Documente Academic
Documente Profesional
Documente Cultură
www.speedcrete.co.uk
email: sales@speedcrete.co.uk
Catalogue Number 5
Hire it!
Bunyan Striker AND GENERAL CONDITIONS OF SALE
Units and Tubes GENERAL CONDITIONS FOR THE HIRING OF EQUIPMENT 13. INSURANCE AND RESPONSIBILITY FOR LOST, STOLEN OR DAMAGED EQUIPMENT
The Hirer agrees to pay the Supplier the full replacement cost of any Equipment which is lost or stolen
Multivibe Screeder penultimate day of the said three months, restore the Equipment to the Supplier. Equipment not
restored to the supplier will be subject to a charge equating to the financial loss to the supplier.
of any of the Suppliers rights hereunder.
6. RESPONSIBILITIES OF THE HIRER AND PERSON MAKING THE CONTRACT GENERAL CONDITIONS OF SALE
• Floater bars 1.8m, 2.4m, 3.0m, 3.65m, The person making the contract warrants that he has authority of the Hirer to make this contract on the
DEFINITIONS AND LAW
4.2m & 4.8m Hirer’s behalf and hereby agrees to indemnify the supplier against all losses and costs that may be
incurred by the supplier if this is not so. The said person and Hirer jointly and severally hereby The complete contract is the documents that set out the Conditions and all other details relevant to a
undertake to ensure that no-one uses the Equipment who is not properly instructed in it’s safe and particular transaction and is hereinafter referred to as the ‘Contract’.
proper operation and to ensure that every user is in possession of instructional material (if any)
supplied by the supplier and will not allow the Equipment to be misused. The goods sold by the Seller to the Buyer shall hereinafter be referred to as the ‘Goods’.
The parties to the Contract are the Seller of the Goods and the Buyer as described in the Contract.
Pedestrian
8. RESPONSIBILITY OF HIRER These conditions have effect in substitution for, and to the exclusion of, any condition put forward by
Heads The Hirer will be responsible for the loading and unloading of the Equipment at the address specified the Buyer.
by the Hirer, and likewise at the suppliers premises when transported by the Hirer, or his agent and This contract shall be governed by and construed in accordance with the law of Scotland.
• Lightweight
Powerfloats
any person supplied by the supplier shall be deemed to be an employee of the Hirer or his agent at
such times. RISK AND TITLE TO GOODS
Hummer c/w The Hirer’s responsibility for the Equipment commences on the receipt of the Equipment of the Hirer The risk in the Goods shall pass to the Buyer immediately on delivery to the Buyer or to the Recipient.
or his agent or on delivery as requested and ends only when the Hirer is in possession of the
• 24” Pedestrian c/w 1.2m shaft & a supplier’s unqualified receipt for all the Equipment. The Hirer will not sell or otherwise part with The ownership of the Goods shall remain with the Seller (with the right to dispose of the Goods) until
control of the Equipment. all Goods which have been supplied at any time by the Seller to the Buyer have been paid for in full.
Blades and Pans. short 2" head The Hirer will at all times and in all respects indemnify the supplier against and from, any and every
Until such time as aforesaid the Buyer shall hold the Goods as bailee and fiduciary for the Seller and
shall be under an obligation to return the Goods on demand.
expense, liability, financial loss, claim or proceedings whatsoever and in respect of any personal
Edging Float - • Electric High injury whatsoever or damage to or loss of any property whatsoever (other than the Equipment itself
which shall be governed by conditions 13 & 14) arising out of or in connection with or consequent
RECEIPT
'up close and personal'. Frequency upon the delivery, use, non-use, repossession, collection, return or non-return of the Equipment or The Buyer, or on behalf of the Buyer, shall receive and unload the Goods and shall check the same for
any part thereof. quantity and condition in the presence of the Carrier. If there is a shortage or if the Goods are in an
• 36” Pedestrian c/w Nothing in this clause shall effect the statutory rights of the Hirer or purport to exclude any liability
which may not be excluded under the Unfair Contract Terms Act 1977 or any statutory modification
unsatisfactory condition, the Buyer or Recipient must so endorse the Carriers delivery document and
must give separate written notice thereof to the Seller within three days of delivery. If this Condition
is not observed, no claim in respect of shortage or of unsatisfactory condition of the Goods will be
Blades and Pans thereof.
entertained. This Condition does not effect the Statutory rights of the Buyer.
9. ELECTRICAL EQUIPMENT
PAYMENT
Powerfloats available with Where the Equipment is electrical in part or in whole it should normally be used with plugs and/or
Where monthly account facilities have been granted to the Buyer in writing, all invoices must be paid
sockets as fitted but if temporarily fitted with other suitable plugs or sockets this must be carried out
combination or finish blades by a competent person who must also reinstate it to it’s original condition. It will be the Hirer’s by the last day of the month following the month of delivery. Where no such facilities have been
granted payment will be with order, or where previously agreed, on delivery. If payment is not made
responsibility at all times to arrange a suitable supply of electricity for use with the Equipment. Under
no circumstances should electrical Equipment be used without it being correctly earthed unless it is when due the Seller shall be entitled to interest on the amount that is overdue at the National
of double insulated specification. The Hirer will be responsible for complying with the requirements Westminster Bank PLC Base Rate plus 4% calculated on a daily basis. This shall be without prejudice
of the Electricity at Work regulations 1989 during the period of the Hirer’s responsibility for the to any other rights or remedies of the Seller.
equipment as defined in Clause 8(ii) of these conditions. (or any statutory modification thereof).
WHEN THE CONTRACT COMES INTO BEING
Hand Finishing Tools 10. MAINTENANCE OF EQUIPMENT, BREAKDOWN PROCEDURES AND ACCIDENT REPORTING
The Hirer will keep himself acquainted with the state and condition of the Equipment and ensure that
it remains safe, serviceable and clean. Any breakdown or any unsatisfactory working of Equipment
The contract shall come into being between the Buyer and Seller when the Buyer has placed an order,
detailing his requirements and agreeing to be bound by these Conditions, and the Seller has accepted
the order.
• Big Blue (also known as 'easy floats' or 'flip-flop floats') must be immediately notified to the supplier. Under no circumstances will the Hirer repair or attempt
to repair the Equipment unless authorized by the supplier. The Equipment must be returned to the WHEN SIGNATURE FOR RECEIPT OF GOODS BECOMES OPERATIVE
for achieving a smooth finish to the concrete surface. Supplier’s premises for examination except where examination elsewhere has been mutually agreed.
