Documente Academic
Documente Profesional
Documente Cultură
1. Use KCL to find the unknown currents in the circuit shown in Fig.1. Assume that I0 = 2 A, I1 = 4 A,
IS = 8 A, and VS = 12 V. Using these results, find the values of the resistances R1-R3, if R0 = R4 = 1 .
2. For the circuit shown in Fig.2, determine the current flowing through each resistor and the voltage V
appearing across the current source I (= 1 A).
3. For the circuit shown in Fig.3, determine which components are absorbing power and which are
delivering power. Is conservation of power satisfied for this circuit? Justify.
5. Determine the equivalent resistance of the infinite network of resistors shown in Fig.5. All resistors are
of equal value R.
6. Using node voltage analysis for the circuit shown in Fig.6, determine the current I flowing through the
voltage source. Data: R1 = 100 , R2 = 5 , R3 = 200 , R4 = 50 , VS = 50 V, and IS = 0.2 A.
I0 R0 R1 I2 1 –5 V+
I1
R2 B
IS 4A 1A
+ +
+ R3 2 3
I3 A D E 10 V
VS I V –
–
–
R4
C
Fig.1
4 5 6 –10 V+ Fig.3
15 7
Fig.2
I
2 + R1
0.5I 24 V 5
–
I
+
–
Fig.4
R2
VS
R3 IS R4
Req
continues Fig.6
Fig.5