Documente Academic
Documente Profesional
Documente Cultură
4 13/16"
880S2 (122mm) Two-Gang Stamped Steel Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
3 15/32" (4) 1/2" (12.7mm), (8) 3/4" (19.1mm) 117 1 3/4" (44mm) 1/2" (12.7mm)
(88mm) (4) 1" (25mm) (58/59)
7 15/16"
(202mm) Country of Origin: Mexico
4 13/16"
880S3 (122mm) Three-Gang Stamped Steel Floor Box – Fully Adjustable.
3 15/32" TECHNICAL SPECIFICATIONS
(88mm) Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
(5) 1/2" (12.7mm), (11) 3/4" (19.1mm) 180 1 3/4" (44mm) 1/2" (12.7mm)
12" (6) 1" (25mm) (56/68/56)
(305mm)
Country of Origin: Mexico
3 23/32"
880M1 (94mm) One-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
2 15/32" (5) 1/2" (12.7mm), 37 1 3/4" (44mm) 1/2" (12.7mm)
4 13/16" (63mm) (5) 3/4" (19.1mm)
(122mm) Country of Origin: Mexico
880M2 4 13/16" Two-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
(122mm)
TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
2 15/32"
(63mm) (8) 1/2" (12.7mm), 80 1 3/4" (44mm) 1/2" (12.7mm)
7 15/16" (8) 3/4" (19.1mm) 40/40
(202mm) Country of Origin: Mexico
4 13/16"
880M3 (122mm) Three-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
2
OmniBox Series Cast Iron Floor Boxes Ordering Information
Catalog No./Item Description/Specifications
880CS1-1 4 3/8" One-Gang Cast Iron Floor Box – Fully Adjustable.
(111mm)
TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
(4) 1" (25mm) 48 1 3/4" (44mm) 1/2" (12.7mm)
3 7/16"
(87mm)
5 3/16"
(132mm) Country of Origin: China
880CS1-NA 4 3/8" North America Made One-Gang Cast Iron Floor Box – Fully Adjustable.
(111mm)
TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
(4) 1" (25mm) 48 1 3/4" (44mm) 1/2" (12.7mm)
3 7/16"
(87mm)
5 3/16"
(132mm) Country of Origin: USA
880CS2-NA 5 3/16" North America Made Two-Gang Cast Iron Floor Box – Fully Adjustable.
(132mm) TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
(6) 1" (25mm) 94 1 3/4" (44mm) 1/2" (12.7mm)
(45/49)
8 1/2" 3 7/16"
(216mm) (87mm) Country of Origin: USA
880CS3-NA 5 3/16" North America Made Three-Gang Cast Iron Floor Box – Fully Adjustable.
(132mm)
TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
(8) 1" (25mm) 160 1 3/4" (44mm) 1/2" (12.7mm)
(53/54/53)
12 1/2" 3 7/16"
(318mm) (87mm) Country of Origin: USA
Single-gang stamped steel and triple-gang cast iron models of OmniBox Series Floor Boxes.
3
OmniBox Series Cast Iron Floor Boxes Ordering Information (continued)
Catalog No./Item Description/Specifications
880CM1-1 4 3/8" One-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
(111mm)
TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
880CM2-1 5 3/16" Two-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
(132mm)
TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
2 7/16" (6) 1" (25mm), 76 1 3/4" (44mm) 1/2" (12.7mm)
8 1/2" (62mm) 36/40
(216mm)
Country of Origin: USA
880CM3-1 5 3/16" Three-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
(132mm)
TECHNICAL SPECIFICATIONS
Cubic Inch Adjustment Adjustment
Conduit Openings Capacity Before Pour After Pour
(8) 1" (25mm), 118 1 3/4" (44mm) 1/2" (12.7mm)
12 1/2" 2 7/16" 39/40/39
(318mm) (62mm)
Country of Origin: USA
Cover Plates for OmniBox Series Floor Boxes provide access to a wide range of connectivity
and are available in both metal and nonmetallic fabrications.
4
OmniBox Series Floor Boxes Solid Brass Cover Plate Flanges Ordering Information
Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications
817B One-Gang Brass Combination 837C Three-Gang Brass Carpet
Carpet & Tile Flange – Accepts Flange – For use on 880S3,
Ortronics® MAB6TJ TracJack and 880M3, 880CS32-1, and
MAB3S2 Series II adapters and 880CM3-1 Floor Boxes.
