. VLANs make it easier for IT staff to configure new logical groups, because the VLANs all belong to the same broadcast domain
Explanation/Reference:
QUESTION 82
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 83
A. router#show interface gig 0/1
B. router#show line
C. router#show ip protocols
D. router#show startup-config
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 84
A. distance-vector protocols
B. link-state protocols
C. path-vector protocols
D. exterior gateway protocols
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 85
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 86
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 87
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 88
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 89
A. They occur when CRC errors and interference occur on the cable
B. They are frames that exceed 1518 bytes
C. By definition, they occur after the 512th bit of the frame has been transmited
D. They may indicate a duplex mismatch
E. They indicate received frames that did not pass the FCS match
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 90
A. Switches that are configured with VLANs make forwarding decisions based on both Layer 2 and Layer 3 address information
B. If a switch receives a frame for an unknown destination, it uses ARP to resolve the address
C. Spanning Tree Protocol allows switches to automatically share VLAN information
D. Establishing VLANs increases the number of broadcast domains
E. in a roperly functioning network with redudant switched paths, each switched segment will contain one root bridge with all its ports in the forwarding state. All other switches in that broadcast domain will have only one root port
F. Microsegmentation decreases the number of collisions on the network
Explanation/Reference:
QUESTION 91
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 92
A. header
B. frame check sequence
C. type
D. destination IP address
E. source IP address
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 93
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 94
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 95
A. duplex
B. trunk encapsulation
C. speed
D. DTP negotiation settings
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 96
Explanation/Reference:
QUESTION 97
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 98
A. restrict
B. access
C. shutdown
D. protect
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 99
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 100
QUESTION 101
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 102
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 103
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 104
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 105
A. crossover
B. straight-through
C. crossed
D. rolled
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 106
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 107
A. Class C
B. Class B
C. Class A
D. Class D
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 108
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 109
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 110
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 111
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 112
A. site-to-site VPN
B. MPLS
C. DMVPN
D. EBGP
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 113
A. protect
B. shutdown
C. restrict
D. shutdown vlan
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 114
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 115
A. 2
B. 110
C. 90
D. 52778
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 116
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 117
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 118
A. errdisable
B. shutdown
C. listening
D. blocking
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 119
Explanation/Reference:
QUESTION 120
A. network 172.16.1.32 0.0.0.31
B. network 172.16.1.0 0.0.0.255
C. network 172.16.1.33 mask 255.255.255.224
D. network 172.16.1.32 255.255.255.224
E. network 172.16.1.32 mask 0.0.0.31
F. network 172.16.1.32 mask 255.255.255.224
Correct Answer: F
Section: (none)
Explanation
Explanation/Reference:
QUESTION 121
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 122
A. to uniquely identify devices at Layer 2
B. to allow communication between diffenrent devices on the same network
C. to diffenrentiate a Layer 2 frame from a Layer 3 packet
D. to establish a priority system to determine which device gets to transmit first
E. to allow detection of a remote device when its physical address is unknown
F. to allow communication with devices on a diffenrent network
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 123
Explanation/Reference:
QUESTION 124
A. 0000.0C07.AC15
B. 0007.B400.AE01
C. 0000.5E00.01A3
D. 0007.5E00.B301
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 125
A. 1 through 1001
B. 1 through 1002
C. 2 through 1005
D. 2 through 1001
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 126
A. learning
B. listening
C. forwading
D. disabled
E. discarding
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 127
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 128
A. network
B. transport
C. application
D. internet
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 129
Explanation/Reference:
QUESTION 130
A. IP address
B. Priority
C. Premmpt
D. Version
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 131
A. ISDN
B. SLIP
C. NCP
D. DLCI
E. LCP
Correct Answer: E
Section: (none)
Explanation
Explanation/Reference:
QUESTION 132
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 133
A. when the router must route multiple subnets across a single physical link
B. when the router must route a single subnet across a single physical link
C. when the router must route multiple subnets across multiple physical links
D. when the router must route a single subnet across multiple physical links
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 134
Explanation/Reference:
QUESTION 135
A. IP address of computer A
