Documente Academic
Documente Profesional
Documente Cultură
BTSRXUBRD)
Function
Use this command to rename an RXU board and modify the verification threshold of transmit
bandwidth, receive bandwidth, RXU specification and number of TRXs of an RXU board.
This command applies to DBS3900 GSM, BTS3900 GSM, BTS3900A GSM, BTS3900L GSM,
BTS3900AL GSM, BTS3900E GSM, DBS3036, BTS3036, and BTS3036A.
If users require a specific verification threshold instead of a BSC-level verification threshold, run
this command to set Configure Check Threshold or Not to default value Yes, and set Forward
Bandwidth, Receive bandwidth, and TRX Number.
Note
The RXU specification of the GRRU board is categorized into RRU3008_V1, RRU3008_V2,
RRU3029, OTHER_RXU.
The RXU specification of the MRRU board is categorized into RRU3908_V1, RRU3908_V2,
RRU3920_V1, RRU3922E, RRU3926, RRU3928, RRU3929, RRU3936, RRU3938, RRU3942,
RRU3960, RRU3961, OTHER_RXU.
The RXU specification of the GRFU board is categorized into GRFU_V1, GRFU_V2,
GRFU_V3, GRFUe, OTHER_RXU.
The RXU specification of the MRFU board is categorized into MRFU_V1, MRFU_V2,
MRFU_V2a, MRFU_V3, MRFUd, MRFUe, OTHER_RXU.
If an RRU or RFU whose parameter values are modified cannot establish links or operate at the
maximum CPRI line bit rate, you can run the command STR BTSCPRILBRNEG to start a
CPRI line bit rate negotiation.
Parameters
Unit: None
Unit: None
,;="'
Unit: None
Unit: None
Unit: None
Unit: None
Unit: None
Unit: None
Parameter ID Parameter Parameter Description
Name
Actual Value Range: 0~23
Unit: None
Unit: None
Unit: None
Unit: 100kHz
Unit: 100kHz
Unit: None
Unit: None
Unit: None