Sunteți pe pagina 1din 6

specifications

s4905
RUSSIAN GAS OIL (AGO):

Automotive Gas Oil - High Flashpoint: 66 min

The quality of the Gas Oil AGO delivered shall be of Russian Origin or Export Grade
specifications, including but not be limited to the following indicatively:

No: Test: Unit: Result:


○ ‫ס‬
1 Density @ 15 C Kg/m 20 C 0.87 max

2 Colour ASTM 3 max

‫ס‬
3 Flashpoint PMCC, C 66
‫ס‬
4 Kinematic viscosity cSt @ 37.8 C 1.6 – 5.5

5 Pour point ‫ס‬ C - 10.0 max


6 Cloud point C -5.0 max

7 Mercaptan sulphur 0.01 max

3
8 Acidity Mg/1000cm 5

9 Iodine number G/100g 6

10 Ash % wt 0.01 max

11 Total sulphur % wt 0.03

‫ס‬
12 Copper corrosion 3 hr @ 50 C 1A

13 CCR on 10% residues % wt 0.20 max

14 Citane index 55 - 57

15 Distillation range

* 50% recovered volume ‫ס‬ C 280

‫ס‬
* 90% recovered volume C 360

* Bacteria MBC Fiber/liter 500

* Bacteria CFU Fiber/liter 1000

Page 1 of 6
Fax: +31707536154 vladimirtsivis@mail.ru vladimirtsivis@hotmail.com Skype: gansrock
specifications

s4805
Russian Highspeed Diesel Gas Oil:

Automotive Gas Oil (AGO) - High Flashpoint: 66 min

The quality of the HSD2 Diesel delivered shall be of Russian Origin or Export Grade
specifications, including but not be limited to the following indicatively:

No: Test: Method: Specifications: Unit: Result:


1 Density @ 15 C ASTM D 4052-96 Report Kg/L 0.8443
ASTM D 1298-99 Report Kg/L -

L2.0
2 Colour ASTM D 1300-98 2.5 Max -

3 Distillatiion @ 90% Recovered ASTM D 86-00a 370 Max ○C 365.7


4 Kinematic Viscosity @ 40 C ASTM D 445-97 1.5 - 5.8 cSt 4.0 (Typical)

5 ASTM D 2622-98 0.2 - 0.4 Max wt% -


Sulphur
ASTMD 4294--03 0.3 Max wt% 0.3

6 Carbon Residue (10% Residue) ASTM D 4530-00 0.1 Max wt% < 0.1 (Typical)


7 Flash Point ASTM D 93-00 66 Min C 91.0

8 Total Acid Number ASTM D 974-97 0.25 Max mgKOH/g 0.1 (Typical)

9 Strong Acid Number ASTM D 974-97 Nil mgKOH/g Nil (Typical)

10 Water by Distillation ASTM D 95-99 0.05 Max vol % < 0.5 (Typical)

11 Ash ASTM D 482-00a 0.01 Max wt% 0.002 (Typical)

12 Cetane Index ASTM D 976-00 47 Min - 55


13 Pour Point ASTM D 97-96a +15 Max C +9

14 Sediment by Extraction ASTM D 473-95 0.01 Max Wt% < 0.1 (Typical)

15 Copper Corrosion ASTM D 130-94 1 Max 1a

Page 2 of 6
Fax: +31707536154 vladimirtsivis@mail.ru vladimirtsivis@hotmail.com Skype: gansrock
specifications

R4839
RUSSIAN GASOIL D2 L-02-62, GOST 305-82, D2 (0.02):

CETANE INDEX 45

RUSSIAN DIESEL-FUEL D2, GOST 305-82

COMPONENT UNIT MIN MAX


0.870
Density@ 20 deg C Kg / m3
0.840 (China Market)
Colour 2.0
Flach point, PMCC Deg C (°C) 57 62
Kinematic viscosity @ 20 deg C CST 3.0 6.0
Pour point Deg C (°C) (*) -10.0
Cloud point Deg C (°C) (*) -5.0
Mercaptan sulphur 0.01
Acidity, mg / 1000 cm3 5
Lodnie number g /100g 6
Ash %wt 0.01
Total sulphur %wt 0.02
Copper corrosion 3 hrs @ 50 C (typical) 1A
CCR on 10% Residues %wt 0.20
CETANE INDEX 45
Distillation range :
-50% Recovred Volume Deg C (°C) 280
-90% Recovred Volume Deg C (°C) 360
-Bacteria MBC Fibre / it 500
-Bacteria CFU Fibre / it 1000
Water %WT 0.02
Water and Sediments % volumeG/m3 0.10
Oxidation 25

Page 3 of 6
Fax: +31707536154 vladimirtsivis@mail.ru vladimirtsivis@hotmail.com Skype: gansrock
specifications

s4856
Russian Gas Oil GAS OIL L-0.2-62 (GOST 305-82), D2 (0.20):

The quality of Gas Oil delivered shall be of Russian Origin Export or Standard Grade and meet
305-82, L0.2-62 (GOST 305-82), higher sulphur content (0.20%), including but not limited to the
following specifications indicatively:

