0 evaluări0% au considerat acest document util (0 voturi)
23 vizualizări5 pagini
The document provides instructions for handling a PLC training kit. It outlines 7 steps: 1) Unbox the kit carefully, 2) Remove it from the package, 3) Remove the kit's cover, 4) Connect the power supply, 5) Connect one end of a LAN cable to the kit's RJ45 connector, 6) Connect the other end of the LAN cable to a PC, and 7) Switch on the power supply. The goal is to properly unpack, connect power to, and network the PLC training kit according to the supplied steps.
The document provides instructions for handling a PLC training kit. It outlines 7 steps: 1) Unbox the kit carefully, 2) Remove it from the package, 3) Remove the kit's cover, 4) Connect the power supply, 5) Connect one end of a LAN cable to the kit's RJ45 connector, 6) Connect the other end of the LAN cable to a PC, and 7) Switch on the power supply. The goal is to properly unpack, connect power to, and network the PLC training kit according to the supplied steps.
The document provides instructions for handling a PLC training kit. It outlines 7 steps: 1) Unbox the kit carefully, 2) Remove it from the package, 3) Remove the kit's cover, 4) Connect the power supply, 5) Connect one end of a LAN cable to the kit's RJ45 connector, 6) Connect the other end of the LAN cable to a PC, and 7) Switch on the power supply. The goal is to properly unpack, connect power to, and network the PLC training kit according to the supplied steps.