If the Equipment is involved in an accident resulting in damage to the Equipment or other property or
Where, for administrative convenience, the Buyer or his agent is requested by the Seller to sign a
Contract and/or delivery note before the Goods are handed over, the Buyer or his agent agrees to
injury to any person, the Hirer will notify the Supplier immediately. examine the Goods at the time of the physical hand-over and such signature in respect of receipt of
• Fresno Broom complete with medium head (other 11. REMOVAL OF EQUIPMENT
the Goods will not become effective until immediately after the physical hand-over.
grades subject to availability) for achieving a brush Equipment must not be removed from any site originally specified by the Hirer or from any RIGHTS RESERVED
subsequently authorized site without the authority of the Supplier.
textured finish. Any failure by the Seller to enforce any or all of these Conditions shall not be Construed as a waiver
of any of the Sellers rights hereunder.
Ride-On
12. CONSEQUENTIAL LOSSES
• Both come complete The supplier shall not be liable for any consequential loss to the Hirer including expenses, liability, loss,
claim or proceeding whatsoever caused by or arising out of the late delivery, unsuitability or lawful
SEPARATE TERM VALIDITY
Should any term in this Contract be held invalid such invalidation shall not affect the validity of the
with 4 snap handles
Powerfloats
repossession of the Equipment or any part thereof or any breakdown or stoppage of the Equipment.
remaining terms. Headings in these Conditions are for reference purposes only and shall not affect
Nothing in this clause shall affect the rights of a person dealing as a consumer as defined by the
the interpretation of these Conditions.
(1.8m long each handle) - Unfair Contract Terms Act 1977 or any statutory modification thereof.
Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England)
Levelling Equipment
Levelling Equipment 2-11
Index
Vibratory Pokers
Vibratory Pokers 12-13
Finishing Equipment
Finishing Equipment 14-19
Concrete Covers
& Roadforms
Concrete Covers & Roadforms 20-22
Finishing Tools
Power Screeds
How does it work? Part No. Description
The striker is a hydraulically driven steel tube pulled BSDU Bunyan Powerpack
across the wet concrete at 230 r.p.m. The tube rotates in (Kubota Diesel engine,
the opposite direction of travel creating a positive grasp control driver and
of friction gathering up to 150mm of concrete build up, T-bar handle)
which tumbles ahead of the spinning tube.
2 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 3
Levelling Equipment
Levelling Equipment
Power Screeds
Standard Bare-end Bunyan Striker Accessories
Tube Tube Tube Hot-end Cold-end
Code Code length BS45606 BS45607 Use our unique
Tub2.0 Tub2.0BE 2.0m ‘Conehead’ system.
Tub2.5 Tub2.5BE 2.5m These removable end units
allow our customers to re-
Tub3.0 Tub3.0BE 3.0m use worn out tube and to
Tub3.5 Tub3.5BE 3.5m purchase straightened ‘bare-
end’ tube only. Quick and
Tub4.0 Tub4.0BE 4.0m easy to change they make SLOPE KITS
Tub4.5 Tub4.5BE 4.5m our Bunyan Striker system
even more versatile.
Tub5.0 Tub5.0BE 5.0m
Tub5.5 Tub5.5BE 5.5m
Tub6.0 Tub6.0BE 6.0m
Tub6.4 Tub6.4BE 6.4m The Slope Kit
Tub7.0 Tub7.0BE 7.0m Manual system - includes double pulley blocks, shackles, securing stakes and
rope gear.
Tub7.5 Tub7.5BE 7.5m
Mechanical system - includes double drum winch and is hydraulically operated.
Tub8.0 Tub8.0BE 8.0m
Tub8.5 Tub8.5BE 8.5m Suggested maximum length of tubes for slope work is 6.4m.
PRECAST KITS
4 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 5
Levelling Equipment
Levelling Equipment
Power Screeds
Standard Bare-end Terramite - Triple
Tube
Code
Tube
Code
Tube
length Roller Screed
Tub2.0 Tub2.0BE 2.0m The ‘Roller screed’™ is designed to fill
Tub2.5 Tub2.5BE 2.5m the gap between vibratory screeds and
Tub3.0 Tub3.0BE 3.0m continuous pavers. It is ideal for large area
Tub3.5 Tub3.5BE 3.5m pours, hand lay and wet-lean applications.
Tub4.0 Tub4.0BE 4.0m Hydrastatic drive eliminates all chains, belts,
clutches, cables and keys. Infinitely variable
Tub4.5 Tub4.5BE 4.5m speed plus an instant forward and reverse - make
Tub5.0 Tub5.0BE 5.0m finishing even low slump concrete mixes an easy
task.
Tub5.5 Tub5.5BE 5.5m
A high speed oscillating front roller quickly spreads
Tub6.0 Tub6.0BE 6.0m • Innovative new idea. and tamps the concrete to a fine tolerance. A
Tub6.4 Tub6.4BE 6.4m powerful drive system means large volumes of
concrete are levelled quickly and easily.
• Up to 6.0m wide bays.
Part No. Description
ROTO Rotoscreed drive
unit and T-bar
• Direct drive from reliable Clean rugged design!
RO45606 Hot-end conehead Honda 4 stroke engine. All service requirements are
simply and quickly carried out.
RO45607 Cold-end conehead
• Engine and gearbox
mounted on the end of Quick-change rollers!
Unique coupling design lets you
the tube. change rollers in minutes.
Cleaning up is fast and easy.
• Lightweight.
Specifications
Carrying and lifting cradle!
• More compact. Electric start.
The Roller Screed™ is easily and safely
Honda engine
lifted to and from the working area by
• Ideal for small pours and means of its unique cradle. Scrapers above the drive
rollers
metal decking. Heavy duty Hydrastatic drive
6 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 7
Levelling Equipment
Levelling Equipment
Eccentric Vibrators
Custom engineered Rotating
Eccentric Shaft (RES)
vibratory system imparts
maximum workforce for
concrete consolidation.
Triangular Frame
Steel or aluminium rods with
vibration- proof welds for
dependability and long life.