B. IP address of the R1 interface F0/1
C. IP address of the R2 interface F0/1
D. IP address of computer B
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 136
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 137
Explanation/Reference:
QUESTION 138
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 139
A. PVST+ reduces the CPU cycles for all the switches in the network
B. PVST+ supports Layer 3 load balancing without loops
C. PVST+ automatically selects the root bridge location, to provide optimized bandwidth usage
D. PVST+ allows the root switch location to be optimized per VLAN
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 140
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 141
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 142
A. flexibility of design
B. low cost
C. simplicity of configuration
D. full-mesh capability
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 143
A. The HSRP virtual IP address must be on a different subnet than the routers` interface on the same LAN
B. The HSRP virtual IP address must be the same as one of the router`s interface addresses on the LAN
C. The HSRP default timers are a 3 second hello interval and a 10 second dead interval
D. HSRP supports only clear-text authentication
E. The virtual IP address and virtual MAC+K44C address are active on the HSRP master router
F. HSRP supports up to 255 groups per interface, enabling an administrative form of load balancing
Explanation/Reference:
QUESTION 144
A. classifying traffic
B. providing long term storage of buffered data
C. discarding excess traffic
D. queuing traffic based on priority
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 145
Correct Answer: CG
Section: (none)
Explanation
Explanation/Reference:
QUESTION 146
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 147
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 148
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 149
A. checksums
B. optional IPsec
C. autoconfiguration
D. no broadcasts
E. plug-and-play
F. complicated header
Explanation/Reference:
QUESTION 150
A. FC00::/8
B. FE80::/10
C. FC00::/7
D. FF00::/8
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 151
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 152
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 153
A. 802.1w
B. 802.3ad
C. 802.1Q
D. 802.1D
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 154
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 155
A. RARP
B. CSMA/CA
C. IEEE 802.1x
D. CSMA/CD
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 156
A. dynamic
B. bia
C. sticky
D. static
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 157
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 158
A. This switch is running RSTP while the elected designated switch is running 802.1d Spanning Tree
B. This switch has a lower bridge ID for VLAN 2 than the elected designated switch
C. This switch interface has a higher path cost to the root bridge than another in the topology
D. This switch has more than one interface connected to the root network segment in VLAN 2
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 159
A. learning
B. forwarding
C. disabled
D. blocking
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 160
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 161
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 162
Explanation/Reference:
QUESTION 163
A. extended
B. IP named
C. reflexive
D. Standard
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 164
A. version2
B. ip rip receive version 1
C. IP RIP V2-BROADCAST
D. ip rip receive version 2
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 165
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 166
A. it can authorize specific router commands
B. it encrypts only the password
C. it uses UDP as its transport protocol
D. it combines authentication and authorization
E. it separates authentication, authorization, and accounting functions
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 167
A. SPAN
B. STP
C. ACL
D. IP SLA
E. SNMP
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 168
A. tool guard
B. udld
C. BPDU guard
D. roote guard
E. DTP
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 169
Explanation/Reference:
QUESTION 170
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 171
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 172
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 173
A. FF02::1
B. FF02::2
C. FF02::3
D. FF02::4
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 174
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 175
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 176
A. Ensure the switch has power
B. Reseat all cables
C. Reboot all of the device
D. Ensure cable A is plugged into a trunk port
E. Ensure that the Ethernet encapsulations match on the interconected router and switch ports
F. Ensure that cables A and B are straight through cables
Explanation/Reference:
QUESTION 177
A. 802.3x
B. 802.1x
C. 802.2x
D. 802.11
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 178
A. strict
B. time stamp
C. record
D. verbose
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 179
A. Dual-homed connections to multiple service providers can use OSPF or EIGRP for load balancing
B. Single-homed connetions to a service provider require OSPF or EIGRP
C. Single-homed connetions to a service provider can use either static routing or BGP
D. Dual-homed connections to a service provider most frequently use static routing
E. Dual-homed connection to multiple service providers typically use BGP
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 180
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 181
A. The EIGRP neighbor IP address is 10.111.253.216
B. Route 10.42.91.0/24 has a tag of 28160
C. Each route has only one best path
D. The RIGRP neighbor IP address is 10.111.253.216
E. Route 10.42.88.0/21 has an administrative distance of 28160
F. The reported distance of 10.0.0.0/8 is 0
Correct Answer: CF
Section: (none)
Explanation
Explanation/Reference:
QUESTION 182
A. Physical
