Documente Academic
Documente Profesional
Documente Cultură
• Fast measurement
• Inherently safe
• High accuracy
• Easy to use
• Proven reliability
DESCRIPTION APPLICATIONS
The ICS Cable Height Meter is a handheld meter Applications include height measurement of:
for measurement of cable sag, cable height distance,
and overhead clearance of conductors. It is a modern · Telephone lines
alternative to telescopic measuring poles. The SupaRule
Cable Height Meter utilises ultrasonic signals to · Distribution lines
determine the height of overhead cables up to 23m · Transmission lines
(75feet).
· Cable television
Used by line operators within the utilities industries, · Street lighting
e.g., electricity and telecommunications, the CHM190
measures the height of a single wire, the CHM300 and · SAG (lowest point to ground)
CHM300E measure up to 3 wires, while the CHM600 · Clearances on construction sites
and CHM600E models measure up to 6 wires.
The unit also provides a safer way to measure cable
heights on highly congested roadways. Additionally the
HOW IT WORKS Cable Height Meters offer an easy way to check whether
the device has remained in calibration since its purchase
The Cable Height Meter emits short bursts of sound
date. Switching to ‘CAL’ mode also allows the
which originate from the cone-shaped transmitter.
instruments to be used indoors.
The microprocessor in the instruments calculates the
elapsed time for the bursts of sound to be reflected
from the cable back to the instrument. The result can be
displayed in either feet and inches (imperial), or meters FEATURES AND BENEFITS
(metric) format.
· Quick Measurement - saves time and money
To account for the fact that speed of sound varies with
temperature, a temperature sensor, mounted at the · Inherently safe — No physical connection to cables or
front of the instruments, senses the actual air wires required to obtain measurement
temperature, and automatically compensates.
· Extremely Accurate — measures to accuracy of 0.5%
- Warranty - 2 year
Range (25mm cable min) 3 –15m (10-50ft) 3 –15m (10-50ft) 3 –23m (10-75ft) 3 –15m (10-50ft) 3 –23m (10-75ft)
Range (12mm cable min) 3 –15m (10-50ft) 3 –15m (10-50ft) 3 –15m (10-50ft) 3 –15m (10-50ft) 3 –15m (10-50ft)
Range (5.5mm cable min) 3 –12m (10-40ft) 3 –12m (10-40ft) 3 –12m (10-40ft)
Range (2.5mm cable min) 3 –10m (10-33ft) 3 –10m (10-33ft) 3 –10m (10-33ft)
No. of wires measured 1 3 3 6 6
Accuracy 0.5% ± 2 digits
PERFORMANCE
ORDERING INFORMATION
DESCRIPTION APPLICATIONS
The ICS CHM 300DT Cable Height Meter is a Applications include height measurement of:
handheld meter for measurement of cable sag, cable
height distance, and overhead clearance of
conductors. It is a modern alternative to telescopic · Telephone lines
measuring poles. The CHM 300DT Meter utilises · Distribution lines
ultrasonic signals to determine the height of
overhead cables up to 15m (50feet) · Transmission lines
· Cable television
Used by line operators within the utilities industries, e.g.,
electricity and telecommunications, the CHM300DT · Street lighting
measures the height and separation of up to 3 wires. · SAG (lowest point to ground)
The CHM300DT has the additional feature of measuring
horizontal distances up to 150 feet (45m), with the aid of · Pole Span
the optional Dynamic Target(DT80). · Distance measurement across busy roadways
· Clearances on construction sites
HOW IT WORKS
The Cable Height Meter emits short bursts of sound FEATURES AND BENEFITS
which originate from the cone-shaped transmitter.
The microprocessor in the instruments calculates the · Quick Measurement - saves time and money
elapsed time for the bursts of sound to be reflected
from the cable back to the instrument. The result can be · Horizontal Measurement — when used with optional
displayed in either feet and inches (imperial), or meters DT80, measures horizontal distances to 45m
(metric) format.
To account for the fact that speed of sound varies with · Inherently safe — No physical connection to cables
temperature, a temperature sensor, mounted at the or wires required to obtain measurement
front of the instruments, senses the actual air
temperature, and automatically compensates. · Extremely Accurate — Measures to accuracy of 0.5%
When used with the DT, the transmitted signal from the
300DT is detected by the DT, which then generates and · Ease-of-use — Simple, three button operation
sends back a new signal. In this way, the measurement Ensures fast, effective measurements with a
range can be almost tripled. Minimum of operator training
PERFORMANCE
ORDERING INFORMATION
DESCRIPTION APPLICATIONS
The ICS DT80 is an accessory for use with the The DT80 adds considerable extra functionality to the
Suparule CHM300DT Cable height Meter, enabling it CHM300DT. It allows the user to measure horizontal
to be used for horizontal, as well as vertical distance distance as well as the vertical height to overhead
measurement. On its own, the CHM300DT is used for the cables.
measurement of the height of up to 3 overhead cables,
to a maximum of 15m. When used with the DT80 One of the key requirements for overhead line
theCHM300DT can measure horizontal distances technicians is to identify the minimum clearance of
overhead cables. The minimum clearance is normally
up to 45m. at the lowest sag point in the cable. With the facility
This range of 45m allows the utility linesman to quickly to measure horizontal distances up to a diameter of 80
identify the mid-point between two poles, i.e. the point at meters (45m in each direction), the user can easily
which the maximum sag of the overhead line occurs. The locate the centre point between two cable supporting
vertical height of the overhead line at this point can then poles, and therefore identify the point where the
be measured with the CHM300DT. overhead cable is at its lowest sag. The CHM300DT
can then be used to accurately measure the overhead
cable height at this point.
OPERATION Multiple DT80’s used in conjunction with the
CHM300DT can also facilitate triangulation and similar
The CHM operates by sending an ultrasonic signal to the complex calculations in surveying applications.
target. The signal is rebounded off the target, and the echo
received back at the CHM. The CHM measures the time
between the transmission of the signal, and the reception SPECIFICATIONS
of the echo. Knowing the speed of sound in air, the unit
then calculates the distance travelled by the signal, and
therefore the distance to the target. Range with CHM300DT > 45m
When used with the DT80, the signal transmitted from Accuracy ± 5 mm
the CHM300DT is received by the DT80. The DT80 then
transmits a new signal back to the CHM. Because each Operating -10 ºC to +40 ºC
signal can travel directly from source to target without Temperature Range
losing strength by rebounding, the overall measurement
distance is considerably increased (almost 3 times) from Weight 200g
the normal CHM range. Dimensions 85 x 85 x 55 mm
Battery Type 9V Block
Battery Life 63 hours (continuous)
Housing Rating IP53
Warranty 2 year