Sunteți pe pagina 1din 2

ES-CSM-61

For Balancing and Flow Measurement Applications


Job Name Contractor Approval Job Location Engineer Approval

Contractors P.O. No. Representative

Series CSM-61
Flow Measurement Valves
Sizes: 12" 3" (15 80mm)
Series CSM-61 Flow Measurement Valves are designed for application on low or medium flow rate HVAC units. Their compact size allows for easy installation and use in crowded piping compartments. The CSM-61s ball-type design, extended throttling range, and large indicator plate, make for highly accurate flow measurement, even in very low flow ranges. The CSM-61s positive memory feature is easy to see, access, and operate, facilitating system balancing and flow measurement. These valves are also bi-directional, so there is no chance of installing the valve in the incorrect flow direction. Series CSM-61 valves provide positive shutoff, eliminating the need for a separate service valve. The solder style CSMs may be installed without disassembly, saving costly installation time. These valves are also provided with blowout proof stems. Use, misuse, corrosion, or wear will not allow the stem to blowout, releasing pressurized hot or chilled water.
Sweat

CSM-61

Threaded

BAA/ARRA Compliant*
*This product complies with the Buy American Act and The American Recovery and Reinvestment Act. For more information, visit watts.com.

Features
Accurate flow measurement Easy to use memory Bi-directional flow Positive shutoff Safe blowout proof design Available with threaded and solder end connections Integral drain port

Typical Installation
Fan Coil Unit
Series CSM-61 Fan Coil Unit

Applications
Fan coil units Water source heat pumps Reheat coils Panel coils Small branch lines Unit heaters Unit ventilators Finned radiation Small domestic hot water lines Convectors Small pumps
Series CSM-61 Series CSM-61

Pump and Branches


Series CSM-61 Series CSM-61

Specifications
A flow measurement valve shall be installed on each hot/chilled water unit or as otherwise shown on plans. The valve shall be of the bi-directional, blow-out resistant, tight shutoff, ball design, with position indicator, memory device, checked metering ports with drip caps and integral drain ports opposite the metering ports. The valve shall be a Watts Regulator Company Series CSM-61.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

Installation
Generally locate the valve five pipe diameters downstream from a fitting with two diameters downstream from the balancing valve free from fittings. If a balancing valve is located downstream from a circulation pump, allow a distance of ten (10) diameters between the pump and balancing valves.

Pressure -Temperature
Pattern Solder Size 12"-1" (15-25mm) 114"-2" (32-50mm) Thread
CSM CSM PUMP 2D 10D
12

"-3" (15-80mm)

Working Temp F C 200* 93 250 ** 121 200* 93 250 ** 121 250 121

Max. Working Pres. psi bars 100 7 200 14 90 6 175 12 300 21

2D

5D

*Note 1: Solder used in joints: 50-50 Tin Lead (ASTM B32 Alloy Grade 50A) **Note 2: Solder used in joints: 95-5 Tin Antimony Viton is a registered trademark of Dupont Dow Elastomers

Materials
Housing/Body Packing Material Pressure Taps Seats Bronze Viton 12" 2" (15 50mm) Neoprene 212" 3" (65 80mm) Brass 14" SAE 45 Flare
12

Carbon/Glass filled PTFE " 1", 3" (15 25, 80mm) Virgin PTFE 114" 2" (32 50mm) Brass

Drain Plug

Dimensions - Weights

D A R

Model

Size (DN) A C mm 68 79 97 116 123 153 60 67 80 94 100 114 165 173 in. 158 11116 178 178 2 2916 158 11116 178 178 2 2916 418 438 in. 21116 318 31316 4916 478 6 238 258 318 334 31516 412 612 61316

Dimensions D mm 41 43 47 47 50 66 41 43 47 47 50 66 104 112 in. 12 916 1316 118 1516 1916 12 916 1316 1 1116 1516 2316 278 mm 13 15 20 29 33 40 13 15 20 25 27 33 55 73 in. 134 178 2116 2316 2516 258 134 178 2116 2316 2516 2916 318 358 R mm 45 47 52 56 59 67 45 47 52 56 59 66 80 92

Weight lbs. 1.0 1.3 1.8 1.5 1.9 3.4 1.0 1.3 1.9 1.9 2.3 4.0 13.0 17.0 kgs. 0.45 0.59 0.82 0.68 0.86 1.54 0.45 0.59 0.86 0.86 1.04 1.81 5.90 7.71

in. mm 12 CSM-61-M1-S 15 34 CSM-61-M1-S 20 CSM-61-M1-S 1 25 CSM-61-M2-S 114 32 CSM-61-M2-S 112 40 CSM-61-M2-S 2 50 12 CSM-61-M1-T 15 34 CSM-61-M1-T 20 CSM-61-M1-T 1 25 CSM-61-M1-T 114 32 CSM-61-M1-T 112 40 CSM-61-M1-T 2 50 CSM-61-M1-T 212 65 CSM-61-M1-T 3 80 Suffix: S = Solder Ends, T = Threaded Ends

A Watts Water Technologies Company

USA: No. Andover, MA Tel. (978) 688-1811 Fax: (978) 794-1848 www.watts.com Canada: Burlington, ONT. Tel. (905) 332-4090 Fax: (905) 332-7068 www.wattscanada.ca

ES-CSM-61 1038

2010 Watts

S-ar putea să vă placă și