B. Transport
C. Network
D. Data link
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 183
A. A sequence number
B. An acknowledgment number
C. A TTL number
D. A session ID
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 184
A. Dynamic
B. Standard
C. Reflexive
D. Extended
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 185
A. Top-down
B. Round-robin
C. Policing
D. Divide and conquer
E. Layer-by-layer
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 186
A. Protocol
B. Destination address
C. Source address
D. Periodic refresh interval
E. Source port
F. Destination port
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 187
A. Create an access list and apply it to the virtual terminal interface with the access-group command
B. Enter an access list and apply it to the virtual terminal interfaces using the access-class-command
C. Configure a virtual terminal password and login process
D. Physically secure the interface
E. Administratiely shut down the interface
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 188
A. CDP operates normally, but is cannot provide any information for that neighbor
B. CDP becomes inoperable on that neighbor
C. CDP uses the IP address of another interface for that neighbor
D. CDP operates normally, but it cannot provide IP address information for that neighbor
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 189
A. Source 192.168.20.10 and destination 192.168.20.1
B. Source 10.10.1.1 and destination 10.10.2.2
C. Source 192.168/10/10 and destination 10.10.2.2
D. Source 192.168.10.10 and destination 192.168.20.10
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 190
A. The path through R1, because the OSPF administrative distance 110
B. The path through R2, because the EBGP administrative distance is 20
C. The path through R2, because the IBGP administrative distance is 200
D. The path through R2, because the EIGRP administrative distance is lower than the OSPF and BGP administrative distance
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 191
A. Autonegotiation
B. Protocol analyzer
C. UDLD
D. Loopback test
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 192
A. The client sends a request for IP address to domain name resolution to the DNS server
B. They use destination port 53
C. The client sends a request for a domain name to IP address resolution to the DNS server
D. The DNS server pings the destination to verify that it is available
E. When the primary IP address of the destination is down, the DNS server can forward the client to an alternate IP address
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 193
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 194
A. The destination MAC address is missing from the CAM table
B. The source MAC address is missing from the CAM table
C. The destination IP address is missing from the route table
D. The source IP address is missing from the route table
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 195
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 196
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 197
A. Fragment-free
B. Layer 3
C. Store-and-forward
D. Cur-though
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 198
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 199
A. it is process switched
B. it is dropped
C. it is queued
D. it is flooded
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 200
A. The mac address table will now have and additional entry of fa0/1 ffff.ffff.ffff
B. This frame will be discarded when it is received by 2950 Switch
C. Only frames from source 0000.00bb.bbbb the first learned MAC address of 2950 Switch will be forwarded our fa0/1
D. Only host A will be allowed to transmit frames on fa0/1
E. Hosts B and C may forward frames out fa0/1 but frames arriving from other switches will not be forward out fa0/1
F. All frame arriving on 2950 Switch with a destination of 0000.00aa.aaaa will be forwarded out 0/1
Correct Answer: DF
Section: (none)
Explanation
Explanation/Reference:
QUESTION 201
A. VPN
B. DMVPN
C. Site-to-site VPN
D. Client VPN
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 202
A. Scan Timer
B. TTD
C. Flow label
D. Hop Count
E. Hop Limit
Correct Answer: E
Section: (none)
Explanation
Explanation/Reference:
QUESTION 203
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 204
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 205
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 206
A. A duplex mismatch
B. Alignment errors
C. Native VLAN mismatches
D. Excessive collisions
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 207
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 208
A. Show ip access-list
B. Show interface
C. Show access-list
D. List ip interface
E. Show ip interface
Correct Answer: E
Section: (none)
Explanation
Explanation/Reference:
QUESTION 209
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 210
A. show standby
B. show sessions
C. show hsrp
D. show interface
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 211
A. VRRP
B. multichassis ether channels
C. stackwise
D. BFD
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 212
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 213
A. ntp master
B. ntp server
C. ntp authenticate
D. ntp peer
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 214
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 215
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 216
A. stackwise
B. LACP
C. VRRP
D. VSS
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 217
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 218
A. it specifies the network that is used when the device finds an exact match in the routing table
B. it can be configured on a layer 2 switch to specify the next hop
C. it requires IP routing to be disabled on the device
D. it specifies the network that is used when the device cannot finds an exact match in the routing table
E. it requires IP routing to be enabled on the device
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 219
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 220