13"
Wiremold CM Series inserts, (330mm)
5 3/4" Country of Origin: China
6 1/16" 5 1/16" sold separately. (146mm)
(154mm) (129mm)
Country of Origin: China
817T One-Gang Brass Tile Flange –
827B Two-Gang Brass Combination For use on 880S1, 880M1,
Carpet and Tile Flange – Accepts 880CS1-1, and 880M1-1
Ortronics® MAB6TJ TracJack and Floor Boxes.
MAB3S2 Series II adapters and Country of Origin: China
Wiremold CM Series inserts, 4 1/2"
9 1/16" (114mm) 3 1/2"
6 1/16" (230mm) sold separately. (89mm)
(154mm)
Country of Origin: China
827T Two-Gang Brass Tile Flange –
837B Three-Gang Brass Combination For use on 880S2, 880M2,
Carpet and Tile Flange – Accepts 880CS2-1, and 880CM2-1
Ortronics® MAB6TJ TracJack and Floor Boxes.
MAB3S2 Series II adapters and
7 5/8" Country of Origin: China
Wiremold CM Series inserts, (194mm)
13 5/16" sold separately. 4 1/2"
(338mm) (114mm)
6 1/16" Country of Origin: China
(154mm)
817C
One-Gang Brass Carpet Flange – 837T Three-Gang Brass or Brushed
For use on 880S1, 880M1, Aluminum Tile Flange – For use
880CS1-1, and 880CM1-1 on 880S3, 880M3, 880CS3-1, and
Floor Boxes. 880CM3-1 Floor Boxes.
5 3/4"
4 3/4" Country of Origin: China
(146mm)
(121mm) Country of Origin: China
11 3/4"
827C
Two-Gang Brass Carpet Flange – (298mm)
For use on 880S2, 880M2, 4 1/2"
(114mm)
880CS2-1, and 880CM2-1
Floor Boxes.
8 7/8" Country of Origin: China
5 3/4" (225mm)
(146mm)
NOTE: UL Listed for tile, terrazzo, and carpet floors. All cover assemblies
Brass covers and flanges are not interchangeable with aluminum or nonmetallic for the OmniBox
Floor Box Series have
covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. TopGuard protection.
5
OmniBox Series Floor Boxes Metal Cover Plates Ordering Information
Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications
828R Brass Duplex Cover Plate – Flip 829STC
Brass Communication Cover
lids. Can also be used with a 106 Plate – Data slides. Feed through
type communication adapter. only, not for use with a mounting
plate for communication jacks.
4 3/16"
4 3/16" Country of Origin: China 3 1/8" (106mm) Country of Origin: China
3 1/8" (106mm) (79mm)
(79mm)
for 20A or 30A single locking device plates (sold separately). For
receptacles. Device opening is use with 828GFITC or 828GFITCAL
2 5/8" (67mm). For use with cover plates. (Sold separately)
maximum female locking device of Country of Origin: USA
1.58" diameter, and maximum male
4 3/16" 3 1/8" plug face of 2.25" diameter
(106mm) (79mm)
Country of Origin: China
828SPTC
Brass Duplex Cover Plate –
Screw plugs. Screw plugs are
1 1/2" (38mm) in diameter.
Country of Origin: China
4 3/16"
3 1/8" (106mm)
(79mm)
NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic
All cover assemblies
covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. for the OmniBox
Floor Box Series have
TopGuard protection.
6
OmniBox Series Floor Boxes Brushed Aluminum Cover Plate Flanges Ordering Information
Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications
818TCAL One-Gang Brushed Aluminum 818TAL One-Gang Brushed Aluminum
Combination Carpet and Tile Tile Flange – For use on 880S1,
Flange – Accepts Ortronics® 880M1, 880CS1-1, and 880M1-1
MAB6TJ TracJack and MAB3S2 Floor Boxes.
Series II adapters and Wiremold
6" 5"
CM Series inserts, sold separately. Country of Origin: China
(152mm) 4 1/2" 3 1/2"
(127mm) (114mm) (89mm)
Country of Origin: China
NOTE: UL Listed for tile, terrazzo, and carpet floors. All cover assemblies
Brass covers and flanges are not interchangeable with aluminum or nonmetallic for the OmniBox
Floor Box Series have
covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. TopGuard protection.
7
OmniBox Series Floor Boxes Metal Cover Plates Ordering Information
Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications
828R-TCAL Brushed Aluminum Duplex 830CKTCAL Brushed Aluminum Cover
Cover Plate – Flip lids. Plate – Power or communication
Can also be used with a 106 plate with 2" (51mm) and 1 1/4"
type communication adapter. (32mm) plugs.