8 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 9
Levelling Equipment
Levelling Equipment
Power Screeds
Floater Bars
Part No. Description weight
MVBAR4 4’ (1200mm) Multiscreed bar 6.0kgs
MVBAR5 5’ (1500mm) Multiscreed bar 7.1kgs
MVBAR6 6’ (1800mm) Multiscreed bar 8.2kgs
MVBAR8 8’ (2400mm) Multiscreed bar 10.4kgs
When constructing
Tool Free
wide bay slabs and Quick release connection
mass pours use our
Multivibe
Powerscreeds.
Spot level in the
wet concrete with
a laser level, rake
& then use the
powerscreed to
level and vibrate
the concrete.
Lift handles
On longer floater bars
10 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 11
Vibratory Pokers
AA/AZ Pendulum pokers
• Performance on all jobs with a choice of drive units with flexible drive shaft.
• High performance with maximum speed in the pokers head (12000rpm)
• AA pokers: top of the range poker series, suitable for demanding applications
• AA27 (25mm) AA37 (37mm), AA47 (49mm), AA67 (63mm) & AA77 (75mm)
Rigid Shaft – all with 6.0m shaft length.
• AZ pokers: economical alternative.
Vibratory Pokers
Vibratory Pokers
Shaft HUM4/1 Hummer power unit c/w Honda engine 1.2m flex & 1" head • AT29 (29mm), AT39 (39mm), AT49 (49mm) & AT59 (59mm)
HUM4/2 Hummer power unit c/w Honda engine 1.2m flex & 2" head • Superflex 1.0, superflex, 2.0, superflex 3.0
1.8m & 2.4m flex also available • AH15S – electric drive unit.
HUM/MVRS28 Hummer power unit c/w Honda engine rigid shaft & 2" head
Flexible shafts and heads can be purchased separately
AY Pneumatic Pokers Smart Electronic High
• Cover all diameters from 26mm to 155mm Frequency Pokers
Vibrator Heads – • Large choice of diameters for extensive applications from • High level performance and
steel or rubber coated test cubes to dam vibration reliability
With the growing use of epoxy coated Re-Bar OZTEC • Based on the lamella principle • Streamlined electronic
INDUSTRIES developed the new patented ‘Rubber Head’. convertor box
Steel heads act like an electric hammer striking objects over • Features the new ball-stop handle to avoid air leakage
10,000 times a minute. Rubber Heads are covered in a and possible power loss • Outstanding performance
tough, long wearing Elastomer that is softer than the epoxy • Equipped with highly resistant • Safe operation: thermal
coating and prevents damage. pre-treated tube and protection, switch
standard 2.0m hose protected against
Part No. Steel Part No. Rubber (AY87-AY157 – 1.5m) hazardous start ups.
H100OZ 25mm (1”) Diameter HR275OZ 47mm (17/8”) • Lubricator available as an • 115v – motor in head with
option. ‘soft start’.
H150OZ 37mm (11/2”) Diameter
H200OZ 50mm (2”) Diameter • AY27 (26mm), AY37 (36mm), • Smart 40 (40mm), Smart 48
AY47 (47mm), AY57 (56mm), (48mm) & Smart 56 (56mm)
H250OZ 63mm (21/2”) Diameter AY67 (67mm), AY77 (77mm),
AY87 (87mm), AY107 (107mm)
• Cable length – 15m & hose
length – 5.0m.
& AY157 (157mm)
12 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 13
Power Floats
Features
‘Simple, available • Spider Plate Assembly
Long wearing cast
iron, precision machined for
and cost effective’™ total balance. Ability to
maintain an extremely close
tolerance between trowel
arm and bore
Bartell Power trowels have been the choice of the construction industry
• Trowel arm adjustment
throughout the world for the past 40 years. SPEEDCRETE bring you the Adjustments for bolts near
latest range of products from the worlds premier power trowel manufacturer! the end of the trowel arms
Developed in partnership with
24” Edger for job site re-alignment
contractors, we offer power trowels • Hoist Hook/Transporter
Specifications designed, engineered and built for the Available for ease of
Bartell Power trowels are available competitive edge. movement on job site with
in a variety of models and sizes. quick attachment to any
They are ideal for a range of finishing model
requirements from driveways to high
tolerance industrial floors. Designed
• Replacement Blades
for all Bartell Models
and built to machine tool tolerances Premium quality, abrasion
for improved performance. The range resistant spring steel
offered to you here includes a 24” finishing and combination
edging float, which is ideal for 36” or 46” Pedestrian blades.
small area pours, but is specifically
Finishing Equipment
Finishing Equipment
designed to run alongside walls etc. • Guaranteed Gearbox
The free-wheeling cast ring allows Two year warranty on most models. Extra heavy
the operator to float right up to Walk behind power trowels – pedestrians! duty, precision machined high tensile shafting,
the wall.
Bartell power trowels are available in a variety of models and
precision cone and ball bearings, heavy duty
bronze and steel worm gears combined with
Pans
sizes and come with a choice of engine if required. Our standard special heat-treated aluminium gear box,
machines are 24” edging float, 36” and 46” power trowels all ensures trouble free performance. Features a
with the ever popular and reliable Honda engines. sight glass for oil level check.
14 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 15
Power Floats
Pro Series Pro 900 Riders:
Allen Engineering’s Pro Series Riders have the power, the performance • 900-4-NOL-SFC-20HO
and the features that concrete professionals want for today’s larger pours.
Razorback Riders are designed to help concrete finishers produce high
• 900-4-NOL-SFC-24HO
tolerance concrete floors. • 900-4-NOL-SFC-27KO
The operator control panel on all models gives concrete finishers the • 900-4-NOL-SFC-24HO Edger
operating status of their Allen Rider without distracting them from the
concrete. • 900-4-NOL-SFC-27KO Edger
Finishing Equipment
1200-5-NOL-SHD-34VGG Guard Rings
• 1200-5-NOL-SHD-34VGTD These protective heavy- duty steel guards are
• 1200C-5-NOL-SHD-34VGG-PSlll detachable and replaceable.
• 1200C-5-NOL-SHD-34VDTD-PSlll
More Power To You!
Super Pro Riders: with SHD Gear Boxes With different engine makes in a wide range of
Allen Razorback® Pedestrians are designed to
horsepowers, there is a Pro Series Razorback Rider to
help concrete professionals produce
high tolerance concrete floors with high-
• 400C-5-1200-SHD-44KBTD-PSlll meet your needs.
quality features that are hard to find on other trowels.
