Documente Academic
Documente Profesional
Documente Cultură
6, June 2019
E-ISSN: 2321-9637
Available online at www.ijrat.org
OH
the creation of nanoparticles depends upon the molecular Structure of H2 C
O
Guargum O HO
mass of the galactomannan, solvent, surfactant, cross-linker O
HO
OH
O OH
O
HOH2C
and agitation. The particle size can be determined by
scanning electron microscopy studies such as DLS, UV and Guargum Powder
STMP
SEM. The morphology and size of the gum Nano particles are NaOH
determined by increased technique created spherical Glycerol Span80
doi: 10.32622/ijrat.76201928 44
International Journal of Research in Advent Technology, Vol.7, No.6, June 2019
E-ISSN: 2321-9637
Available online at www.ijrat.org
O/W Emulsion
C. DLS Analysis
Glycerol
Particle size and DLS measurements the common hydraulics
diameter of the nanoparticles determined in water at 25 °C by
Nano Emulsion
dynamic lightweight scattering measurements employing a
Malvern Zeta size ZS90 (Malvern Instruments, Worcester,
NaoH STMP (Cross linker) Tri sodium UK). The same Instrument allow the determination of 3
trimetaphasphate
measurements and polydispersity index (PDI). Additionally,
period of time dynamic nanoparticle image was achieved by
Cross linked Nano particles in preparative media
nanoparticle following analysis (NTA) employing a Nano
After that again Wash and sight LM10 instrument prepared with a sample chamber with
Centrifugation
Centrifugation a 532nm optical maser and a 560 nm long pass filter. The
particle size was calculated exploitation the Stokes–Einstein
Cross linked Nano particles in preparative media
GG STMP
Size SDn PD
Batch concentrati concentrati
m I
on (%) on (%)
GGNP 0.5 10 780±1.4 0.5
doi: 10.32622/ijrat.76201928 45
International Journal of Research in Advent Technology, Vol.7, No.6, June 2019
E-ISSN: 2321-9637
Available online at www.ijrat.org
E. SEM ANALYSIS
SURAFCE MORPHOLOGY
Fig 5: (a) Guar gum with solvent (b) after addition of The surface morphology of nanoparticles was studied by
cross linker STMP scanning microscopy employing a(SEM Jeol JSM-6060LV)
Instrument. Sample were placed on stumps, dehydrated
with chemical element Associate in Nursing covered with
golden alloy in a chemical element atmosphere (current 20
mA, pressure 10e-3 Pa (employing a coater (Quorum, Q
150RES)).
doi: 10.32622/ijrat.76201928 46
International Journal of Research in Advent Technology, Vol.7, No.6, June 2019
E-ISSN: 2321-9637
Available online at www.ijrat.org
REFERENCES
[1] N.V.Ravi Kumar, Nano and Micro particles as controlled drug delivery
devices,JPharma Pharmaceut Sci,2000,3(2):234-258.
[2] Sunil A. Recent advances on chitosan –based macro-and nano particles
in drug delivery, Journal of controlled Release 100 (2004) 5-28.
[3] Ashutosh Kar, Text book of Pharmaceutical Drug analysis, ISBN (13),
P293-311.
[4] Patel VM, PrajapatiBG, PatelMM.Design and characterization of
chitosan-containing mucoadhesive buccal patches of propranolol
hydrochloride. Acta Pharms 2007 ;57:61-72.
[5] Badawi AA, EI-Laithy HM, EI Qidra RK, EI Mofty H,EI dally M.
Chitosan based nanocarriers for indomethacin ocular delivery. Arch
Pharm Res 2008;31:1040-
[6] T.Akagi, M.Higashi, T.Kaneko, T.Kida, M.Akashi, Bio
macromolecules 7(2006)297-303.
[7] V.P.tarchilin,pharm.RES.24(2007)1-
[8] Sperling R. A., Gil P. R., Zhang F., Zanella M., Parak W.,
Fig.7(d) Guar gum particles ―Biological applications of goldna nopartticles‖,J., Chem. Soc. Rev.,
vol.37,pp. 1896-1908,2008.
[9] Weibo C., Ting G., Hao H., Jintao S., ―Applications of gold
nanoparticles in cancer nanotechnology‖, Nanotechnology Science
V.RESULT AND DISCUSSION
Applications, I, pp. 17-32, 2008.
The scanning electron microscope (SEM) is one among the [10] Devika B.Ch.,Arezou A.G., Warren C.W., ―Determining the size
foremost versatile instruments on the market for the and shape Dependence of nanoparticle -Uptake into Mammalian
investigation and analysis of the microstructure morphology Cells‖,Nano Letters, vol. 6,pp. 662-668,2006.John M.T., Pure& Appl.
and chemical conformation characterization. Guar gum Nano Chem., 60,pp. 1517-1528,1988.
particles were investigated by SEM as show Fig-7(a, b) The [11] Klaus, E.; Marion, L.; Martin, M., Matthias, P.;Helmut, S., Method for
manufacturing substrates with transparent and color coating stable at
doi: 10.32622/ijrat.76201928 47
International Journal of Research in Advent Technology, Vol.7, No.6, June 2019
E-ISSN: 2321-9637
Available online at www.ijrat.org
AUTHOR PROFILE
doi: 10.32622/ijrat.76201928 48