A. 9215 bytes
B. 3000 bytes
C. 1500 bytes
D. 2000 bytes
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 221
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 222
A. switch#
B. switch(config)#
C. switch>
D. switch(config-if)#
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 223
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 224
A. it allows the network to respond immediately to changes
B. it cannot be used to load-balance traffic over over multiple links
C. it can be implemented easily even in large environments
D. it produces minimal CPU load
E. it allows the administrator to control the path of traffic
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 225
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 226
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 227
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 228
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 229
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 230
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 231
A. ip domain list
B. ip domain lookup
C. ip domain round-robin
D. ip name-server 192.168.10.14 192.168.10.15
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 232
A. REST
B. OpenFlow
C. OpenStack
D. OpFlex
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 233
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 234
A. 6to4
B. 4to6
C. ISATAP
D. GRE
E. Teredo
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 235
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 236
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 237
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 238
A. the MAC address of Switch 1
B. the MAC address of the router's E0 interface
C. the IP address of Switch 1
D. the IP address of Host C
E. the IP address of the router's E0 interface
F. the MAC address of Host C
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 239
A. switch 00E0.F90B.6BE3
B. switch 0004.9A1A.C182
C. switch 00E0.F726.3DC6
D. switch 0040.0BC0.90C5
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 240
A. name resolver
B. authoritative name server
C. web server
D. ESX Host
E. file transfer server
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 241
A. the serial interfaces of the routers are not on the same subnet
B. HostA is not on the same subnet as its default gateway
C. the Fa0/0 interface on RouterA is on a subnet that can't be used
D. the Fa0/0 interface on RouterB is using a broadcast address
E. the address of SwitchA is a subnet address
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 242
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 243
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 244
A. internal
B. external
C. remote
D. direclty attached
E. autonomous
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 245
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 246
A. source IP address
B. destination port
C. destination IP address
D. source interface
E. source port
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 247
A. lldp run
B. lldp transmit
C. cdp run
D. lldp receive
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 248
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 249
A. EIGRP
B. OSPF
C. RIP
D. IGRP
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 250
A. six
B. one
C. twelve
D. two
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 251
A. Preamble
B. Frame Check Sequence
C. Version
D. Header Checksum
E. Time to Live
F. Length/Type
Explanation/Reference:
QUESTION 252
A. Link A-172.16.3.40/30
B. Link A-172.16.3.0/30
C. Network A-172.16.3.48/26
D. Network A-172.16.3.192/26
E. Network A-172.16.3.128/25
F. Link A-172.16.3.112/30
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 253
A. You can add or remove switches without taking the stack down
B. Each switch in the stack can use a different IOS image
C. The stack enables any active member to take over as the master switch if the exiting master fails
D. Each switch in the stack handles the MAC table independently from the others
E. You can license the entire stack with a single master license
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 254
A. no ip access-list 102 in
B. no ip access-class 102 in
C. no ip access-class 102 out
D. no ip access-group 102 out
E. no ip access-group 102 in
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 255
A. The sticky learning feature allows the addition of dynamically learned addresses to the running configuration
B. The network administrator can apply port security to EtherChannels
C. When dynamic MAC address learning is enabled on an interface the switch learns new addresses, up to the maximum defined
D. no ip access-list 102 in A network administrator can configure static secure or sticky secure MAC addresses in the voice VLAN
E. The network administrator can apply port security to dynamic access ports
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 256
A. presentation
B. data link
C. session
D. network
E. transport
F. application
Explanation/Reference:
QUESTION 257
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 258
A. auto
B. passive
C. active
D. desirable
E. on
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 259
A. SW1(config-line)#absolute-timeout 0 10
B. SW1(config-line)#exec-timeout 0 10
C. SW1(config-line)#exec-timeout 10
D. SW1(config-line)#absolute-timeout 10
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 260
A. configure a static route London to direct all traffic destined for 172.16.0.0/22 to 10.1.1.2
B. configure a static default route on london with a next hop of 10.1.1.1
C. configure a dymanic routing protocol on london to advertise all router Manchester
D. configure a dynamic routing on London to advertise summarizated routes to manchester
E. configure a dynamic routing on manchester to advertise a default route to the london router
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 261
A. Router C will use ICMP to inform Router B that Host 2 cannot be reached
B. Router C will use ICMP to inform Host 1 that Host 2 cannot be reached
