Documente Academic
Documente Profesional
Documente Cultură
With the assistance of our diligent team of professionals, we have become competent enough to offer
our esteemed clients with high quality Extruded Polystyrene Thermal Insulation Board at market leading
prices.
Description:
INSU board – Extruded Polystyrene (XPS) is a rigid foam board having 100% closed cell structure and is
produced in a fully automated continuous extrusion process in accordance with international
specification and standards. Its unique properties of high compressive strength and low water
absorption makes it an ideal insulating material for foundations, walls, roofs and floors.
Key Features:
The cost of energy and demand for air-conditioning in buildings is constantly increasing
Properties:
There is no change in the K value (Thermal conductivity) of the material after prolonged usage and
hence the heat flow to the system remains intact
Water Vapour - INSU board closed cell structure provides exceptional resistance to water permeability
Density - INSU board has a uniform high density of 34-36 kg/m3 (Std.) and depending upon the thickness
compressive strength ranges from 300 to 400 k.Pa., which makes it an ideal solution for over deck
insulation & floor insulation in cold storages
Application:
INSU board is ideal for energy conservation and efficiency in a wide range of industrial and commercial
buildings and in private dwellings.
Test Certificate:
Water Vapour Permeability ASTM E 96/DIN 52615 Mg/h mPa 0.4-0.6; 50-200
Properties shown are representative values for 50mm thick material tested at 24 ± 1o C
Note: This is a system generated Report, hence does not require any signature.