Documente Academic
Documente Profesional
Documente Cultură
Instructions to Activate Tech Tool after you have done a proper installation:
(corrected by stranger for MHHauto)
1. Copy zzz.cmd, zzz.exe and zzzz.exe to C:\
2. Run zzz.cmd as Administrator
3. Open Tech Tool and exit at the Login window. This step is very important!!!
4. Copy files from\LOGIN to C:\Program Files (x86)\Tech Tool\Tech Tool\Login, replacing the existing ones WRONG !!!
(IF YOU DO THIS STEP – YOU’LL GET BAF10003 ERROR DURING TECH TOOL START)
Don’t touch Login folder and don’t move/replace any files !!!
5. Go to Start, and type services.msc in the box. Press enter to open Services (local)
6. Stop the Volvo Tech Tool Service Controller service
7. Go to C:\ and run zzzz.exe as Administrator
8. Change the name and address details to the ones you want.
You can change the User ID to something easier if you like, or leave it as M112233
Choose User type "Developer"
Click the "No connection to central" tickbox
9. Click "create DB with new key". Wait for the message box to show DB created. Exit.
10. Go back to Services
11. Start the Volvo Tech Tool Service Controller service
12. Find and start the Microsoft .NET Framework NGEN Common service
13. close Services
Start TechTool, enter the User ID (default was M112233), click "Work offline" and click OK.
Scroll down to the bottom of the T&C box, and choose Accept.