C. Router C will send a Destination Unreachble message type
D. Router C will use ICMP to inform Host 1 Router A, and Router B that Host 2 cannot be reached
E. Router C will send a Router Selection message typea
F. Router C will send a Source Quench message type
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 262
A. authority
B. accountability
C. authorization
D. accounting
E. accessibility
F. authentication
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 263
A. IP routing is not enabled
B. The routing table on Coffee has not updated
C. The FastEthernet interface on Coffee is disabled
D. A static route is configured incorrectly
E. The neighbor relationship table is not correctly updated
F. The network has not fully converged
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 264
A. VLAN hopping
B. spoofing attacks
C. ARP attacks
D. DDOS attacks
E. brute force attacks
F. botnet attacks
Explanation/Reference:
QUESTION 265
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 266
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 267
A. 1:1
B. 1+N
C. N:1
D. 1:N
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 268
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 269
A. local7
B. local5
C. local4
D. local6
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 270
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 271
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 272
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 273
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 274
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 275
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 276
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 277
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 278
A. star
B. point-to-point
C. full mesh
D. hub and spoke
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 279
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 280
A. it examines the routing table for the best path to the destination IP address of the packet
B. it removes the LAyer 3 frame header and trailer
C. it examines the MAC address table for the forwarding interface
D. it encapsulates the LAyer 2 packet
E. it removes the Layer 2 frame header and trailer
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 281
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 282
A. dynamic
B. static
C. manual
D. automatic
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 283
A. They are used as backup routes when the primary route goes down
B. They have a higher administrative distance than default static route administrative distance
C. They are routes to the exact /32 destination address
D. They are dynamic routes that are learned from a server
E. They are used when a route to the destination network is missing
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 284
Explanation/Reference:
QUESTION 285
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 286
A. You must configure neighboring devices with the same ipv6 hello-interval eigrp value
B. The variance command for EIGRPv6 is independent of EIGRPv4
C. If you change the interface delay, the EIGRpv4 delay remains unchanged
D. The router ID must be an IPv6 address
E. If you change the interface bandwidth, the EIGRPv4 metric is affected
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 287
A. DNS
B. MPLS
C. DHCP
D. IPv6
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 288
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 289
A. Service provides use EGP and BGP for intra-AS routing
B. OSPF, EIGRP, and BGP are categorized as IGP routing protocols
C. Service provides use OSPF and IS-IS for intra-AS routing
D. EGP routing protocols are used to connect multiple IGP networks
E. IGP routing protocols are used within internal networks
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 290
A. strict
B. record
C. timestamp
D. verbose
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 291
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 292
Explanation/Reference:
QUESTION 293
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 294
A. delete
B. copy
C. show dir
D. show file
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 295
A. enabled
B. disable
C. logout
D. configure terminal
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 296
A. LLDP-MED
B. LLDP-VOIP
C. TLV
D. LLDPv3
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 297
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 298
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 299
A. ip address dhcp
B. ip helper-address
C. ip dhcp relay
D. ip dhcp pool
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 300
A. incoming interface
B. destination network and mask
C. source network and mask
D. administrative distance of the route
E. next-hop address or exit interface
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 301
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 302
A. AES-256
B. SHA-1
C. MD5
D. CRC
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 303
A. DTP
B. PortFast
C. port security
D. COPP
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 304
A. to speed up convergence
B. to confine network instability to single areas of the network
C. to reduce routing overhead
D. to decrease latency by increasing bandwidth
E. to lower cost by replacing routers with distribution layer switches
F. to reduce the complexity of router configuration
Explanation/Reference:
QUESTION 305
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 306
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 307
A. OSPF
B. RSTP
C. RIP
D. 802.1D
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 308
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 309
A. They provide security to and users when the users access the internet
B. They require Network Address Translation or Port Address Traslation to access the internet
C. They have reserved address space for Class A and Class B networks only
D. They increase network performance
E. They must be registered
