Reagent Chemicals American Chemical Society Specifications Ninth Edition
• Updated for January 2000 with official ACS CONTENTS
Committee on Analytical Reagents specifications. DEFINITIONS, PROCEDURES, STANDARDS, • New section on standard grade reference materials AND containing over 400 standards with their require- SPECIFICATIONS ments and tests. 1. Introduction and Definitions: Reagents for • Specifies reagents suitable for use in ultra-trace Special Purposes, Containers, Interpretation of analysis. Requirements, Precautions for Tests • Includes new analytical techniques of mass, 2. General Directions and Procedures: Gravimetric infrared and plasma emission spectroscopy. Method for Determining Small Amounts of • Extensive Tables. Impurities, Measurement of Physical Properties, The latest edition of this indispensable reference continues in the Colorimetry and Turbidimetry, Trace and traditions of the previous volumes, providing detailed specifica- Ultratrace Elemental Analysis, Direct tions and analytical procedures for approximately 450 laboratory Electrometric Methods, Titrimetry: Electrometric reagents, while updating some of the more complicated classical procedures for trace analysis and adding instrumental methods End-Point Detection, Chromatography, where possible. Recommended Chromatography Procedures, New to Reagent Chemicals, 9th hditiotr.The addition of otan- Infrared Spectroscopy dard-grade reference materials at the request of the EPA and The Chemical Reference Materials Manufacturers Association, featuring 3. Reagent Solutions: Preparation: Reagent Water, 400 specified standards in a section separate from the traditional Water, Reagent Solutions, Solid Reagent reagent chemicals. Mixtures, Control and Standard Solutions, Other important additions include reagents for use in ultra trace Reagent Chemicals analysis, such as sub-boiled acids packaged in Teflon containers, and new analytical techniques such as plasma emission spec- 4. Volumetric Solutions: Preparation and troscopy and "clean room" analytical procedures that are required Standardization in the use of these reagents. This rigorous volume, with its many 5. Registered Trademarks specifications, up-to-date procedures, and constant improvement through years of research, is an essential tool in assuring the 6. References required quality of your reagent chemicals and another step SPECIFICATIONS FOR REAGENT CHEMICALS towards the worldwide unification of reagent chemicals specifica- Requirements and Tests tions. SPECIFICATIONS FOR STANDARD-GRADE REFERENCE MATERIALS (An American Chemical Society Publication) September 1999 768 pp.; 113 line illus Requirements and Tests 32. 0-8412-3671-2 $165.00w/$132.00
7b order, or for more informaiion, please write to:
OXFORD UNIVERSITY PRESS • 198 Madison Avenue, N e w York, NY 10016. To order any book by credit card, call toll-free 1-800-451-7556. Prices and publication dates are subject to change. www.oup-usa.org/acs