The Plant Design Management System (PDMS/E3D) Principal Administrator Job
description.
• Produce/ prepare 3D Implementation plans in line with client Specification/requirements.
• Conversant with ExxonMobil GPs Requirement regarding PMDS/E3D specifications/ procedure/requirements for multiple platforms CATS/SPECS/MACRO database set up. • Project set up, maintenance and support of the system. • The PDMS/E3D administrator will maintain all areas of the 3D model environment for stability and maintenance. • The Administrator shall ensure the modeling environment works appropriately in regard to the generation, control and distribution of 3D model interfaces. • Project set-up, administration and user support for Aveva PDMS/E3D/E3D. • Full and through knowledge of PDMS/E3D Ver 12.1.0.14, E3D, Paragon, PML, CATS & SPECS • Review overall plot plan of the project & divide the plant to optimum number of construction areas in consultation. • Understands the scope of each project and has the capability to create PDMS/E3D database structures that will enable the 3D design and subsequent creation of deliverables from the project databases. • Create PDMS/E3D model based on 3D modeling procedure with the required databases, teams and users and access rights according to PDMS/E3D Administration, Audit & control. (Establish procedures/specifications for projects and company standards relating to use of PDMS/E3D.) • Responsible for end-user training on the usage of customization. This includes class room/remote training and preparation of training material. • Interact directly with users/discipline leads and document requirements and special needs related to project designs and needs. • Coordinate with the designers from the respective engineering disciplines to meet the project deliverables with timeliness and quality. • Troubleshoot and escalate appropriately any technical issues and follow-up for quick resolution. • Project specific customization of system and writing macros as per project needs and for further checking the quality of PDMS/E3D outputs. • Follow established PDMS/E3D standards, Setup the PDMS/E3D and related systems, Maintain the PDMS/E3D project, Provide direction and support to designers • Provide ad hoc reports from PDMS/E3D or related databases • Develops staffing schedules to ensure the most advantageous utilization of available equipment. • Assists in developing plans for hardware and/or software purchases • Coordinates installation of new systems with user schedules • Oversees and provides technical support for customized tools, utilities and scripts to automate work processes and improve CAD productivity and efficiency; oversees and participates in performing daily maintenance on CAD databases, including researching and reconciling inconsistencies and variations in data • Perform routine checks on model through data verification and project auditing. • Create required reports from PDMS/E3D model for Layout / Material groups. • Extract MTO from PDMS/E3D model for uploading to VPRM or any material management system used in the project. • Upload specification files generated by VPRM in PDMS/E3D & check the completeness and correctness of items uploaded in PDMS/E3D. • Setup ISODRAFT module for generating isometrics as per project & client specifications / documents & resolve and trouble shoot isometric errors. • Update model review files in NAVIS WORKS format on daily basis and copy them to project server for the use of all discipline engineers. • DESIGN-Equipment, Piping, Structural, Access ways. • ISODRAFT-ISODRAFT Customization as per the Requirements, Bolt table, Backing Sheet. • DRAFT-Administration -Administration & Drafting. • AUTO DRAWING PRODUTION METHODOLOGY(ADP) • PARAGON(CATS)-Piping, Steel, Instrument, Catalogue creation & updating • SPECON (SPECS)-Piping, Steel, Instrument, Spec creation.& updating • LEXICON-UDA creation. • PROPCON-Properties Table Creation. • ADMIN- Project Set up, Access Control, Project Creation, configurations • MDS- Multi Discipline Support setup and customization • Reports Customization as per the requirements • Customization and creating routine for 3D Model file export and import integration with fabrication detailing software & Engineering analysis software. • Creation and preparation Of Macro from PML Suitable For Any PDMS/E3D Module and PML-2 Object orientated programming. • Transfer of specification Generated in other to PDMS/E3D & Generation of specification from piping specification. • Proficient in uploading of backing sheet in PGA`s & Isometrics as per project need. • Report Extraction as required with project suit. • PDMS/E3D suite of software installation and trouble shooting • PDMS/E3D project architecture and Databases • Well versed in P&ID`S, other department drawings like equipment G.A.D, Hook up etc. • Co-Ordination with other department for generation of Catalogue & clash free model. • Familiar with pipe supports & CEASER-II software. • Conversant with international codes and standards such as ANSI, ASTM, API, ASME and BS. • Detailed piping specification, valve specification, specialty items specification, Material selection/ specialty items creation from primitive on E3D.