Documente Academic
Documente Profesional
Documente Cultură
A 14-NOVEMBER‐2018 APPROVAL
Project
Cairo West Supercritical Power Station
1x650 MW
Owner
Cairo Electricity Production Company (CEPC)
Supplier
VEOLIA
Document Description
Sealant
PGESCo. Document No.:
10089‐1E‐V11‐ATJS‐00001
Reference Item
Specification No. 99999-9-3SS-ATJS-00001
Design By MW
Supplier Document No.: Rev. Page 1
Checked By AA
Approved By AK
Date 10-JAN‐2019
Cairo west Supercritical Power
Project Station 1 x 650 MW Steam Power
Station
REV B
Description Non-Fire rated Joint Sealant
Technical Specifications
9999-9-3SS-ATJS-00001
Manufacture BASF
Country of Origin EGYPT
Applied for the sealing of joints of
Application REV B non-fire rated areas
(Chlorination building, Condensate Polisher Building, Water
Treatment Building, Potable Water Cylinders Room)
For more technical details please refer to the attached data
sheets
Cairo West Supercritical Power
Station 1x650 MW
PROJECT N°: 10089
Document Title: Non-Fire rated Joint Sealant
COMMENT REPLY
MasterSeal® NP 472
One part polyurethane based elastomeric joint sealant
ADVANTAGES
APPLICATION
Durable resilient seal
Preparation:
Non-staining
To ensure excellent adhesion the joint profile
Primer-free (except M1 smooth mortar) including the arises should be clean, sound, dry
Demonstrates good resistance to dilute acids and free from any loosely adherent material
and alkalis which could prevent adequate bond to the
Different colours available substrate.
COLOURS Application:
MasterSeal NP 472 is available in: MasterSeal NP 472 shall be applied using a
Concrete Grey (RAL 7004), Off White (RAL conventional sealant application gun, ensuring
1015) and White (RAL 9010) enough sealant is applied to facilitate the correct
width to depth ratio for the joint. Following the
application the sealant must be tooled into place
STANDARDS to ensure adequate adhesion with the joint
Conforms to ISO 11600 Class F25LM on profile is achieved. Finally tool to a neat finish
anodized aluminum and mortar. using a solution of soap and water onto a gloved
Conforms to ASTM C920 Type S, Grade NS, finger or tooling stick.
Class 25, Use T1, NT, A and M
Conforms to DIN 18540
REV B
MasterSeal® NP 472
BASF_CC-UAE/Sl_472_11_05/v7/05_17
The technical information and application advice given in this BASF publication are based on the present state of
STATEMENT OF our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be
RESPONSIBILITY made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for
checking the suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF either
NOTE orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since they, and not
BASF, are responsible for carrying out procedures appropriate to a specific application.
BASF Construction Chemicals UAE LLC Disclaimer: the LRQA mark relates
P.O. Box 37127, Dubai, UAE to certified management system and
Tel: +971 4 8090800, Fax: +971 4 8851002 not to the product mentioned on this
www.master-builders-solutions.basf.ae datasheet
REV B
Spec_Cl_MSeal_NP_472_06/17
Specification Clause
MasterSeal® NP 472
Description
MasterSeal NP 472 is a high performance one component, moisture curing, polyurethane construction
sealant. In properly designed and constructed joints the product has been formulated to offer a non - slump
elastomeric seal, which exhibits good skin formation time and a fast cure.
Where indicated on the contract documents the elastomeric joint sealant shall be MasterSeal NP 472
manufactured by BASF Construction Chemicals UAE LLC.
Standards
BS EN ISO 11600 Class F25LM on anodized aluminum and mortar.
ASTM C920 Type S, Grade NS, Class 25, use T1, NT, A and M.
Conforms to DIN 18540
The product shall be manufactured by a company certified to confirm to the requirements of the
quality, environmental and occupational health & safety standards of ISO 9001, ISO 14001 and
OHSAS 18001
The technical information and application advice given in this BASF publication are based on the present
state of our best scientific and practical knowledge. As the information herein is of a general nature, no
assumption can be made as to a product's suitability for a particular use or application and no warranty as to
its accuracy, reliability or completeness either expressed or implied is given other than those required by law.
The user is responsible for checking the suitability of products for their intended use.
For additional information please consult the product Technical Data Sheet.
BASF Construction Chemicals UAE LLC can provide a full project specification and method statement on
request.
BASF Construction Chemicals UAE LLC P.O. Box 37127, Dubai, UAE
Tel: +971 4 8090800 Fax: +971 4 8851002 www.master-builders-solutions.basf.ae