No INDICES OF QUALITY STANDARD ACCG. TO GOST


Показатели качества НОРМА ПО ГОСТ
1. Cetanic index, min 45
Цетановое число не менее
2. Fractional composition:
Фракционный состав:
- 50% is distilled under the temperature °C not more 280
- 50% перегоняется при температуре °С не выше
- 96% is distilled under the temperature °C not more 360
- 96% перегоняется при температуре °C не выше
3. Cinematic viscosity under 20° C cct 3.0-6.0
Вязкость кинематическая при температуре 20° C сст
4. Solidification °C, max -10
Температура застывания °C, не выше
5. Temperature of cloudiness °C, max -5
Температура помутнения °C, не выше
6. Flash point in closed crucible, °C, min 62
Температура вспышки, определяемая в закрытом тигле ° C, не
7. Fraction of total mass of sulphur in per cents max 0.2
Массовая доля серы не более (%)
8. Fraction of total mass of mercaptane sulphur per cents max 0.01
Массовая доля меркаптановой серы не более (%)
9. Content of hydrogen sulphide Is absent
Содержание сероводорода Отсутствует
10. Test on copper plate Passed
Испытание на медной пластинке Выдержано
11. Content of water – soluble acid and alkali Is absent
Содержание водорастворимых кислотощелочей Отсутствует
12. Content of actual tar mg on 100 cm³, of fuel, max 25
Содержание фактических смол мг на 100 см куб, не более
13. Content of water Is absent
Содержание воды Отсутствует
14. Acidity mg KOH on 100 cm³, of fuel, max 5
Кислотность мг КОН на 100 см куб топлива не более
15 Iodine index g of iodine on 100 g of fuel, max 5
Йодное число г. йода на 100 г. топлива не более
16 Density at 20°C, kg/m³, max. 860
Плотность при 20°C кг/ м³, не более

Page 4 of 6
Fax: +31707536154 vladimirtsivis@mail.ru vladimirtsivis@hotmail.com Skype: gansrock
specifications

R4737
Russian Gas-Oil L0.2-62, GOST 305-82, D2 (0.02):

The quality of Gas Oil delivered shall be of Russian Origin or Export Grade and meet GOST 305-
82, L0.2-62, lower sulphur content (0.02%), including but not limited to the following
specifications indicatively:

RUSSIAN DIESEL-FUEL D2, GOST 305-82

COMPONENT UNIT MIN. MAX.

Density @ 15° C Kg/m3 0.840

Colour 2.0

Flash Point, PMCC °C 57 62

Kinematic Viscosity @ 20° C CST 3.0 6.0

Pour Point °C (*) -10.0

CFPP °C (*) -10.0

Mercaptan sulphur °C (*) 0.01

Acidity, mg/1000 cm3 5

Lodine number g/100g 6

Lubricity@60 (HFRR WSD, ) 460

Ash % wt 0.01

Total Sulphur % wt 0.02 0.05

Copper corrosion 3hrs@50 ° C (typical) 1A

CCR on 10% Residues % wt 0.20

Cetane index 45

Water & Sediment (Volume, %) 0.02

Distillation range:

- 50% Recovered Volume °C 280

- 90% Recovered Volume °C 360

- Bacteria MBC Fibre / it 500

- Bacteria CFU Fibre / it 1000


(2) The result of -10°C Max in test item of Pour Point (CFPP shall only be applied for cargo delivered at discharge
port during from November 15 to February 28 of the next year)
NB: CFPP means “Cold Filter Plugging Point”.

Page 5 of 6
Fax: +31707536154 vladimirtsivis@mail.ru vladimirtsivis@hotmail.com Skype: gansrock
specifications

ba4802
RUSSIAN GAS OIL L0.2/62 HS-D2 L-0.2-62 (HSD2):

METHOD GOST 305-82 (LATEST EDITION)

The quality of the High Speed D2 ve Gasoil) delivered shall be of Russian Origin or Export
Grade specification, including but not be limited to the following indicatively:

CETANE NUMBER GOST 3122 (*) 45 MIN

ATMOSPHERIC DISTILLATION
50 VOL PCT DEG C GOST 2177/A 280 MAX
96 VOL PCT 360 MAX

COLOR INDEX 1.0 – 2.0

VISCOSITY AT 20 DEG C MM2/S GOST 33 3.0 - 6.0


POUR POINT (UPPER) DEG C GOST 20287/B (*) -10 MAX
CLOUD POINT DEG C GOST 5066/2 (*) -5 MAX

FLASH POINT DEG C GOST 6356 62 MAX

SULPHUR MASS PCT GOST R 51947 0.02-0.05 %

MERCAPTAN SULPHUR MASS PCT GOST 17323 (*) 0.01 MAX

HYDROGEN SULFIDE MASS PCT GOST 17323 (*) NIL

COPPER CORROSION 3 HRS @ 50°C GOST 6321 1A

WATER SOLUBLE ACIDS AND ALKALIS GOST 6307 NIL

GUM EXISTENT MG/100 CM3 GOST 8489 (*) 40 MAX

ACIDITY MG KOH/100CM3 GOST 5985 (*) 5 MAX

IODINE NUMBER GI2/100G GOST 2070/A (*) 6 MAX

ASH MASS PCT GOST 1461 0.01 MAX

CONRADSON CARBON RESIDUE ON 10% MASS PCT GOST 19932 0.20 MAX

FILTRATION FACTOR GOST 19006 3 MAX

MECHANICAL ADMIXTURES MASS PCT GOST 6370 NIL

WATER CONTENT VOL PCT GOST 2477 NIL

DENSITY AT 20°C G/CM3 GOST 3900 0.86 – 0.87

CFPP DEG C GOST 22254 (*) -5 MAX

BACTERIA MBC 0 - 500


FIBRE/IT
BACTERIA CFU 70 – 1000
(*) Summer from March to October - (PP –5.0°C)
- (CP 0°C )
Winter from November to February - (PP –10.0°C)
- (CP –5.0°C )

Page 6 of 6
Fax: +31707536154 vladimirtsivis@mail.ru vladimirtsivis@hotmail.com Skype: gansrock

S-ar putea să vă placă și