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 310
A. Two secure MAC address are manually configured on the interface
B. A syslog message is generated when the maximum number of secure MAC addresses is reached one the interface
C. The interface is error disabled
D. An SNMP trap is generated when the maximum number of secure MAC addresses is reached on the interface
E. The interface dynamically learned two secure MAC addresses
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 311
A. The variance command must have been issued to allow route 10.85.184.0 to have two successors
B. The FD 28416 for route 10.242.0.148 is also the metric for the routing table
C. All successors are injecting into the routing table
D. The reported distance value is greater than the feasible distance
E. If a route has more than one successor, only one route is injected into the routing table
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 312
A. shutdown VLAN
B. shutdown
C. restrict
D. protocol
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 313
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 314
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 315
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 316
A. designated
B. backup
C. forwarding
D. alternate
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 317
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 318
A. In the TCP/IP reference model, PDU encapsulation starts on the internet layer with the from the appliction layer
B. In the TCP/IP reference model, PDU encapsulation occurs on the network layer
C. PDU encapsulation takes place only the transport layer
D. During encapsulation, each layer adds a header and trailer to the PDU from the layer below
E. During encapsulation, each layer adds a header and sometimes adds a trailer to the PDU from the layer above
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 319
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 320
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 321
A. The CTL field in the UDP packet header enables a theree-way handshake to establish the connection
B. UDP traffic has lower overhead than TCP traffic
C. The aplication can use checksums to verify the integrity of application data
D. UDP provides a bult-in recovery mechanism to retransmit lost packets
E. UDP maintains the connection state to provide more stable connections than TCP
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 322
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 323
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 324
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 325
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 326
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 327
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 328
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 329
A. store-and-forward
B. cut-through
C. fragment-free
D. Layer 3
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 330
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 331
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 332
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 333
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 334
A. It uses ICMP
B. It can identify the source of an ICMP "time extended" message
C. It can verify connectivity to a remote device without identifying the path
D. It uses UDP
E. It can identify the path that a packet takes to a remote device
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 335
A. The leftmost bit is always 0
B. The address is 6 bytes long
C. The leftmost bit is always 1
D. The address is 4 bits long
E. The address is 4 bytes long
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 336
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 337
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 338
A. 10.101.255.255
B. 10.101.0.1
C. 10.101.254.254
D. 224.0.0.1
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 339
A. HSRP
B. VSS
C. VRRP
D. StackWise
E. GLBP
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 340
A. flexibility
B. easy access with low security
C. on-demand scalability
D. full control of infrastructure
E. complexity at higher cost
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 341
A. perpormance
B. control
C. data
D. management
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 342
A. LSA
B. RSTP
C. BPDU
D. LSP
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 343
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 344
A. DTP
B. SPAN destination port
C. SPAN source port
D. voice VLAN
E. EtherChannel
Correct Answer: CD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 345
Explanation/Reference:
QUESTION 346
A. ip address dhcp
B. ip helper-address
C. ip dhcp pool
D. ip dhcp client
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 347
A. router rip
version 2
network 192.168.3.0
network 192.168.4.0
B. router rip
version 2
network 192.168.3.0
network 192.168.23.0
passive-interface default
C. router rip
version 2
network 192.168.4.0
network 192.168.23.0
D. router rip
version 2
network 192.168.3.0
network 192.168.4.0
network 192.168.23.0
E. router rip
version 2
network 192.168.3.0
network 192.168.4.0
network 192.168.23.0
passive-interface default
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 348
A. The router has an OSPF Area 0 adjacency with the device at 10.82.4.42
B. The router is learning external OSPF and EIGRP routes
C. At least two IGP routing protocols are running on the router
D. At least three IGP routing protocols are running on the router
E. The router has two EIGRP neighbors and one OSPF neighbor
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 349
A. The Interface drops traffic from unknown MAC addresses
B. A syslog message is generated
C. The secuity violation counter does not increment
D. The interface is error-disabled
E. The port LED turns off
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 350
A. 10
B. 6
C. 9
D. 8
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 351
A. Category 3