All Razorback® Pedestrians feature precision engineered Allen® Super Pro Riders:
Gearboxes for long, trouble- free life. We use cast iron spiders,
Two Year Warranty on Gearboxes
pressure plates and lift levers for long wear and continuous with XHD Gear Boxes We manufacture our gearboxes to exact specifications.
service. We precision machine our trowel arms and spiders to such Our Standard Fan Cooled (SFC) and Super Heavy Duty
close tolerances that our trowels don’t need bushings. And, our high
• 500B-5-1500-XHD-56KBTD-PSlll
(SHD) gearboxes are backed by a
strength steel handle provides maximum comfort and control. complete two year warranty.
Razorback® Pedestrians feature a safety guard ring that is designed to meet the Hydra Drive Riders:
toughest operator safety standards in the world.
Our commitment to product quality, attention to detail and 100% product
• HD530A-5-1200-HYD- Patented Dolly Jack Wheels
44KBTD-PSlll
testing ensures that your Razorback® Pedestrian will provide years of These optional transport wheels are a real
high performance and trouble- free operation on the job. • HD550-5-1500-HYD- “back saver” when moving riders around
87KBTD-PSlll a job site or shop. Dolly Jacks are also a
great help when changing pans or
blades.
High
Performance
Riders:
with SHD
Gear Boxes
• 100C-5-
1200-SHD- Replacement
54KO
Allen Razorback®
Pedestrians will be available blades
later in 2006 to the UK
market. Please ask about
the full model range.
16 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 17
Spreaders Sprayers
‘Speedspray’ Pump Unit
Spreader wagon TV830 ‘Speedspray’ Concrete Curing Sprayers • Can be lifted onto the back of a pick up
with the drums.
• Comes with a 30m hose as standard.
• Holds up to 50kg.
‘Speedspray’ Classic
of topping material
• Four wheeled version that requires the drum to be
• Dust guards lifted onto it.
Finishing Equipment
the concrete surface. Length 920mm Classic
Pump Unit (Except Pump Unit which is 30m)
Width (including handle) 960mm
Spray Lance: 10mm x 3m;
Height (including handle) 810mm Razorback Power Sprayers Spray Jet: 10mm brass hollow cone jet.
Weight (empty) 36kg
• For spraying form release
agents, water-based
concrete sealants and
Economy Spreader curing compounds.
• Continuous recirculating
system ensures material is
always well-mixed and
ready to spray.
• Each pump unit can be
mounted onto either a
tow-cart or push-cart.
Razorback® Material Spreader Heavy duty
The Razorback® Material Spreader accurately applies materials spreader machine taking up to 100Kg of
to meet the most demanding industrial floor specifications. topping material. Discharge between 1 KG Hand Sprayers
This mechanical spreader eliminates the problems of over and and 5 Kg per square metre. • Viton Seals
under application caused by hand casting.
Extra wide wheels which can forward and
The spreader hopper is hydraulic driven with independent reverse independent of each other to assist • Heavy Duty Polyethylene or
control of material flow rate and hopper travel speed. The manoeuvre the spreader in confined spaces Stainless Steel Tanks
Razorback® Material Spreader provides for exacting material and for ease of turning.
application rates from 2.5kgs/m2 to 12kgs/m2. • 3 Gallon Capacity
The major benefits of using the spreader are :
• Heavy Duty Carrying Strap
• No wastage of topping materials as accurate Razorback technical data.
quantity per square metre is applied. • Wide Mouth Funnel Top for
easy filling Capacity: One 205 Litre Drum
• Accuracy of topping placement—material will
Engine: 9910 5.5HP Honda,
be applied in an even thickness to the entire • Deluxe Chemical Resistant
floor area. 7560XL 4HP Honda
Hose
Pump: 9910 Diaphragm,
• Health environment for the applicators
– as the material is discharged directly at • Easily Field Repairable 7560XL Rollerball
floor level there is very little dust raised Delivery Hose: 15.25m
in to the atmosphere.
Model 803 Model 603 Compounds with: 9910 - up to 35% solids
7560XL - up to 30% solids
• Stainless Steel Tank • Professional Design
Professional • Brass Valve & Wand • Brass Valve & Wand
Spreader • Brass Spray Tip • Heavy Duty Design
18 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 19
Lightweight
Roadforms
Versatile
Re-useable
Heavy Duty Roadforms
• Manufactured to order. Flatwork - Straight Foundations - Straight Raft Slabs - Any Shape
• For deep slabs.
or Curved
• Contact us with your or Curved
• For use on runways, taxiways etc. requirements.
Use your
imagination!
Square Edge Roadforms Flexible Roadforms
A simple form of shuttering used Specially developed for radius work.
for concrete slabs or floors.
3.0 metres long by 51mm wide. Code Depth. (mm)
R/FORM-100-FL 100
Code Depth. (mm)
R/FORM-150-FL 150
R/FORM-100-S 100
R/FORM-200-FL 200 Clamps to
R/FORM-150-S 150
secure road pins-
R/FORM-200-S 200
approximately
500mm to
750mm centres
Roadform Stakes
Available for use with both square
edge and flexible roadforms.
Code Height Width Length Mitre
Code Length. (mm)
SFPE100 100mm 35mm 5.0m and bend
R16/600 16 x 600
Concrete Covers
Concrete Covers
& Roadforms
& Roadforms
R16/900 16 x 900
SFPE200 200mm 35mm 5.0m internal
R20/600 20 x 600 corner
SFPE250 250mm 35mm 5.0m
R20/900 20 x 900
SFPE300 300mm 35mm 5.0m
20 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 21
Concrete Covers Concrete
Speedcrete are pleased to offer our unique ‘Speedtent’
which is available in a variety of sizes to suit most bay widths
up to 9.0m.
The wedge shaped, ‘low-slung’ design assists in the tents ability to withstand
Finishing
winds of reasonable intensity.
Simplistic in concept the ‘Speedtent’ can be transported by a regular size pick
up truck.
Tools
A series of tents can be utilised to cover longer bays by using a combination FOR THE
of standard and over-lap units.
Manufactured to order. Leg height can be specified.
Overlap detail CONSTRUCTION
INDUSTRY
This catalogue shows our
range of standard finishing
tools. If you cannot see just
the tool you are looking for
then please contact us. We
should be able to source it for
you from one of our many UK
or international suppliers -
... if they don’t have it
we can probably make it.