Country of Origin: China
Country of Origin: China
4 5/16" 4 5/16" NOTE: Acceptable for use with
3 1/4" (110mm) 3 1/4"
(110mm)
(83mm) (83mm) threaded conduit when passing
through power cables.
NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic
All cover assemblies
covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. for the OmniBox
Floor Box Series have
TopGuard protection.
8
OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges Ordering Information
Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications
817TCAL-BK One-Gang Powder-Coated 827TAL-BK Two-Gang Powder-Coated
817TCAL-GY Aluminum Combination Carpet 827TAL-GY Aluminum Tile Flange – For use
817TCAL-BS and Tile Flange – Accepts 827TAL-BS on 880S2, 880M2, 880CS2-1,
817TCAL-NK Ortronics® MAB6TJ TracJack and 827TAL-NK and 880CM2-1 Floor Boxes.
817TCAL-BZ MAB3S2 Series II adapters and 827TAL-BZ Flanges are available in five
Wiremold CM Series inserts, decorative colors: black, gray
sold separately. Flanges are brass,nickel and bronze.
available in five decorative colors:
Country of Origin: USA
black, gray brass,nickel and bronze.
6 1/16" 5 1/16" Country of Origin: USA
(154mm) (129mm) 7 5/8"
4 1/2" (194mm)
(114mm)
NOTE: Pricing varies depending on country of origin. Consult your local sales representative for more information.
9
OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges Ordering Information (Continued)
Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications
829CKAL-3/4BK Powder-Coated Aluminum 828MAAP A/V Adapter Plate – Sheet metal
829CKAL-3/4GY Cover Plate – Power or adapter plate that accepts two (2)
829CKAL-3/4BS communication plate with 2" Extron Electronics MAAP style
®
829CKAL-3/4NK (51mm) and 3/4" (19.1mm) plugs. device plates (sold separately). For
829CKAL-3/4BZ Covers are available in five use with 828GFITC or 828GFITCAL
decorative colors: black, gray cover plates. (Sold separately)
brass,nickel and bronze.
Country of Origin: USA
Country of Origin: USA
4 5/32"
(110mm) 3 1/4"
(83mm)
NOTE: Acceptable for use with
threaded conduit when passing
through power cables.
10
OmniBox Series Floor Boxes Nonmetallic Cover Plate Flanges Ordering Information
Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications
817PCC-BLK One-Gang Nonmetallic 837PCC-BLK Three-Gang
817PCC-BRN Carpet Flange – Available in Nonmetallic
black or brown. For Ortronics® 837PCC-BRN Flange – Available in black or
connectivity use with 829PFLRT brown. For Ortronics® connectivity
Cover. For Activate connectivity use with 829PFLRT Cover. For
use with 829PFL Cover. Accepts 13"
Activate connectivity use with
Ortronics® MAB6TJ TracJack and (330mm) 829PFL Cover. Accepts Ortronics®
5 3/4" MAB6TJ TracJack and MAB3S2
5 3/4" MAB3S2 Series II adapters and (146mm)
4 3/4"
(146mm) (121mm) Wiremold CM Series inserts, Series II adapters and Wiremold
sold separately. CM Series inserts, sold separately.
Country of Origin: Mexico
Country of Origin: Mexico
827PCC-BLK Two-Gang Nonmetallic
NOTE: UL Listed for tile, terrazzo, and carpet floors.
827PCC-BRN Carpet Flange – Available in
black or brown. For Ortronics® Brass covers and flanges are not interchangeable with
connectivity use with 829PFLRT aluminum or nonmetallic covers and flanges. Nonmetallic
covers are interchangeable with aluminum flanges.
Cover. For Activate connectivity
use with 829PFL Cover. Accepts
8 7/8"
Ortronics® MAB6TJ TracJack and
5 3/4" (225mm) MAB3S2 Series II adapters and
(146mm) Wiremold CM Series inserts, sold
separately.
Country of Origin: Mexico
*Replacement flip lids can be ordered under Cat. No. PFL-BLK and PFL-BRN. Each Cat. No. comes with three flip lids. The above cover
plates are listed for tile, terrazzo, and carpet floors.
NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges.
Nonmetallic covers are interchangeable with aluminum flanges.
11
NOTES
NOTE: All brand and product names referenced in this document are
registered trademarks or trademarks of their respective holders.