Documente Academic
Documente Profesional
Documente Cultură
t
i
o
n
M
a
g
tr
e
o
WELD OUTLINE CASE Table 9-6 from "Mechanical Engineering rL oDesign", Shigley, 7t
ie
v
a
g
e
Schedule A: Allowable Load forl Various Sizes of Fi
i
Weld is adequate & stress ratio = 0.86 n
INPUT 6 * To 1/4 incl.
Weld Outline Case: 3 Over 1/4
Strength Level of Weld Metal: 70* Over 1/2
Loading condition for bending, ie…Cantilever or Mid-Span
of Simply Supported Beam N/A τ
Over 3/4
w= 6mm 1/4 in Over 1 1/2
P= 105 KN 23.60 kip If no tension or compression is present, P = 0 Over 2 1/4
V= 5.17 KN 10.00 kip If only tension or compression is present, V = 0 7 Over 6
b= 100 mm 4 in Weld dimension; refer to figure on right ###
d= 50 mm 2 in Weld dimension; refer to figure on right Not to exceed the thic
l= 0 in If bending is not to be considered, l = 0