EASILY MOVED
Concrete Covers
& Roadforms
Nominal To cover
Tarpaulin size: Bay size (approx):
Width Length Width Length
4.5m 6.0m 3.5m 5.0m
5.5m 7.0m 4.5m 6.0m
6.0m 4.5m 5.0m 3.5m
7.0m 5.5m 6.0m 4.5m
9.0m 7.0m 8.0m 6.0m
10.0m 4.0m 9.0m 3.0m
22 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 23
Big Blue Magnesium Bull Floats
A blue carbon steel float to provide a super These lightweight and long wearing magnesium floats are made
smooth finish. from the finest extruded magnesium. Multi-ribbed top provides
When used in combination with the
Complete with extra strength. Magnesium
heavy duty The blades are properly curved and balanced to prevent digging. Bull Float with
BUNYAN STRIKER TUBE, the requirement to
powerfloat is often unnecessary eg house
knucklehead
bases, sewerage treatment projects, etc. Knucklehead
Part Number Size Weight
Supplied with knucklehead gearbox for float Comes complete with heavy duty
pitch variation. 704417 600mm x 300mm (2ft x 1ft) 2.7kgs knucklehead gearbox.
704418 900mm x 300mm (3ft x 1ft) 5.0kgs
Other sizes available to order. 704419 1200mm x 300mm (4ft x 1ft) 5.9kgs
Can be supplied with handles on each end for use in
precast factories.
704420 1500mm x 300mm (5ft x 1ft) 7.8kgs Magnesium Bull
704421 1800mm x 300mm (6ft x 1ft) 9.5kgs
704422 2400mm x 300mm (8ft x 1ft) 11.4kgs
Float Blade only
Part No. Size
700610 900mm x 200mm (3ft x 8”) Part No. Size
Spares 700613 1200mm x 200mm (4ft x 8”) 700636 900mm x 200mm (3ft x 8”)
700615 1500mm x 200mm (5ft x 8”) 700639 1200mm x 200mm (4ft x 8”)
Part Number Size Description 700641 1500mm x 200mm (5ft x 8”)
704411 600mm (2ft) x 1ft Blade only
704412 900mm (3ft) x 1ft Blade only
704413 1200mm (4ft) x 1ft Blade only
704414 1500mm (5ft) x 1ft Blade only Groover
704415
704416
1800mm (6ft) x 1ft
2400mm (8ft) x 1ft
Blade only
Blade only 4 Bolt Bits for
Bull Float Bull Floats
By using our bronze groover bit
Float Adaptor Bracket Brackets ‘dummy’ joints can be formed whilst
floating the surface.
The broom/float adaptor bar can be used with a See Page 30 See Page 34
combination of tools such as the Magnesium
Bullfloats Big Blue Floats (see above) or Channel
for Broomheads Part No. Bit Depth Width
Radius Floats. Easily adjustable broom angle. 704359 19mm (3/4”) 3mm (1/8”)
704360 25mm (1”) 3mm (1/8”)
Part Number Description
704361 38mm (11/2”) 3mm (1/8”)
380211 Broom/Float Adaptor Bar
Other sizes are available.
The Knucklehead
The isometric
design holds
Fresno
blade at Use our Float adaptor
Aluminium the kit to convert your
desired Magnesium Bull Float
Snap Handle Heavy Duty Lightweight Eliminator
angle for to a high quality Fresno
(see page 30 for parts).
easier floating. Uses
Finishing Tools
Finishing Tools
These handles fit almost all 45mm Handles. 4 Bolt Adaptor Plate
finishing tools. Larger diameter required 704379
generally used with Bull Floats and Part Number Description Weight
smaller diameter handles with
704383 Heavy duty Knucklehead
Walking Edgers, Grooving tools etc.
cast aluminium 2.30kgs
Part Number Length Diameter Weight LWTK’HEAD Lightweight Knucklehead
(composite)
700344 1800mm (6ft) 35mm (13/8”) 0.8kgs 705050 Eliminator Knucklehead
700524 1800mm (6ft) 45mm (1 /4”)
3
0.9kgs (economy)
704369 Replacement Spring Button
24 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 25
Magnesium Channel Floats High Tolerance Flooring Tools
The Bigger the Float the Flatter the Floor
This Channel Float combines strength and lightness that allows you to float a larger area more economically Saw beams
than other floats. Great for use on high tolerance floors. Our saw-beam handles can be attached to
either our magnesium tamp beam or ‘Hi-
tech’ magnesium screed beam for
increased surface flatness and tolerance.
NEW Used in conjunction with a ‘bump cutter’ it
Use in conjunction with
DUAL EDGE PROFILE
can produce super flat floor specifications.
Ergonomic handle design and slotted
Magnesium Tamp Beams
(Page 29).
Magnesium connection provides for wear adjustment
and includes rubber grips. Part number Description
Channel 700174 Saw Beam Handle set
Radius
Float with Knucklehead Rounded
Front Edge
Squared 90°
Back Edge Traditional Bump Cutter
Supplied with Part No. Length Width A tool for smoothing and flattening the surface of plastic concrete.
heavy duty 700571 1200mm (4ft) 150mm (6”)
Typically used for attaining super flat and high tolerance floors as
END VIEW well as removing high spots from other concrete types including
knucklehead 700572 1500mm (5ft) 150mm (6”) Pavement Quality.
gearbox 700573 1800mm (6ft) 150mm (6”) Part No. Description Size
• Round ends to
reduce lapmarks 700575 2400mm (8ft) 150mm (6”)
• Rounded front 700577 3000mm (10ft) 150mm (6”) Blade only 400150 Complete unit including heavy-duty knucklehead
and stainless steel outriggers & 3 snap handles.
3000mm long – 125mm x 50mm
(10’ long – 5” x 2”)
edge for floating Round ends to reduce lapmarks. 400155 Complete unit including heavy-duty knucklehead 3650mm long – 125mm x 50mm
• Square 90° back edge for cutting Part No. Length Width
and stainless steel outriggers & 3 snap handles. (12’ long – 5” x 2”)
Finishing Tools
400165 Complete unit including
This double channel float gives an even lightweight knucklehead 3650mm long – 118mm x 60mm
Part No. Width and outriggers & 3 snap handles. (12’ long - 45/8 ” x 21/2““)
and consistent float surface. It features
automatic adjustment of the float level 700600 1200mm (4ft)
no matter which way it is pulled.