B. Category 6
C. RG-11
D. Category 5e
E. G-6
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 352
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 353
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
QUESTION 354
Correct Answer: AE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 355
A. Ctrl+C
B. Ctrl+V
C. Ctrl-Alt-Delete
D. Shift-Esc
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 356
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 357
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 358
A. 1500 bytes
B. 32 bytes
C. 1024 bytes
D. 64 bytes
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 359
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 360
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 361
Section: (none)
Explanation
Explanation/Reference:
QUESTION 362
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 363
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 364
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 365
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 366
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 367
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 368
Section: (none)
Explanation
Explanation/Reference:
QUESTION 369
Section: (none)
Explanation
Explanation/Reference:
QUESTION 370
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 371
Section: (none)
Explanation
Explanation/Reference:
QUESTION 372
Section: (none)
Explanation
Explanation/Reference:
QUESTION 373
Section: (none)
Explanation
Explanation/Reference:
QUESTION 374
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 375
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 376
Section: (none)
Explanation
Explanation/Reference:
QUESTION 377
Section: (none)
Explanation
Explanation/Reference:
QUESTION 378
Section: (none)
Explanation
Explanation/Reference:
QUESTION 379
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 380
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 381
Select and Place:
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 382
Section: (none)
Explanation
Explanation/Reference:
QUESTION 383
Section: (none)
Explanation
Explanation/Reference:
QUESTION 384
Section: (none)
Explanation
Explanation/Reference:
QUESTION 385
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 386
Correct Answer:
Section: (none)
Explanation
Explanation/Reference:
QUESTION 387
A. There is a Layer 2 issue; an encapsulation mismatch on serial links
B. There is an area ID mismatch
C. There is an OSPF hello and dead interval mismatch
D. There R3 router ID is configured on R4
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 388
A. There is a PPP authentication issue; a password mismatch
B. There is an OSPF hello and dead interval mismatch
C. There is an area ID mismatch
D. There is a missing network command in the OSPF process on R5
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 389
A. R2 ethernet0/1 and R3 ethernet0/0 are configured with a non-default OSPF hello interval of 25; configure no ip ospf hello-interval 25
B. Enable OSPF for R1 ethernet0/1; configure ip ospf 1 area 0 command under ethernet0/1
C. R1 ethernet0/1 is shutdown. Configure no shutdown command
D. R1 ethernet0/1 configured with a non-default OSPF hello interval 25; configure no ip ospf hello-interval 25
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 390
A. There is an OSPF hello and dead interval mismatch
B. There is a PPP authentication issue; the username is not configured on R3 and R6
C. There is an area ID mismatch
D. The R3 router ID configured on R6
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 391
A. Automatic summaization is enabled, so only the 10.0.0.0 network is displayed
B. The interface are shutdown, so they are not being advertised
C. The loopback addresses haven`t been advertised, and the network command is missing on R4
D. R4 has been incoorectly configured to be in another AS, so it does not peer with R5
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 392
A. The traffic goes through R2
B. The traffic goes through R3
C. The traffic is equally load-balanced over R2 and R3
D. The traffic is unequally load-balanced over R2 and R3
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 393
A. The passive-interface command is enabled
B. The network command is missing
C. The K values mismatch
D. The AS does not match
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 394
A. The network statement is misssing on R1
B. The network statement is misssing on R5
C. The IP address that is configured on the Lo1 interface on R5 is incorrect
D. The loopback interface is shut down on R5
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 395
A. Corp1>enable
Corp1#show running-config
Corp1#configure terminal
Corp1(config)#access-list 100 permit tcp host 192.168.224.3 host 172.22.242.17 eq 80
Corp1(config)#access-list 100 deny ip any host 172.22.241.17
Corp1(config)#access-list 100 permit ip any any
Corp1(config)#interface fastethernet 0/1
Corp1(config-if)#ip access-group 100 out
Corp1(config-if)#end
Corp1#copy running-config startup-config
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 396
A. On R2, The network statement In the DHCP pool configuration os oncorrectly configured
B. On R3, DHCP is not enabled on the interface that is connected to R2
C. On R2, the interface that is connected to R3 is in shutdown condition
D. On R3, the interface that is connected to R2 is in shutdown condition
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 397
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 398
A. A standard ACL statement that is configured on R1 is blocking the traffic sourced from R2 LAN network
B. A standard ACL statement that is configured on R2 is blocking the traffic sourced from R2 LAN network
C. A standard ACL statement that is configured on R1 is blocking the traffic sourced from Server1 network
D. A standard ACL statement that is configured on R2 is blocking the traffic sourced from Setver1 network
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 399