700601 1800mm (6ft) Part No. Description Size
Especially useful on P.Q. (pavement Profile
700602 2400mm (8ft) 400159 Lightweight beam, brackets and outriggers. 3000mm long – 118mm x 60mm
quality) work and low slump concrete.
Replacement (10’ long – 45/8” x 21/2“)
Use on wide bays where access for
traditional handles is limited. Parts 400164 Lightweight beam, brackets and outriggers. 3650mm long – 118mm x 60mm
(12’ long - 45/8 ” x 21/2““)
26 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 27
Straight Edge & Testing Equipment Concrete Tamping
Magnesium tamp beams Concrete
Lightweight with less ‘sag’ than traditional beams. Tamper -
‘Jitterbug’
Rectangular Box Section 125mm x 50mm (5” x 2”)
Heavy steel bottom to
prevent concrete splashing
Part No. Length Length Weight on legs during use. Welded
(mm) (nominal) (feet) (kg) (approx) at all contact points,
700167 3050 10 5.75 rubber grips on
handles.
700168 3600 12 7.00
700169 4570 15 8.76
Part No. Width Weight
700170B 5500 18 10.55
704517 900mm (3ft) 5.9kgs
Surface 700170
700171
6100
7300
20
24
11.70
14.00
deformation
measurement.
A straight edge, approximately 3.0 metres in
Two versions are available:
length used to determine lateral surface 1. A plain lightweight straight edge which can be Hi-tech Lightweight Magnesium
regularity of a road or floor surface etc. placed on any surface to give a visual indication of Screed beam.
level.
Unique extruded shape provides excellent strength and
2. A lightweight straight edge equally supported at each rigidity. Contoured shape facilitates hand screeding as it
end with an aluminium wedge which gives easy to grip. Excellent where flatness tolerances are
a set height between the concrete surface and critical.
the straight edge. Part No. Length Length Weight
‘Hour-glass’ profile (mm) (nominal) (feet) (kg) (approx)
Using the straight edge with wedge blocks you can measure any 115mm x 44mm (4 /2” x 1 /4“)
1 3
vertical irregularity using an optional 2.5mm incremented wedge with HMS10 3050 10 4.5
a range of 12.5mm low to 12.5mm high.
HMS12 3600 12 5.5
• 3.0m lightweight aluminium straight edge with carrying loops. HMS15 4570 15 6.8
• Available with or without 12.5mm wedge blocks. HMS18 5500 18 8.2
• Optional metric graduated measuring wedges HMS20 6100 20 9.1
marked every 2.5mm available.
• Measuring range 12.5mm low to 12.5mm high
Aluminium
- fixed height Aussie Combo
This innovative new tool can be used as a
float, screed, or checking tool when you
Tamp Beam Handles want just the right finish. Base of tool comes
Available to suit with a round edge for floating and a square
edge for cutting and filling. Lightweight
either beam section
magnesium handles adjust for comfort.
(please specify).
Complete with rubber grips. Code Size Handles
CC421 1200mm x 35mm x 50mm 1
Part No. Handle type CC422 1800mm x 35mm x 50mm 1
700175 Aluminium – fixed height CC423 3000mm x 35mm x 50mm 2
Finishing Tools
Finishing Tools
700176 Adjustable height
28 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 29
Fresno Brush/Indent Finishes
Fresno Broom Hand Brooms Part No. Width Description
DECK 300mm (1ft) Fixed Wooden Handle
A Zinc plated steel float incorporating float
adaptor and a texturing broom.The brooms are 330001 600mm (2ft) Fixed Wooden Handle
Part Number Length Float Width Broom Texture
manufactured in polybristle, available in Hard, Steel Finishing Brooms 330002 900mm (3ft) Fixed Wooden Handle
380100 900mm (3ft) 125mm (41/4”) Soft
Medium or Soft textures.The brooms may also 330003 1200mm (4ft) Fixed Wooden Handle
380101 900mm (3ft) 125mm (41/4”) Medium Primarily used for concrete texturing on motorways, airport
be supplied with steel filament brush (to BS aprons and taxiways. 330004 600mm (2ft) Adjustable Wooden Handle
specifications) in widths of 900mm (3ft) and 380102 900mm (3ft) 125mm (41/4”) Hard
1200mm (4ft) only. Floats have radius ends to 380103 900mm (3ft) 125mm (41/4”) Wirebroom Available with a 1500mm wooden handle with support brace. 330005 900mm (3ft) Adjustable Wooden Handle
prevent lap marks and come complete with a 380104 1200mm (4ft) 125mm (4 /4”)
1
Soft Alternative they can be supplied with an adjustable wooden 330006 1200mm (4ft) Adjustable Wooden Handle
heavy duty KNUCKLEHEAD gearbox. handle or snap handle adaptor. 330007 600mm (2ft) Broomhead only
380105 1200mm (4ft) 125mm (4 /4”)
1
Medium
380106 1200mm (4ft) 125mm (4 /4”)
1
Hard 330008 900mm (3ft) Broomhead only
380107 1200mm (4ft) 125mm (41/4”) Wirebroom 330009 1200mm (4ft) Broomhead only
380108 1500mm (5ft) 125mm (41/4”) Soft 330011 Fixed Wooden Handle only
380109 1500mm (5ft) 125mm (41/4”) Medium 330012 Steel Bracket c/w bolts only
Spares 380110 1500mm (5ft) 125mm (4 / ”)
1
4 Hard
701077 Adjustable Wood Handle only
Fixed wooden handle 704453 Snap Handle Adaptor 45mm
Adjustable
Handle
Snap handle
adaptor
Part Number
380200
Broom Strip only Length
Soft 900mm (3ft)
The ‘Chameleon’
Handleless concrete finishing system (rope brush). It is
380201 Med 900mm (3ft) pulled from side to side with ropes thus eliminating
380202 Hard 900mm (3ft) excessive handle weight, and giving a uniform textured
Finishing Tools
Finishing Tools
Wirebroom finish. Restrictions caused by using handles are
330008 Wirebroom Head 900mm (3ft)
eliminated and awkward areas are finished easily. The
380204 Soft 1200mm (4ft) Chameleon offers different textures with colour coded
Polybristle Strip 380205 Med 1200mm (4ft) brush refills in 1200mm, 1800mm & 2400mm versions.
380206 Hard 1200mm (4ft) Available as individual parts or as a Trac 2 kit.
330009 Wirebroom Head 1200mm (4ft) The Trac 2 kit is available in 1200mm, 1800mm &
380208 Soft 1500mm (5ft) 2400mm and includes 2 strips each of soft (black),
380209 Med 1500mm (5ft) medium (orange) and hard (green) all in a carry case.
Aluminium Extrusion
380210 Hard 1500mm (5ft) Please ask for further details.
30 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 31
Specialist Finishing Bull Floats
Mahogany Wood Bull Float Serrated Bullfloat Part No. Size Description
This selected wood grain 200mm wide bull float is available in This all cast float is available with a 9mm on centre groove spacing only. 390112 1050mm x 200mm Shallow penetration
two styles and two sizes. To suit knucklehead or handle bracket. 390116 1050mm x 200mm Deep penetration
Grooves 75mm long from leading edge of float, c/w heavy duty
Part No. Description knucklehead. Add "A" to part number for blade only.
704722 900mm wood float c/w knucklehead
704723 900mm wood float - blade only
WHERE A BRUSH FINISH
704724 1200mm wood float c/w knucklehead IS NOT ENOUGH
704725 1200mm wood float - blade only Plexiglas Bull Floats
Used for floating concretes that have high adhesive factor.
(Nothing sticks to it - like a
Politician.) Ideal for the finishing
of Air Entrained concrete and
micro silica. Complete with Stainless or Cast
lightweight knucklehead or
float only. Radiused Rumble Float
Part No. Description Designed to form harsh rumble ‘wake-up’ strips in paving or
median strips. Radius wave design shown here has 110mm (4.5”)
790399 900mm x 250mm c/w knucklehead with a 25mm (1”) depth. These floats can be filled with rock or
Bridge Deck 790400 1200mm x 250mm c/w knucklehead sand for added weight. Other sizes of wave design are available
to order. Boat Ramp
Texture Strips Float Add "A" to part number for blade only.
Finishing Tools
CC788 3’ x 8” (900mm x 200mm) 1
/2“ (12mm)
CC790 4’ x 8” (1200mm x 200mm) 3
/4“ (19mm)
CC791 3’ x 8” (900mm x 200mm) 3
/4“ (19mm)
CC796 4’ x 8” (1200mm x 200mm) 1” (25mm)
Boat ramp groover
CC797 3’ x 8” (900mm x 200mm) 1” (25mm)
CC793 4’ x 8” (1200mm x 200mm) 21/4“ (58mm)
Part No. Size
CC794 3’ x 8” (900mm x 200mm) 21/4“ (58mm)
390124 1200mm x 175mm ( 4ft x 7”)
Blade only add "-01" to part number
32 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 33
Accessories & Concreting Tools
The Knucklehead Light-duty Lightweight
The isometric Concrete Rakes Texas Placer
design holds New lightweight, all aluminium.
Available with
blade at the
lightweight Part No. Description
desired angle for Part No. Description
magnesium or steel
easier floating. CC010 Steel 57cm x 13cm
head. Straight 'broom'
Uses 700191A Lightweight aluminium placer
Aluminium Heavy Duty Lightweight Eliminator
45mm
Handles.
handle. CC113 Magnesium 50cm x 10cm
Finishing Tools
Part Width/ Part Width/ handle adaptor.
370250 900mm (3ft) Part No. Description
No. Description No. Description
370251 1200mm (4ft) Part No. Size 700569 Aluminium Rake
370116 350mm (14") 370117 350mm (14”) blade only
370256 1800mm (6ft) 704215 Handle only
370115 450mm (18”) 370118 450mm (18”) blade only RG 24 600mm Double roller tamp
370258 2400mm (8ft) 701108 Blade only
370114 560mm (22”) 370119 550mm (22”) blade only RG 36 900mm Double roller tamp
370120 900mm (36") 370125 900mm (36") blade only RG 24 S 600mm Single roller tamp
370121 1200mm (48") 370126 1200mm (48") blade only RG 36 S 900mm Single roller tamp CONTOURED WOODEN
370127 Replacement wooden handle HANDLE INCLUDED
34 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 35
Hand Trowels & Groovers
Trowels Pool Trowel Magnesium Hand
Trowel with Part No. Size
This trowel is for the
ProForm ®
Blue Steel professional and made
from Blue Steel. Pool Handle
706173
706174
500mm x 75mm (20” x 31/2”)
450mm x 75mm (18” x 31/2”)
Trowels trowels are fully
rounded, and flexible A lightweight and 706175 400mm x 75mm (16” x 31/2”)
to allow contour durable trowel
Fine quality blue steel blade. Blue Part No. Size manufactured Add "R" to part number for round ends
finishing.
steel offers a little more flexibility in magnesium.
370500 500mm x 125mm (20” x 5”)
which some finishers prefer.
370501 450mm x 125mm (18” x 5”)
370502 400mm x 125mm (16” x 5”)
370503 350mm x 100mm (14” x 4”) Pipe Trowel
Cement Trowel 370504 300mm x 100mm (12” x 4”)
Trowel to facilitate finishing
Manufactured in Blue Steel, with 370505 250mm x 100mm (10" x 4") around up-stands etc.
a choice of trowel shape. These
trowels are ‘broken-in’ by factory Manufactured in Blue or
skimming of the underside of the blade. Carbon Steel.
• Square/round front
• Square ends
• Round ends Floats Part No.
360001
Size
300mm (12”)
Size Square/Round Front Square/Square Round/Round PL501PF 300mm (12”)
500mm x 125mm 370611 370670 370680
450mm x 125mm 370612 370622 370681
400mm x 125mm 370617 370671 370682
400mm x 100mm 370613 370623 370683
350mm x 100mm 370614 370624 370684
Cali Mahogany wood float
300mm x 100mm 370615 370625 370684A
Redwood Float
250mm x 100mm 370616 370626 ––
Part No. Description Size
HC160 Mahogany 12” x 3” (300mm x 75mm) 12mm thick Part No. Description Size
HC161 Mahogany 14” x 3” (350mm x 75mm) 12mm thick CF251 Redwood float 12” x 4” (300mm x 100mm)
Cement Finishing Trowel HC162 Mahogany 16” x 3” (400mm x 75mm) 12mm thick CF252 Redwood float 15” x 4” (380mm x 100mm)
with ProForm® Handle HC163 Mahogany 18” x 3” (450mm x 75mm) 12mm thick
• Precision balanced!
• Broken-in and ready to use!
Each blade is cross-ground, with high strength aluminium mounting.
Groovers Bronze Walking Groovers
ProForm® handle is specially textured for that ‘Great Grip’. Carbon Bronze Hand Groovers
Steel Trowel.
Hand &
Size
Square/Round
Front
Square/
Square
Round/
Round
Walking Part No. Length Width Bit Depth
700810 200mm (8”) 100mm (4 /2”)
1
25mm (1”)
500mm x 125mm (20” x 5”) CF288PF CF232PF CF205PF Groovers
Finishing Tools
Finishing Tools
700811 200mm (8”) 100mm (4 /2”)
1
37mm (11/2”)
500mm x 100mm (20” x 4”) CF287PF CF231PF - Tools manufactured in
450mm x 125mm (18” x 5”) CF185PF CF546PF - Bronze. Part No. Length Width Bit Depth
450mm x 100mm (18” x 4”) CF286PF CF227PF - Walking tools require 700812 200mm (8”) 112mm (4 /2”)
1
25mm (1”)
400mm x 100mm (16” x 4”) CF285PF CF222PF - 1500mm wooden
700813 200mm (8”) 112mm (41/2”) 37mm (11/2”)
350mm x 100mm (14” x 4”) CF284PF CF217PF - handle. Order
separately - 701077 or
300mm x 100mm (12” x 4”) CF124PF CF212PF - Other sizes available
snap adaptor
250mm x 100mm (10” x 4”) CF104PF CF202PF - (see page 34).
36 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 37
Edgers Knee Protection
A range of knee pads to suit both
the cement finisher and plasterer.
Professional, all Leather
Hand & Walking Edgers Bronze Hand May be used after work by the
Edgers • Top grain, natural skateboarder.
(Arris Trowels) •
russet leather.
Comfortable thick felt lining.
Tools manufactured in bronze or blue steel.
• Wide 25mm leather strap.
• Rivet reinforced. With Plastic Cup
Part No. Length Width Radius Part No
Made of cordura
700593 225mm (9”) 100mm (4”) 6mm (1/4”) 704302 nylon with plastic
knee cup.
Strong and
light.
Blue Steel Hand Edgers Bronze
Moulded Rubber Part No
Part No. Length Width Radius Walking
Eliminate sore knees and make 704334
Edgers work easier. Excellent for cement
704565 150mm (6”) 25mm (1”) 6mm (1/4”)
workers, roofers, painters and many
704565A 150mm (6”) 25mm (1”) 12mm (1/2”) other uses. Top quality.
704566 150mm (6”) 37mm (11/2”) 6mm (1/4”) E-Z Kneeler
Part No
704567 150mm (6”) 50mm (2”) 12mm (1/2”) Provides the knees comfortable support and
704568 150mm (6”) 62mm (21/2”) 6mm (1/4”) Part No. Length Width Radius 700407 Knee Pads protection.
704569 150mm (6”) 75mm (3”) 6mm (1/4”) 700408 Straps only Keep them safe or they might go missing!
700800 225mm (9”) 100mm (4”) 6mm (1/4”)
704571 150mm (6”) 75mm (3”) 12mm (1/2”) 701077 1500mm wooden handle Part No Size Width
704572 150mm (6”) 100mm (4”) 6mm (1/4”) 704453 45mm snap adaptor WL069 14” x 24” (250mm x 600mm) 2” (50mm)
704574 150mm (6”) 100mm (4”) 12mm (1/2”) Knee Boards
704576 150mm (6”) 100mm (4”) 19mm (3/4”) Blue Steel Walking Edgers Lightweight, tough
704578 225mm (9”) 100mm (4”) 6mm (1/4”) heavy duty
Part No. Length Width Radius polystyrene
704580 225mm (9”) 100mm (4”) 12mm (1/2”) plastic or
704594 225mm (9”) 100mm (4”) 6mm (1/4”) Deluxe 16
704582 225mm (9”) 150mm (6”) 6mm (1/4”)
704596 225mm (9”) 100mm (4”) 12mm (1/2”) gauge
704584 225mm (9”) 150mm (6”) 12mm (1/2”) stainless
701077 1500mm wooden handle steel. Knee pads
704453 45mm snap adaptor are replaceable.
Code Description
370100 Stainless steel 750mm x 200mm
Concrete Name Stamp
CC153 Plastic 750mm x 250mm
The perfect way to mark concrete for
WL080 Replacement knee pads permanent identification. Made from high
grade bronze. Stamp is 125mm x 230mm oval
Gauging & Margin with flat ends. 16 spaces on three lines.
Form-Saver Replacement year stamp is 15mm high) Stamp
(Step-Saver) Trowels can be furnished without date on request.
Special order only.
Edgers
These vertical edgers Code Description
will make finishing step Fluted rub brick
and form corners a breeze. CF400 Stamp with '2006' insert
Fluted silicon carbide rub brick with
Just insert this tool between handle, for fast and easy CF401-06 '2006' date insert only
Code Blade size
Finishing Tools
Finishing Tools
forms at the corners When the smoothing and dressing down
forms are stripped you’ll have a CF401-07 '2007' date insert only
Margin trowels
perfect rounded corner. Round rub brick
GG431 125mm x 40mm
GG432 125mm x 50mm Lightweight round Code Size Grit
rub brick with
Part No. Description Size x Radius GG434 150mm x 50mm handle is 25mm CF270 150mm round 20
CF001 Corner form tool 10” long x 3/8” (250mm x 10mm) GG433 200mm x 50mm thick and 150mm CF268 200mm x 90mm x 35mm 20
diameter.
CF002 Corner form tool 10” long x /2”1
(250mm x 13mm) Gauging trowels CF283 150mm x 75mm x 25mm 20
CF003 Corner form tool 10” long x /8”5
(250mm x 18mm) GG443 180mm x 80mm CF282 150mm x 75mm x 25mm 60
38 Salisbury (Southern UK & Export) Kings Lynn (Midlands & East Anglia) Glasgow (Scotland & Northern England) 39
Bricklaying Tools - Coming soon!