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 400
A. Correctly assign an IP address to interface fa0/1
B. Remove access-group 102 out from interface s0/0/0 and add access-group 114 in
C. Remove access-group 106 in from interface fa0/0 and add access-group 115 in
D. Remove access-group 106 in from interface fa0/0 and add access-group 114 in
E. Change the ip access-group command on fa0/0 from "in* to "out.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 401
A. Routing protocol updates for the 10.4.4.0 network would not be accepted from thhe fa0/0 interface
B. IP traffic would be passed through the interface but TCP and UDP traffic would not
C. Attempts to telnet to the router would fail
D. It would allow all traffic from the 10.4.4.0 network
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 402
A. No host could connect to RouterC through s0/0/1
B. FTP, FTP-DATA, echo, and www.would work but telnet would fail
C. Only traffic from the 10.4.4.0 network would pass through the interface
D. Telnet and ping would work but routing updates would fail
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 403
A. The Router is missing subinterface configuration
B. The IP address is misconfigured on the primary router interface
C. The VLAN encapsulation is misconfigured on the router subinterfaces
D. The Trunk is not configured on the L2SW1 switch
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 404
A. Default route pointing to ISP router is configured with AD of 255
B. Router R1 configured as DHCP client is not receiving default route via DHCP from ISP router
C. Default route pointing to ISP router is not configured on Router R1
D. The next hop router address for the default route is correctly configured
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 405
A. RIPv2 routing updates are suppressed between R2 and R3 using passive interface feature
B. No issue that is identified, this behavior is normal since default route propagated into RIPv2 domain by Router R1
C. RIPv2 enabled on R3, but R3 LAN network that is not advertised into RIPv2 domain
D. RIPv2 not enabled on R3
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 406
A. Traffic that is detined to 10.10.10.0/24 from R1 LAN network uses RIPv2 instead static route Because the static route AD that is higher than the AD of RIPv2
B. Traffic that is detined to 10.10.10.0/24 from R1 LAN network uses RIPv2 instead static route Because the static route AD that is configured is 255
C. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses static route instead RIPv2 Because the static route AD that is configured is less than the AD of RIPv2
D. Traffic that is destined to 10.10.10.0/24 from R1 LAN network uses static route insted RIPv2 But the traffic is forwarded to the ISP insted of the internal network
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 407
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 408
A. The GRE tunnel destination is not configured on the R2 router
B. The static route points to the tunnel0 interface that is misconfigured on the R2 router
C. The GRE tunnel destination is not configured on the Branch2 router
D. The static route points to the tunnel0 interface that is misconfigured on the Branch2 router
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 409
A. The PPP chap hostname and PPP chap password commands are missing on the Branch3 router
B. A PPP chap hostname mismatch is noticed between Branch3 and R1
C. PPP encapsulation is not configured on Branch3
D. A PPP chap password mismatch is noticed between Branch3 and R1
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 410
A. PPP CHAP is authentication configured between Branch1 and R1
B. The Branch2 LAN network 192.168.11.0/24 is not advertised into the EIGRP network
C. The Branch3 LAW network 192.168.10.0/24 is not advertsed into the EIGRP network
D. PPP PAP is authentication configured between Branch2 and R1
E. Tunnel keepalives are not configured for the tunnel0 interface on Branch2 and R2
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 411
A. EIGRP neighbor relationship was not formed due to AS mismatch between routers R1 and R2
B. IP address was misconfigured between the R1 interfaces
C. EIGRP neighbor relationship was not formed due to K velues mismatch between routers R1 and R2
D. EIGRP packets were blocked by the inbound ACL on R1
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 412
A. EIGRP packets were blocked by the inbound ACL on Branch2
B. The network 192.168.11.0/30 was not advertised into EIGRP on Branch2
C. The primary path has more link delay configured then secondary path which causes EIGRP to choose the secondary path
D. The IP address was misconfigured between the Branch2 and R2 interfaces
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 413
A. The tunnel source loopback0 interface is not advertised into EIGRP in Branch1
B. The EIGRP neighbor relationship was not formed due to the IP address being misconfigured between the R2 and R3 interfaces
C. The EIGRP neighbor relationship was not formed due to EIGRP packets blocked by the inbound ACL on R3
D. The tunnel source loopback0 interface is not advertised into EIGRP in R3
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 414
A. Branch2 LAN network 172.16.10.0/24 is not advertised into the EIGRP network
B. R3 server farm2 network 10.20.30.0/24 is not advertised into the EIGRP network
C. Branch1 LAN network 172.16.12.0/24 is not advertised into the EIGRP network
D. Branch2 LAN network 172.16.11.0/24 is not advertised into the EIGRP network
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 415
A. HQ>en
HQ#config t
HQ(config)#ipv6 unicast-routing
HQ(config)#ipv6 route ::/0 2001:DB8:B:B1B2::1
HQ(config)#ipv6 router ospf 100
HQ(config)#default-information originate
HQ(config)#int s1/0
HQ(config)#ipv6 ospf 100 area 0
HQ(config)#end
HQ#Config running-config starup-config
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 416
A.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 417
A.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference: