Sunteți pe pagina 1din 198

Training TM-1862

TM
 AVEVA Everything3D
Everything3D (1.1)
Guide Lexicon
 AVEVA Everything3D
Everything3D (1.1)
Lexicon TM-1862

© Copyright 2012 to current year. 2 www.aveva.com


 AVEVA Everything3D
Everything3D (1.1)
Lexicon TM-1862

© Copyright 2012 to current year. 2 www.aveva.com


 AVEVA Everything3D
Everything3D (1.1)
Lexicon TM-1862

Revision Log

Date Revision Description Author Reviewed Approved


14/12/2012 0.1 Issued for Review AVEVA E3D™ (1.1) HU
12/01/2013
12/01/2013 0.2 Reviewed HU PJH
06/03/2013 1.0 Issued for Training AVEVA E3D™ (1.1) AH PJH PJH

Updates
Change highlighting will be employed for all revisions. Where new or changed information is presented
section headings will be highlighted in Yellow.

Suggestion / Problems
If you have a suggestion about this manual or the system to which it refers please report it to AVEVA
Training & Product Support at tps@aveva.com

This manual provides documentation relating to products to which you may not have access or which may
not be licensed to you. For further information on which products are licensed to you please refer to your
licence conditions.
conditions.

Visit our website at http://www.aveva.com

Disclaimer
1.1 AVEVA does not warrant that the use of the AVEVA software will be
be uninterrupted, error-free or free
from viruses.

1.2 AVEVA shall


shall not be liable for: loss of profits;
profits; loss of business
business;; depletion
depletion of goodwill
goodwill and/or
and/or similar
losses; loss of anticipated savings; loss of goods; loss of contract; loss of use; loss or corruption of
data or information; any special, indirect, consequential or pure economic loss, costs, damages,
charges or expenses which may be suffered by the user, including any loss suffered by the user
resulting from the inaccuracy or invalidity of any data created by the AVEVA software, irrespective of
whether
whether such losses are suffered directly or indirectly, or arise in contract, tort (including negligence)
negligence)
or otherwise.

1.3 AVEVA's total liability in contract, tort (including negligence),


negligence), or otherwise,
otherwise, arising in connection with
the performance of the AVEVA software shall be limited to 100% of the l icence fees paid in the year
in which the user's claim is brought.

1.4 Clauses 1.1 to 1.3 shall apply to the fullest extent permissible at law.

1.5 In the event of any conflict between


between the above clauses
clauses and the analogous clauses in the software
licence under which the AVEVA software was purchased, the clauses in the software licence shall
take precedence.

© Copyright 2012 to current year. 3 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Copyright

 All intellectual property rights, including but not limited to, copyright in this manual and the associated
software, (including source code, object code, and any data) belongs to or is validly licensed by AVEVA
Solutions Limited or its subsidiaries.

 All rights are reserved to AVEVA Solutions Limited and its subsidiaries. The information contained in this
document is commercially sensitive, and shall not be copied, reproduced, stored in a retrieval system, or
transmitted without the prior written permission of AVEVA Solutions Limited. Where such permission is
granted, it expressly requires that this Disclaimer and Copyright notice is prominently displayed at the
beginning of every copy that is m ade.

The manual and associated documentation may not be adapted, reproduced, or copied, in any material or
electronic form, without the prior written permission of AVEVA Solutions Limited. The user may also not
reverse engineer, decompile, copy, or adapt the associated software. Neither the whole, nor part of the
product described in this publication may be incorporated into any third-party software, product, machine, or
system without the prior written permi ssion of AVEVA Solutions Limited, save as permitted by l aw. Any such
unauthorised action is strictly prohibited, and may give rise to civil liabilities and criminal prosecution.

The AVEVA products described in this guide are to be installed and operated strictly in accordance with the
terms and conditions of the respective licence agreements, and in accordance with the relevant User
Documentation. Unauthorised or unlicensed use of the product is strictly prohibited.

Copyright 2012 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved. AVEVA
shall not be liable for any breach or infringement of a third party's intellectual property rights where such
breach results from a user's modification of the AVEVA software or associated documentation.

The AVEVA Everything3D™ user interface is based on the Microsoft® Office Fluent™ user interface.

Trademark

 AVEVA™, AVEVA Everything3D™, and AVEVA E3D™ are registered trademarks of AVEVA Group plc or
its subsidiaries. AVEVA product names are trademarks or registered trademarks of AVEVA Solutions
Limited or its subsidiaries. Unauthorised use of trademarks belonging to AVEVA Group plc or its subsidiaries
is strictly forbidden.

Fluent is a trademark of Microsoft Corporation and the Fluent user interface is licensed from Microsoft
Corporation.

The Microsoft Office User Interface is subject to protection under U.S. and international intellectual property
laws and is used by AVEVA Solutions Limited under license from Microsoft.

 AVEVA product/software names are trademarks or registered trademarks of AVEVA Solutions Limited or its
subsidiaries, registered in the UK, Europe and other countries (worldwide).

The copyright, trademark rights, or other intellectual property rights in any other product or software, its
name or logo belongs to its respective owner.

 AVEVA Solutions Limited, High Cross, Madingley Road, Cambridge, CB3 0HB, United Kingdom.

© Copyright 2012 to current year. 4 www.aveva.com


CONTENTS

1 Introduct
Introduction
ion .................
...................................
..................................
..................................
...................................
..................................
..................................
.....................
.... 7
1.1 Aim ..................................................................
.....................................................................................................
.......................................................................
..........................................
...... 7
1.2 Objectiv
Objectives es ..................................................................
......................................................................................................
..................................................................
.............................. 7
1.3 Prerequ
Prerequisite
isites s.....................................................................
........................................................................................................
...........................................................
........................ 7
1.4 Course
Course Structur
Structure e ...................................................................
.......................................................................................................
......................................................
.................. 7
1.5 Using
Using this guide.....................................................................
.........................................................................................................
......................................................
.................. 7
1.6 Setting
Setting up the Training
Training CourseCourse ........................................
...........................................................................
...........................................................
........................ 8
2 Overview of the Lexicon Module ......................................................................................... 11
2.1 Data Hierarchy and Element Types........................................................................................... 11
2.2 User-D
User-Define
efined
d Attribut
Attributes
es...................................................................................................
.............................................................................................................
.......... 12
2.2.1 User
User System
System Defined
Defined Attribute
Attributes s ...................................
......................................................................
.........................................................
...................... 12
2.2.2 User-
User- Defined
Defined Element
Element TypesTypes ...............................................................................................
............................................................................................... 12
2.2.3 Status
Status Definition
Definitions
s and Values
Values ...................................................................
...............................................................................................
............................ 12
2.2.4 Databas
Databasee Views....................................................
.......................................................................................
................................................................
............................. 12
2.3 Features of the Lexicon User Interface..................................................................................... 13
2.4 The Lexicon
Lexicon Menu
Menu ....................................
.......................................................................
.......................................................................
..............................................
.......... 13
2.5 The Utilitie
Utilities
s Menu
Menu ...................................................................................
......................................................................................................................
................................... 14
2.6 The Display
Display Menu
Menu ...............................................................................................
......................................................................................................................
....................... 14
2.6.1 The Dictiona
Dictionary
ry Explorer
Explorer ...................................
.......................................................................
.....................................................................
................................. 14
2.6.2 Current
Current Element
Element Editor
Editor ..................................................................
.....................................................................................................
.......................................
.... 15
2.6.3 Databas
Databasee Views Editor...................................................................
......................................................................................................
.......................................
.... 16
2.6.4 Graphica
Graphicall View ....................................
.......................................................................
.......................................................................
..............................................
.......... 16
2.6.5 Search
Search and Search
Search Results
Results ..................................
......................................................................
................................................................
............................ 17
2.6.6 Command
Command Window
Window ....................................
.......................................................................
.......................................................................
........................................
.... 17
2.7 The Edit Menu
Menu ............................................................
...............................................................................................
................................................................
............................. 17
2.8 The Create
Create Menu
Menu ..................................................
.....................................................................................
......................................................................
................................... 18
2.9 The Modify
Modify Menu
Menu ...................................................................
.......................................................................................................
....................................................
................ 18
2.10 The Help
Help Menu....................
Menu........................................................
.......................................................................
................................................................
............................. 19
2.11 Schemat
Schematic
ic Model
Model Manager
Manager....................................................................
.....................................................................................................
................................. 19
Exercise 1 - Entry to AVEVA E3D .............................................................................................. 20
3 User- Defined Attributes ...................................................................................................... 21
3.1 UDA Hierarc
Hierarchy
hy ..................................................................
.....................................................................................................
.........................................................
...................... 21
3.2 UDA Fields (Current Element Editor) ........................................................................................ 22
3.2.1 General
General ...................................
.......................................................................
.......................................................................
.........................................................
...................... 22
3.2.2 Basic
Basic Definition
Definition.....................................................
........................................................................................
................................................................
............................. 23
3.2.3 Presenta
Presentation
tion ..................................
.....................................................................
.......................................................................
....................................................
................ 25
3.2.4 Protection
Protection ....................................................................
.......................................................................................................
.........................................................
...................... 26
3.2.5 Design
Design ..................................................................
......................................................................................................
................................................................
............................ 26
3.2.6 Miscellan
Miscellaneou
eous s ...................................................................
.......................................................................................................
....................................................
................ 26
3.3 Creating User- Defined Attributes  – A Worked Example ......................................................... 27
3.3.1 Creating
Creating a UDA W orld (UWRL) (UWRL) ....................................
.......................................................................
.........................................................
...................... 27
3.3.2 Creating
Creating a UDA Group Group (UGRO)
(UGRO) .........................................................
............................................................................................
................................... 27
3.3.3 Creating
Creating a User
User Defined
Defined Attribute...
Attribute......................................
.......................................................................
....................................................
................ 28
Exercise 2 Creating and Using UDAs .................................................................................... 31
4 User System Defined Attributes .......................................................................................... 33
4.1 USDA
USDA Hierarc
Hierarchy
hy .....................................................................
.........................................................................................................
....................................................
................ 33
4.2 USDA
USDA Definition
Definition.....................................................................
.........................................................................................................
....................................................
................ 33
4.2.1 USDA Limits
Limits and Valid Values
Values ......................................................
.........................................................................................
........................................
..... 34
4.3 Creating a USDA  – A Worked
Worked Example
Example.................................
.....................................................................
....................................................
................ 34
Exercise 3 Creating and Using USDAs ................................................................................. 38
5 User Defined Element Type ................................................................................................. 39
5.1 UDET
UDET Hierarc
Hierarchy
hy .....................................................................
.........................................................................................................
....................................................
................ 39
5.2 UDET
UDET Definit
Definition
ion .....................................................................
.........................................................................................................
....................................................
................ 39
5.2.1 General
General ...................................
.......................................................................
.......................................................................
.........................................................
...................... 39
5.2.2 Basic
Basic Definition
Definition...........................................................
..............................................................................................
..........................................................
....................... 40

© Copyright 2012 to current year. 5 www.aveva.com


 AVEVA Everything3D
Everything3D (1.1)
Lexicon TM-1862

5.2.3 UDET Hierarch


Hierarchy
y ..................................
.....................................................................
.......................................................................
..............................................
.......... 40
5.3 Creating a User- Defined Element Type (UDET)  – A Worked Example.................................... 41
5.3.1 Creating a UDET Element
Element World (UDETWL) (UDETWL)..............
....... ...............
...............
..............
..............
..............
...............
...............
..............
......... 41
5.3.2 Creating
Creating a UDET
UDET Group
Group (UDETGR)
(UDETGR)..................................
......................................................................
....................................................
................ 42
5.3.3 Creating a User Defined Element Type (UDET) .................................................................... 42
Exercise 4 Creating and Using UDET‟s ................
.................................
..................................
...................................
...............................
............. 44
6 Status
Status Cont
Control
rol ................
.................................
..................................
...................................
..................................
..................................
..................................
................45
6.1 Overview
Overview ....................................................................
........................................................................................................
................................................................
............................ 45
6.2 The Status Control Data Model ................................................................................................. 45
6.3 Hierarc
Hierarchy
hy Overview
Overview .....................................................................
.........................................................................................................
..............................................
.......... 46
6.4 Status Control Hierarchy - Lexicon........................................................................................... 46
6.5 Status Control Hierarchy  – Constructor Modules .................................................................... 47
6.6 Implementing Status Control – A Worked Example ................................................................. 47
6.6.1 Creating
Creating Status
Status Worlds ..........................................................
..............................................................................................
...............................................
........... 48
6.6.2 Creating
Creating Status
Status Groups
Groups ...................................
.......................................................................
.....................................................................
................................. 48
6.6.3 Creating
Creating Status
Status Definition
Definitionss...........................................................
...............................................................................................
.........................................
..... 49
6.6.4 Create
Create Status
Status Values
Values ...............................
....................................................................
.........................................................................
........................................
.... 50
6.6.5 Testing Status Control in AVEVA E3D Model ........................................................................ 53
Exercise 5 – Creating Status Values ......................................................................................... 56
6.7 Status Control Customisation ................................................................................................... 56
6.8 Data
Data Access
Access Control
Control .............................................
...............................................................................
.....................................................................
................................... 56
6.8.1 Prevent Modification of an Object of a Certain Status ............................................................ 57
6.8.2 Prevent Promotion of an Object by Certain Users ................................................................. 57
6.9 Auto
Auto Colours
Colours........................................................
...........................................................................................
......................................................................
................................... 57
6.9.1 Equipment with Design Status Not Controlled ....................................................................... 57
6.9.2 Equipment with Design Complete ......................................................................................... 58
6.10 PML Custom
Customisat
isation
ion.........................................................................................
................................................................................................................
....................... 58
6.11 .Net Customis
Customisatio
ationn (C#)
(C#) ...................................................................................
.........................................................................................................
...................... 58
6.12 Status Control Customisation  – A Worked Example ............................................................ 58
7 Database
Database View
Views
s .................
..................................
..................................
..................................
..................................
...................................
...............................
............. 63
7.1 Overview
Overview ....................................................................
........................................................................................................
................................................................
............................ 63
7.2 Database View World (DBVWWL) Hierarchy ............................................................................ 64
7.2.1 Creating Database View Administrative Elements ................................................................. 65
7.3 Database View (DBVW) Hierarchy ............................................................................................ 65
7.3.1 Creating
Creating Databas
Database
e View ............................................................................................
.......................................................................................................
........... 67
7.3.2 Creating a Database Views Elements ................................................................................... 68
7.4 Databas
Database
e Views Editor
Editor ......................................................................
..........................................................................................................
........................................
.... 72
7.4.1 Displaying the Database Views Editor ................................................................................... 72
7.4.2 View Properties
Properties tab....................................
.......................................................................
.......................................................................
........................................
.... 76
7.4.3 Data Sources
Sources tab ..................................................
.....................................................................................
................................................................
............................. 77
7.4.4 Columns
Columns tab ..................................
.....................................................................
.......................................................................
....................................................
................ 77
7.4.5 Preview
Preview tab..........................................
tab.............................................................................
......................................................................
..............................................
........... 79
7.5 Creating a Branch and Pipe Database View  – A Worked Worked Example...............
....... ...............
..............
..............
.............
...... 80
7.5.1 Creating
Creating the DBVW
DBVW ...................................
......................................................................
.......................................................................
........................................
.... 80
7.5.2 Defining
Defining the Data Sources
Sources ..............................................................................
....................................................................................................
...................... 83
7.5.3 Defining the ATTCOL and EXPCOL columns ........................................................................ 83
7.5.4 Testing
Testing the Databas
Database e View .......................................................................
...................................................................................................
............................ 86
Exercise 6 – Creating a Nozzle Database
Database View.........
..................
..................
..................
...................
...................
..................
..................
......... 88
7.6 Modifying the Branch and Pipe DBVW using SRCELE – A Worked Example......................... 89
7.6.1 Copying
Copying a Databas
Database
e View....................................................................
.....................................................................................................
................................. 89
7.6.2 Testing
Testing the Databas
Database
e View .......................................................................
...................................................................................................
............................ 93
Exercise 7 – Modifying the Nozzle Database View ................................................................... 95
7.7 Using Database Views for Lexicon Administration – A Worked Example .............................. 96
Exercise 8 – Create a DBVW that checks for UNSET Descriptions .........
..................
...................
...................
.............
.... 99

© Copyright 2012 to current year. 6 www.aveva.com


CHAPTER 1

1 Introduction

TM TM
The AVEVA Everything3D   AVEVA E3D Lexicon  training guide,is designed as a continuation to the
 AVEVA Everything3D System Administration Basic and Advanced training guides. guides. The Lexicon   Module
allows the system administrator complete control of the administration of the Dictionary (DICT) databases of
a project.

1.1 Aim

To understand the use of Lexicon  on an AVEVA E3D project using practical worked examples and
exercises.

1.2 Objectives

Through the completion of the training, the Trainee will have sufficient knowledge to complete the following
tasks:

 Create and use User- Defined  Attributes (UDA‟s), User System Defined Attributes (USDA‟s), and
User- Defined Element Types (UDET‟s).

 Outline the principles of Status Control and its administrative hierarchy.


hierarchy.

 Create, modify and implement Status Definitions and Values.

 Consider simple examples of automated Status Control events.

 Create, modify and implement Database Views.

1.3 Prerequisites

It is expected
ex pected that trainees will have completed the following
following training courses: TM-1860 AVEVA E3D System
 Administration (Basic)
(Basic) and TM-1861
TM-1861 AVEVA E3D System
System Administration
Administration (Advanced).
(Advanced).

Trainees who have not completed these courses, but can demonstrate a working knowledge ofAVEVA
 AVEVA E3D Administration,
Administration, may be permitted
permitted to undertake
undertake the course at the Trainers discretion.

1.4 Course Structure

Training will consist of oral and visual presentations, demonstrations and set exercises.

Each workstation will have a training project, populated with model objects. This will be used by the tr ainees
to practice their methods, and complete the set exercises.

1.5 Using this guide

Certain text styles are used to indicate special situations throughout


throughout this document:
document:

 Menu pull-downs and button press actions are indicated by bold dark turquoise text.

 Information the user has to key-in indicated by bold red text.

Supplementary information or guidance notes will be distinguished by a turquoise information symbol and
accompanying
accompanying text:

  Additiona
 Additionall information

© Copyright 2012 to current year. 7 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

References to other training guides/sections and documents will be distinguished by a book symbol and
accompanying text:

 Refer to other documentation


System prompts will be displayed in inverted commas using italicised bold text e.g. 'Choose function'.

Example files or inputs will be in the courier new font, utilising colours and styl es outlined above where
appropriate.

1.6 Setting up the Training Course

 As Lexicon is an Administrative module, access is restricted to free users only.

Login to the AVEVA E3D Lexicon  using the details provided by the Trainer. They will typically be as shown
below:

Project Training

Username SYSTEM

Password XXXXXX

MDB A-PIPING

Click the Lexicon tile.

Select Utilities > Training Setup… from the main menu to display the Training Setup form. Navigate to the
Lexicon tab.

© Copyright 2012 to current year. 8 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Check the Setup Training Course checkbox, click the Apply button and close the form.

© Copyright 2012 to current year. 9 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

© Copyright 2012 to current year. 10 www.aveva.com


CHAPTER 2

2 Overview of the Lexicon Module

The Lexicon  module allows the system administrator to create and manage a number of User- Defined
attributes and element types. System attributes can also be managed allowing administrators to set valid
values and limits.

The Lexicon  module allows the creation and management of status workflows, via User- Defined status
values and status change events. Database views can also be constructed within Lexicon, enhancing
project reporting methods and allowing for the use of distributed attributes in projects.

2.1 Data Hierarchy and Element Types

Elements created in Lexicon  are stored in Dictionary (DICT) databases. To make elements created in
Lexicon   appear in a project, the DICT database must be included in a project Multiple Database (MDB)
using the Admin module.

 As with other AVEVA E3D modules, Lexicon elements are owned by other elements and must adhere to a
specific data hierarchy. Some minor variations exist in the Lexicon hierarchy; however the general hierarchy
is of the form shown. An Explorer is av ailable within Lexicon and the hierarchy for a specific element can be
viewed within it.

Dictionary

Element

Element

Element

 All elements created in Lexicon  are owned by the top level element, the Dictionary World. Beneath the
Dictionary World a number of element specific Worlds can be created. In turn, the elem ent worlds may own
element Groups. Worlds and Groups are administrative elements, providing a means of organising Lexicon
elements to meet project requirements.

 A range of elements can be created within Lexicon  which includes:

 User- Defined Attributes.

 User System Defined Attributes.

 User- Defined Element Types.

 Status Definitions and Values.

 Database Views.

Hierarchy details specific to each element will be considered later in the training guide. A brief description of
each element type is provided in t he sections that follow.

© Copyright 2012 to current year. 11 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

2.2 User-Defined Attributes

 A User-Defined Attribute (UDA) enables the administrator to add new attributes to any element in the
databases of a project. A UDA can be used to add engineering data to elements for example “Designed”,
“Checked”, etc.

UDAs are created as elements in Dictionary databases inside a project. Because LEXICON databases are
project specific, it is possible to define attributes to suit individual project requirements.

Once defined, UDAs may be accessed in much the same way as normal attributes, including setting values,
querying and reporting upon these values. Utilities such as the Data Output and Project Reconfiguration
functions treat UDAs as they would any other attributes. UDAs can also be used in expressions.

2.2.1 User System Defined Attributes

 A User System Defined Attribute (USDA) allows the administrator to place behaviour on a standard AVEVA
E3D element. For example, limits may be applied to t he attributes of top level elements within AVEVA E3D.

 A USDA allows the administrator to add the following behaviour to system attributes:

 Set valid values.

 Define limits.

 Hide attributes on forms.

 Category.

2.2.2 User- Defined Element Types

Within AVEVA E3D the standard set of elements are often used for a variety of purposes. A User- Defined
Element Type ( UDET) allows an element to be created with a more meaningful name. UDETs allow
Designers to create real engineering items e.g. “Pumps”, “Towers” or Areas. UDETs are based on existing
 AVEVA E3D Item Types.

2.2.3 Status Definitions and Values

Status Control provides administrators with a means to control and report on the status of individual model
objects as they progress through their lifecycles. Status control can be applied to any AVEVA E3D element
used in the constructor modules e.g. Model, Paragon, Spooler, Diagrams, Draft, Tags.

The desired project workflow is created by the administrator as a Status Definition, or number of Status
Definitions, in the Lexicon  module. Status Definitions own Status Values, which describe the stage of
development for the AVEVA E3D element concerned.

2.2.4 Database Views

Database views provide a way to consolidate data from elements and attributes distributed across
databases in an MDB.

These views are set up by an administrator using the Database Views Editor   and stored in the Lexicon
(DICT) database in a Database View World  (DBVWWL ). User database views may also be saved in a local
settings file. As well as the user definable views, each AVEVA E3D element type has its own Element View.

 A Database View uses a table to define a view of the data, which may be derived from a single or multiple
elements. There is a row in the Database View table for each element of a particular type that meets the
criteria defined by filters. These filters use the same concept as the search grid. If the criteria cannot be
expressed using attribute filters, it is also possible to defi ne an expression for evaluation. A row is present in
the table only if all the filter criteria are met.

© Copyright 2012 to current year. 12 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Database Views provide a method to derive data structures for a variety of purposes, in particular List
definitions in the Engineering Tags module, as well as for the Report Designer.

2.3 Features of the Lexicon User Interface

The Lexicon  Module has a similar User Interface (UI) to other AVEVA E3D administrative modules. When
the UI is first accessed the left hand side of the UI is populated with the Dictionary Explorer   and Current
Element Editor . The Search toolbar is also displayed beneath the main menus.

Space to the right hand side of the UI is gradually populated as other options, such as displaying Graphical
Views and Search Results, are selected from the Lexicon menus.

 A number of functions are available from the main menu. An overview of the menu options is provided in the
sections that follow.

2.4 The Lexicon Menu

The Lexicon  menu options available include getting and saving


database changes, switching to other modules, and exiting the
application.

© Copyright 2012 to current year. 13 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

2.5 The Utilities Menu

The Utilities  menu is normally only available if the AVEVA


Training Setup has been loaded. It is used by AVEVA Trainers to
aid the Training Process.

2.6 The Display Menu

The Display  menu allows users to select the forms that will be
displayed in the UI.

The options available under the Display menu are outlined below.

2.6.1 The Dictionary Explorer

The Display > Dictionary Explorer  option is used to display or hide the Dictionary Explorer .

 A list of elements held in the Lexicon Database is populated in


the Dictionary Explorer. Any element can be selected, copied, or
deleted, by clicking the right mouse button on t he element.

Options displayed when using the right


click menus are context sensitive. The
options displayed will vary depending on
the element selected. For example, if the
Current Element (CE) is the Dictionary
World:

© Copyright 2012 to current year. 14 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Examples of other menu options are shown below.

Example of the options when the CE is a UWRL Example of the options when the CE is a
(UDA World). UGRO (UDA Group).

2.6.2 Current Element Editor

The Display > Current Element Editor  option prompts the Current Element Editor  form. This form is used
to edit the CE and dynamically tracks the Dictionary Explorer. The displayed information changes depending
of the type of element selected.

Example of a UWRL. Example of a UDA.

© Copyright 2012 to current year. 15 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

2.6.3 Database Views Editor

The Display > Database Views Editor   option displays the Database View Editor   which, as the name
suggests, is used to create views on the AVEVA E3D database. This option is discussed in full later in this
guide.

2.6.4 Graphical View

The Display > Graphical View option displays the Graphical View which, in turn may be populated by a
right-click menu option within t he Dictionary Explorer.

This example shows a Status Definition workflow.

© Copyright 2012 to current year. 16 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

The example below shows User-


Defined Element Types based on
Equipment.

2.6.5 Search and Search Results

The Display > Search…  and Display > Search collections…  options are common across a number of
 AVEVA E3D modules, allowing the searching, collection, display and editing of data.

2.6.6 Command Window

The Display > Command Window… option allows use of the Command Window in Lexicon.

2.7 The Edit Menu

The options under the Edit menu, with the exception of Validate, are commonly used AVEVA E3D functions
and should be self-explanatory. Validate is used to check the Lexicon Database for errors which must be
corrected prior to using the Lexicon data.

© Copyright 2012 to current year. 17 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

2.8 The Create Menu

The Create  menu can be used to create Lexicon Elements. It is context sensitive depending on the CE
selected in the AVEVA E3D Hierarchy. This is illustrated in t he examples below.

These options are available at World Level.

The creation of a UDA and USDA are only


available when at UGRO Level.

2.9 The Modify Menu

The Modify  menu lists a number of options


relating to the Lock attribute of Lexicon
elements.

 Subject to the type of element selected,


some of the options may not be available.

© Copyright 2012 to current year. 18 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

2.10 The Help Menu

The Help  menu displays a range of


standard AVEVA E3D help options
available to the user.

2.11 Schematic Model Manager

Schematic Model Manager is an optional module. For further information refer to Schematic Model Manager
User Guide.

© Copyright 2012 to current year. 19 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Exercise 1 - Entry to AVEVA E3D

1. Enter the AVEVA E3D Training project as described and explore the Lexicon menu options.

© Copyright 2012 to current year. 20 www.aveva.com


CHAPTER 3

3 User- Defined Attributes

User- Defined Attributes enable the AVEVA E3D system administrator to add new attributes to any element
in the databases of a project.

UDAs can contain Limits e.g. Temperature 1  –  200, or have Valid Values e.g. AREA01, AREA02, etc.
applied to them.

3.1 UDA Hierarchy

In order to create a User Definable Attribute (UDA) the user must first
navigate to the correct place in the Lexicon  hierarchy. A UDA can only be
created from a UDA World (UWRL ) or UDA Group (UGRO).

With the Dictionary World selected as the CE, the user can create a new UDA World using either the main
Create menu or via the right click context menu in the Dictionary Explorer.

 A UDA Group and a UDA are created in a similar


way.

© Copyright 2012 to current year. 21 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

3.2 UDA Fields (Current Element Editor)

Once the UDA is created, the Current Element Editor  form displays a number of fields associated with the
UDA. The fields are grouped into a number of categories. The fields relevant to each category are
considered in the sections that follow.

3.2.1 General

Fields grouped into the General  category include some system generated values that cannot be directly
changed by the user (e.g. Owner). These fields appear in a lighter colour than fields that can be edited
directly.

Fields that can be edited directly include:

Name

The user can enter a valid name for the UDA in the Lexicon database. Special characters are not allowed.
 Although the system will accept numeric values it is good practice to avoid using them.

Lock

This field determines whether or not the fields defining a UDA are locked. The field can be set to True
(locked) or False.

Description

 A brief description of the UDA can be provided to assist users.

© Copyright 2012 to current year. 22 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

3.2.2 Basic Definition

Several fields relating to the Basic Definition  category are dynamic. The selections made in one field
dictate the values and other fields di splayed in the Current Element form.

Abbreviation Length

This field defines the minimum number of characters that the attribute name can be shortened to for use in
commands and attribute entry fields. For example, if the UDA Name is DIAGRAM, and the Abbreviation
Length is 5, the user must type 5 characters to define the UDA (e.g. DIAGR). The abbreviation name must
be less than or equal to the number of characters used in the User- Defined Name and must be unique in its
own right.

UDA Type

Subject to the type chosen, other relevant fields will be displayed accordingly. This is demonstrated in the
examples that follow.

Consider first a UDA Type set to logical.

The UDA Default value can then only be set as either „True‟ or „False‟.

If the user selects the UDA Type  of reference, then the Referred types  field is displayed (and the UDA
Default field is not).

© Copyright 2012 to current year. 23 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

The Referred types field can be populated from the Select Element Types  form. This form allows users to
select the required elements from a pre-populated list.

 A filter is available to assist users in making an appropriate selection.

If the UDA Type is set to real the UDA Units can be set.

© Copyright 2012 to current year. 24 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Element Type

This is the AVEVA E3D element that the UDA will be applied too e.g. Pipe, Equipment, Drawing, etc.

 As with Referred elements, there is a filter option to help users select the required Element Types.

Pseudo Attribute

Setting this logical attribute to True will indicate the UDA is pseudo attribute. Pseudo attributes allow for
dynamic values to be returned as needed, rather than having static values stored in the database.

The code required to return a pseudo attri bute value must be plugged in through the use of t he C# API and
is out of the scope of this guide.

Indexed UDA

The indexing of UDA‟s is controlled by the UTABLE attribute on the UDA definition in the dictionary DB. If
this is set to True then the UDA will be indexed. Indexing is allowed for text, reference and integer UDAs
only.

User- Defined Name

This allows the user to enter a name that will be given to the UDA of the element it will be created for. It
should be set to a similar name as the UDA.

Special characters are not allowed for UDA names. Although the system will accept numeric values it is
good practise to avoid using them.

3.2.3 Presentation

The fields within the Presentation category remain the same irrespective of the type of UDA created. A brief
description of each field is provided below.

Reporter text

 A text attribute used to define the default column heading used in reports. This field can be up to 20
characters in length.

UDA Category

This can be used to Group UDAs together within the Modify Attributes form.

Hidden

If this field is set to True the data will be hidden from the user.

© Copyright 2012 to current year. 25 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Hyperlink

If this field is set to True the text value of a UDA will be allowed to contain a path to an external file.

Connection

If this field is set to True it indicates that the UDA is a connection in the reference list.

3.2.4 Protection

The Protection category only contains one field relating to the UDA.

Protected

If this field is set to True, and the UDA is to be stored in a protected database, it will not be viewed.

3.2.5 Design

The Design category only contains one field relating to the UDA.

Valid Values

Depending on the type of UDA created, numeric values, a range of values, or text strings can be set in this
field. Items must be separated by a suitable delimiter specific to the type of value being entered. To assist
this process, the Edit Valid Values form can be opened from the v alid value entry cell.

3.2.6 Miscellaneous

The Miscellaneous category only contains one field relating to the UDA.

Limits or Valid Values Optional Flag

If this field is set to True the limits or valid values set in the form are optional.

© Copyright 2012 to current year. 26 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

3.3 Creating User- Defined Attributes – A Worked Example

The following example creates three UDAs: Designed , Checked, and Approved. The UDAs will be
assigned to PIPE, EQUIP, SHEET, and SPLDRG AVEVA E3D elements.

3.3.1 Creating a UDA World (UWRL)

When the Lexicon  Dictionary database is created using the Training Setup, a Lexicon world called UWRL-
PROJECT/DICT  is created. This database will be used during this training course.

However, if a new UDA World is required it can be created by following the steps outlined here.

Navigate to the Dictionary World /* then click the right


hand button of the mouse.

From the resulting context menu select:


Create > UWRLD: user defined attribute world

Use the Current Element Editor   to set the Name and the
Description as follows.

Name: UWRL-TRAINING

Description: UWRL Training

3.3.2 Creating a UDA Group (UGRO)

Navigate to the UDA World /UWRL-PROJECT/DICT.

From the right-click context menu select:


Create > UGROUP: User defined attribute group

Using the Current Element Editor  set the following:

UDA Group Name UGRO-TRAINING

Description UDA Group Training

© Copyright 2012 to current year. 27 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

3.3.3 Creating a User Defined Attribute

Navigate to the UDA Group UGRO-TRAINING

From the right click context menu select:


Create > UDA: User defined attribute

Enter the following values into the appropriate fields:

Name DESIGNED

Description Designed

 Abbreviation Length 8

UDA Type text

UDA Length 15

User-define name DESIGNED

Reporter text Designed

Select the Element Types Icon.

This will display all available types. Reduce the selection displayed using the Filter Option.

© Copyright 2012 to current year. 28 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Filter EQUIP

Select EQUIPMENT  followed by the Add to list


button.

Repeat for the PIPE, SHEET  and SPLDRG


element types.

Click the OK button.

On the new UDA DESIGNED select:

Create > UVALID: User defined valid value

Enter the following information:

Description JOE BLOGS

UDA VALUE JB

© Copyright 2012 to current year. 29 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

The process should be repeated for: JJ - JIMMY JAMES, and FS - FRED SMITH.

 Also set the Limits or Valid values Optional flag to True.

The UDA should now be set as follows.

In a similar way UDAs Checked and Approved can


be created.

Save work.

© Copyright 2012 to current year. 30 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Exercise 2 Creating and Using UDAs

1. Create the UDAs Checked and Approved and assign them to “PIPE”, “EQUIP”, “SHEET” and
“SPLDRG”.

2. Check that you can add information in AVEVA E3D Model, Draft or Spooler. Set the Limits or Valid
values Optional flag to TRUE on Designed and Checked but to False on APPROVED.

3. In the Model explorer of AVEVA E3D Model module navigate to a Pipe and select Modify >
Attributes…

Try setting :DESIGNED, :CHECKED and :APPROVED to v alid and invalid values.

© Copyright 2012 to current year. 31 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

© Copyright 2012 to current year. 32 www.aveva.com


CHAPTER 4

4 User System Defined Attributes

 A User System Defined Attribute (USDA) allows the administrator to place behaviour on a standard
 AVEVA E3D element. For example limits may be applied to attributes of top level elements within AVEVA
E3D.

 A USDA allows the administrator to add the following behaviour to system attributes:

 Set valid values

 Define limits

 Hide attributes on forms

 Category

The valid values and limits may be varied with element type. These values are defined by creating a USDA
element in the dictionary database.

4.1 USDA Hierarchy

UWRL

UGRO

In order to create a User System Definable Attribute (USDA) the user


must navigate to a UDA Group (UGRO).
USDA

ULIMIT UVALID

4.2 USDA Definition

 A number of fields are associated with the definition of a User System Defined Attribute. A brief description
of each field is provided below.

Name

The name by which the USDA will be referred


to in the AVEVA E3D modules.

Description

 A Text attribute which may be used to give a


description of the USDA.

System Attribute

Underlying system attribute to which the USDA


is to be applied.

© Copyright 2012 to current year. 33 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Element types

 A logical attribute, if set to true  the USDA will be applied to all AVEVA E3D elements with the attribute
defined in USYSTY ELEL – an Array containing a list of AVEVA E3D elements to apply the USDA to.

UDA Category

This field allows the administrator to group USDAs on the Attributes  form within AVEVA E3D modules, e.g.
UCAT „MYCATAGORY‟. If UCAT is left unset then it has no effect .

Hidden

On setting this logical attribute to True will indicate that the USDA will be hidden from the „Q ATT‟ command
and from the attribute form within AVEVA E3D. Querying of the individual UDA will not be affected by this
setting.

UTEAMS

If the UHIDE attribute has been set then the UTEAMS attribute can be used to indicate which teams the
USDA will be available too. UTEAMS can hold an array of values.

4.2.1 USDA Limits and Valid Values

 A USDA may own ULIMIT and UVALID elements to denote the limits and valid values.

These are described in Valid Values and Creating a USDA.

4.3 Creating a USDA – A Worked Example

The following example will restrict the FUNC attribute on EQUIPMENT to be 'Heatx' or 'Pump'. Create a
USDA as follows.

 A new UDA World is required, navigate to the Dictionary World /*.

Using the right click context menu select: Create > UWRLD: User- Defined attribute world .

Use the Current Element Editor  to set the Name and the Description as follows.

Name USWRL-TRAINING

Description System Attribute World

© Copyright 2012 to current year. 34 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Navigate to the UDA World USWRL-TRAINING

Using the right click context menu select:

Create > UGROUP: User- Defined attribute


group

Set the following:

UDA Group Name USDA-GROUP

Description Training System


Attribute Group

Navigate to the UDA Group USDA-GROUP

Using the right click context menu select:

Create > USDA: User system defined attribute

In a similar way to the creation of a UDA the following should be set:

Name UFUNC

Description Set restriction on FUNC


attribute on EQUI

System Attribute FUNC

Element Types EQUIPMENT

On the New USDA UFUNC select:

Create > UVALID: User- Defined valid value

© Copyright 2012 to current year. 35 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Description Pump

UDA VALUE PUMP

Repeat the process for  “Heat Exchanger”,


HEATX

UFUNC is set as shown.

The following is an example of limiting the Temperature range on a Pipe and Pipe Branch.

Name ULIMITTEMP

Description Set Temp Limits on a Pipe


& Branch

System Attribute TEMP

Element Types BRANCH PIPE

On the New USDA ULIMITTEMP select:

Create > ULIMIT: User- Defined Limits

© Copyright 2012 to current year. 36 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Description Temperature Range

MINIMUM VALUE -50

MAXIMUM VALUE 500

ULIMITTEMP should now be set as shown

© Copyright 2012 to current year. 37 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Exercise 3 Creating and Using USDAs

1. Using the described Worked Example create the USDA “UFUNC” and “ULIMITTEMP” and test them in
 AVEVA E3D Model.

2. Within AVEVA E3D Model explorer, Navigate to Equipment and Select Modify > Attributes….

 Valid Values are available in a Pull down.


3. In AVEVA E3D Model, navigate to a Pipe and select Modify > Attributes…

4. Try setting Temperature to 50 and -200.

© Copyright 2012 to current year. 38 www.aveva.com


CHAPTER 5

5 User Defined Element Type

Within AVEVA E3D the standard set of elements are often used for a variety of purposes. A User Defined
Element Type (UDET) allows an element to be created with a more meaningful name. UDETs allow
Designers to create real engineering items e.g. “Pumps”, “Towers” or Areas. UDETs are based on existing
 AVEVA E3D Item Types.
Types.

5.1 UDET Hierarchy

In order to cr eate a User- Defined Element Type (UDET) the user must
navigate to the correct place in the Hierarchy, i.e. a UDET World
(UDETWL) or UDET Group (UDETGR ).

5.2 UDET Definition

 A number of fields are associated with the


definition of a User- Defined Element Type.

 A brief description of
of each field is provided
provided in the sections
sections that follow.
follow.

5.2.1 General

The fields available in the General section are described below.

 Name

This allows the user to enter a v alid name for the UDET in the Lexicon database. Special characters are not
allowed and only alphabetic characters are allowed.

 Description

This allows the user to add a descriptive phrase to the UDET.

© Copyright 2012 to current year. 39 www.aveva.com


 AVEVA Everything3D
Everything3D (1.1)
Lexicon TM-1862

5.2.2 Basic Definition

The fields available in the Basic Definition section are described below.

 User-defined name

This allows the user to enter a name that will be given to the element for which the UDET is created. It
should be set to the Name of the UDET. But the user is allowed to change the UDET Name if required.

Special characters are not allowed for the UDET name and only alphabetic characters are allowed.

 Base Type

This allows the user to select the System Type that the UDET will be based on.

There is a filter option to assist with element


selection.

5.2.3 UDET Hierarchy

The fields available in the UDET Hierarchy section are described below.

 Owner Types

The UDET Owners list is automatically populated with the list of valid owners based on the Base Type
selected.

The User can remove valid owners from the list


using the tick box.

There must be at least one owner.

 Member Types

The UDET Members list is automatically populated with the list of valid members based on the Base Type
selected.

© Copyright 2012 to current year. 40 www.aveva.com


 AVEVA Everything3D
Everything3D (1.1)
Lexicon TM-1862

The user can remove valid members from the list


using the tick Box.

5.3 Creating a User- Defined Element Type (UDET) – A Worked Example

In the following example a Tank and Tower are created based on a AVEVA E3D base type of Equipment.

5.3.1 Creating a UDET Element World (UDETWL)

Navigate to the Dictionary World /*.

Using the right-click context menu select:

Create > UDETWL: User- Defined element


world

In the Current Element Editor   enter the


following:

Name TRAINING/UDETWL

Description Training Detail World

© Copyright 2012 to current year. 41 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

5.3.2 Creating a UDET Group (UDETGR)

Navigate to the UDET World, then using the


right click context menu select:

Create > UDETGR: User- Defined element


group

Use the Current Element Editor to set the


following:

Name EQUIP/UDET/GROUP

Description Equipment UDET Group

5.3.3 Creating a User Defined Element Type (UDET)

Navigate to UDETGR EQUIP/UDET/GROUP

From the right click context menu select:

Create > UDET: User defined element

Use the Current Element Editor   to set the


following:

Name TANK

Description Tank

User-defined Name TANK

Base Type Select Icon

© Copyright 2012 to current year. 42 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

This will display all available types. The selection


can be reduced using the Filter option.

Filter EQUI

Select EQUIPMENT

Click the OK button.

The Owner types, Member types and Hidden attributes can be left set to default.

The operation can be repeated for TOWER.

© Copyright 2012 to current year. 43 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Exercise 4 Creating and Using UDET’s

1. Using the above example, create a Tank and Tower element based on Equipment and test its use in
 AVEVA E3D Model.

2. In AVEVA E3D Model, navigate to an Equipment Zone for example  /ZONE-EQUIPMENT-AREA01 and


in the Equipment Application Select Create > Standard Equipment… – Select Tank from the User
Define Type Pull down.

3. The Command Line Syntax in AVEVA E3D Model would be NEW :TANK.

© Copyright 2012 to current year. 44 www.aveva.com


CHAPTER 6

6 Status Control

Throughout a project‟s lifecycle a typical AVEVA Plant project contains a number of design disciplines and
processes. In order to maximise productivity and minimise costs it is essential to control and communicate
the progress of design activities. The Status Control utility has been developed to assist designers with this
process.

6.1 Overview

The Status Control utility is a highly configurable tool that allows the user to control and report on the
progress of model objects. It works by defining a number of Status Values, that describe the current state of
a model object, and applying them to appropriate elements in the Constructor Modules (i.e. AVEVA E3D
Model, Draft, Paragon, etc.).

Status Values can perform two functions. They inform the user of an objects current status and they can be
used to influence subsequent design activities.

The terms used to describe Status Values are defined by the user. They may represent project milestones,
WBS elements, percentage completion rates, or they may be simple descriptive terms. The user can also
define the object types that the Status Values will be applied to. The object type will vary i n each Constructor
Module e.g. in Draft the object type may be DRWG but in AVEVA E3D Model the object type could be PIPE,
EQUI, etc.

By applying Data Access Control (DAC) the administrator can impose restrictions on model objects that
have reached a particular status. For example, certain activities, such as modifying an objects position, may
be prohibited once a certain status is reached.

Model objects that have one or more status values assigned to them are considered to be Controlled
Objects. It may not be necessary to control all instances of a model object type. As such the status control
tool allows the user to select which instances of the model object type will be controlled.

6.2 The Status Control Data Model

The diagram below illustrates the relationships that are utilised in AVEVA Plant by t he Status Control tool.

Status Values are created and stored in the dictionary database hierarchy. Within the Constructor Modules a
Status Link hierarchy is referenced by model objects. The Status Link also references the Status Value held
in the dictionary database.

© Copyright 2012 to current year. 45 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

6.3 Hierarchy Overview

Unique hierarchy structures are required in both Lexicon  and the Constructor Modules in order to
successfully implement the status control utility. The nature and function of the hierarchy structures are
considered in the sections that follow.

6.4 Status Control Hierarchy - Lexicon

New hierarchical elements have been created in Lexicon to facilitate Status


Control.

Status World elements (STAWLD) own Status Definitions (STADEF) which


in turn own Status Values (STAVAL). An optional level of hierarchy, sitting
immediately below the Status World, is the Status Group (STAGRP).

Status Worlds have an administrative function. They may store a number of


status groups and definitions. Each group or definition may be associated
with a project, design discipline, or an AVEVA E3D module.

Status Groups are an optional level of hierarchy. They allow a number of


definitions to be grouped within a status world. This may be useful where a
number of workflows exist within a particular discipline (i.e. different
checking requirements within a design discipline).

Status Definitions allow the user to set which model object types the status
values will be applicable to in the constructor modules (e.g. PIPE, EQUI,
etc.). An initial status value, used when a model object is first controlled,
can also be set in the Status Definition.

Status Values provide the descriptive terms and numerical values that will be applied to model objects as
they progress through the design process.

 An objects status changes throughout the design process; therefore it is necessary to update the status
value associated with it. This is achieved by setting valid transition values for each status value. From the
valid transitions, default settings to Promote and Demote the objects status can then be set. Only one
status value can be set for either the Promote or Demote default; however the object can have any
defined status values set as a v alid transition.

© Copyright 2012 to current year. 46 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

6.5 Status Control Hierarchy – Constructor Modules

Most administrative tasks relating to Status Control are carried out in Lexicon. However additional
hierarchy and pseudo attributes have been introduced to the constructor modules. Administrators need to
be aware of these elements if DAC‟s is to be implemented or further customisation is carried out.

The hierarchy employed for status control within the constructor modules
is hidden from the user. A Status Link World (STLNKW) owns a number of
Status Links (STALNK). Contained within the STALNK are a number of
pseudo attributes that are used to ref erence both status values and model
objects.

  A comprehensive list of pseudo attributes relating to status control is


supplied in the Status Control Reference Manual. Simple examples
of customisation and DAC’s are provided in later sections.

6.6 Implementing Status Control – A Worked Example

The focus of this example is the creation of the hierarchy elements required in Lexicon. The hierarchy
required in the constructor modules is globally distributed with the model objects. As such, Administrators
should only ever need to reference such elements, not create them.

This example will consider a simplified workflow that could be implemented for pipe modelling as shown
below.

Prior to creating the hierarchy in Lexicon  the Administrator must ensure that the MDB selected contains a
Dictionary database that can be written to.

© Copyright 2012 to current year. 47 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

6.6.1 Creating Status Worlds

To create the necessary hierarchy navigate to world level then click the right mouse button. From the
context menu select Create > STAWLD: Status Configuration world.

In the Current Element Editor   enter the details


provided below.

Name: PIPE-WORKFLOW

Desc: PIPE WORKFLOW STATUS MANAGEMENT

 A new STAWLD  element will be created and


displayed in the Dictionary Explorer.

6.6.2 Creating Status Groups

The workflow in this example caters for pipes that require stress tests and specialised supports. The
following exercise will allow for pipes that only require layout checks.

To distinguish between the two workflows, two Status Groups will be created. One for Critical Pipes,
requiring stress and support checks, and one for Non-Critical Pipes. This will allow users in the AVEVA E3D
Model module to set a suitable Focus Status to manage each type of pipe.

With the newly created STAWLD  selected as


the CE, click the right mouse button.

From the context menu select:

Create >STAGRP: Status definitions group.

In the Current Element Editor   enter the details


provided below.

Name: CRITICAL-PIPES

Desc: FOR PIPES WITH STRESS TESTS

 A new STAGRP element will be created and displayed in the dictionary explorer.

© Copyright 2012 to current year. 48 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

 A second STAGRP is required for the exercise that follows (for Non-critical pipes). In a similar manner
create a second STAGRP.

In the Current Element Editor   enter the details


provided below.

Name: NON-CRITICAL-PIPES

Desc: LAYOUT CHECKS ONLY

The two STAGRP elements will be displayed in the


Dictionary Explorer and the hierarchy should look
similar to this:

6.6.3 Creating Status Definitions

With the newly created STAGRP CRITICAL-PIPES  selected as the CE, click the right mouse button.

From the context menu select:

Create > STADEF: Status Definition .

In the Current Element Editor   enter the details


provided below.

Name: CRITICAL-PIPE-DEFINITION

Desc: WORKFLOW FOR CRITICAL PIPES

 At this stage the Initial Status  for controlled


model elements cannot be set, as no Status
Values  have been defined. For the time being,
this field will be left blank.

The STADEF allows the user to define  the type


of model elements that can be controlled in the
constructor modules. This is achieved by setting
the Controllable Element Types  field in the
Current Element Editor.

Click the left mouse button   when the pointer is


in the blank text box adjacent to the Controllable
Element Types field. A browse button  will be
displayed. Selecting the browse button will display
the Select Element Types form.

© Copyright 2012 to current year. 49 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

 All valid element types are displayed in the upper half of the
form. Above them is a filter text box allowing the user to refine
searches for particular element types.

 As the status definition will be used for Pipes in the AVEVA
E3D Model application type PIPE in the Filter text box. In the
scrollable list below the Filter field select the Pipe  element.
The Add to List button will now be active. Click the Add to
List  button to add the Pipe element type to the Chosen
Element Types area of the form.

Click the OK button. The Current Element Editor will update


the STADEF to show a Controllable Element Type of PIPE.

6.6.4 Create Status Values

With the necessary hierarchy and controllable elements defined the first status v alue can now be created.

With the newly created STADEF selected as the


CE, click the right mouse button. From the
context menu select:

Create > STAVAL: Status Value .

In the Current Element Editor   enter the details


provided below.

Name: WORK-PENDING

Desc: AWAITING RESOURCES

Both the name and description  fields can be


viewed   in the constructor modules. As such,
the description field can be used to supplement
the name given to the status value.

In addition to the name and description fields a Numerical Value  can also be associated with a Status
Value. The value used may indicate a task completion percentage, a work breakdown code, or other
similar parameters. In this case, the numerical value will represent how far through the design process
(between 0 and 100) a particular pipe is.

In this case, the Work Pending status value represents a period where work has not started. As such, the
numerical value will be left at zero.

The Transitions area of the form governs the relationships between Status Values. As this is the first
Status Value this area will be left blank for now. Transitions will be set when all required Status Values
have been created.

© Copyright 2012 to current year. 50 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

In the Dictionary Explorer, navigate to the STADEF


CRITICAL-PIPE-DEFINITION . Click the right mouse
button and select:

Create > STAVAL: Status Value .

In the Current Element Editor enter the details


provided below.

Name: DESIGN

Desc: PROVISIONAL LAYOUT

Numerical Value: 30

In a similar manner create the following Status Values:

Name: LAYOUT-CHECKS Name: ISSUED

Desc: CONFIRM LAYOUT Desc: ISSUED TO DRAFT TEAM

Numerical Value: 60 Numerical Value: 100

Name: STRESS-CHECKS Name: RE-WORK

Desc: CONFIRM STRESS Desc: ADJUSTMENTS REQUIRED

Numerical Value: 70 Numerical Value: 50

Name: SUPPORT-CHECKS

Desc: CONFIRM SUPPORTS

Numerical Value: 80

The status  of a model object should be controlled  in a series of suitably sized steps  that are
appropriate to the work flow . For example, there is little benefit in changing the status of an object from
Not Started to Completed in one step. To ensure that users make suitable status changes, Valid
Transitions should be defined for each Status Value .

Due to the cyclic nature of design processes the work flow associated with a model object may be quite
complex. To address this difficulty it is possible to associate a number of Valid Transitions with each
Status Value.

Make the STAVAL LAYOUT-CHECKS  the current


element. Click the left mouse button   when the pointer
is in the blank text box adjacent to the Valid Transitions
field. A browse button will be displayed. Selecting the
browse button will display the Select Valid Status
Transitions form.

In this simple example two workflows are possible from


this status value. If the work is accepted, the status may
be changed to show that layout checks have been
completed and stress checks can now be considered.

If the work is rejected, adjustments will be required and


re-work must occur. Selecting   the STRESS-CHECKS
and RE-WORK  checkboxes will account for these two
scenarios.

© Copyright 2012 to current year. 51 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

In the constructor modules the user will also be


able to edit model objects by promoting or
demoting the status. The promotion and
demotion statuses are set in  the Transitions
area.

 An option list  is provided adjacent to the


Promote field. Selecting the drop down arrow will
display the Valid Transitions for the STAVAL.

In this instance select the Status Value STRESS-


CHECKS.

The same process should be repeated for the


Demote  field, this time setting the Status Value
to RE-WORK.

The Current Element Editor will update to reflect


the new values.

Transition settings need to be made for each of the Status Values. Return to each Status Value and set the
following valid values and Promote/Demote default settings:

Name: WORK-PENDING Name: SUPPORT-CHECKS

Valid Transitions: DESIGN Valid Transitions: ISSUED, RE-WORK

Promote: DESIGN Promote: ISSUED

Demote: Leave Blank Demote: RE-WORK

Name: DESIGN Name: ISSUED

Valid Transitions: LAYOUT-CHECKS Valid Transitions: Leave Blank

Promote: LAYOUT CHECKS Promote: Leave Blank

Demote: Leave Blank Demote: Leave Blank

Name: LAYOUT-CHECKS Name: RE-WORK

Valid Transitions: RE-WORK, STRESS-CHECKS Valid Transitions: LAYOUT-CHECKS

Promote: STRESS-CHECKS Promote: LAYOUT CHECKS

Demote: RE-WORK Demote: Leave Blank

Name: STRESS-CHECKS

Valid Transitions: RE-WORK, SUPPORT-


CHECKS

Promote: SUPPORT-CHECKS

Demote: RE-WORK

Once all the transitions are set save work  then switch to the AVEVA E3D Model module. Use the login
details provided by the Trainer. They will typically be similar to this:

© Copyright 2012 to current year. 52 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Project Training

Username A.PIPER

Password A

MDB A-PIPING

6.6.5 Testing Status Control in AVEVA E3D Model

In the AVEVA E3D Model module, select Display > Status Controller… from the main menu. The Status
Controller form will be displayed.

The Status Controller form will initially be blank unless Status Layouts have been created previously. A
Status Layout will be created to track the progress of a number of pipes.

Select the Status Layout option list and select the

New Layout… option.

The Select Status Columns form   will be displayed.


Select the checkbox adjacent to WORKFLOW FOR
CRITICAL PIPES.

© Copyright 2012 to current year. 53 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

This form displays the description associated with the


Status Definitions created in Lexicon.

Selecting the checkbox will expand the column listing


available for the status definition. By default, Status
Layouts are initially created with up to four columns.

Three of the columns reflect fields populated when


the Status Values are created in Lexicon; Name,
Description, and Numeric value. The fourth column
allows comments relating to status changes to be
recorded.

The user can select which columns are displayed by


de-selecting checkboxes as required. If additional
columns are required to display other AVEVA E3D
attributes (e.g. Owner) they can be added after the
initial layout is created.

Leave all columns selected then click the OK button.

The Status Controller form will be populated with all


 AVEVA E3D elements that have their Type  set to
Pipe, as this was the element type specified for this
Status Definition in Lexicon .

Save the layout by selecting the Save Status Layout


button from the Status Controller  form.

The Save Layout As form will be displayed. Enter the


name Detailed  in the text field then click the OK
button.

The Status Controller form will update to reflect the


name of the saved layout. Although the layout contains
a range of pipes, none of them are controlled by the
Status Definition at this stage.

To apply the status definition to the pipes select a


range of pipes in the grid area of the Status Controller
form (now titled Detailed).

 Standard windows Shift and Control key


functionality can be used in this grid.

© Copyright 2012 to current year. 54 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

With the mouse pointer over one of the selected grid


entries click the right mouse button. From the context
menu  select the
Edit Status… option.

From the resulting Status  form select AWAITING


RESOURCES from the Value option list then click the
OK button.

The Status Controller form will update to reflect the


new status of the controlled pipes.

Select one of the pipes then select Promote from the


right click context menu in the Status Controller
form.

Continue modifying the status of the controlled pipes,


checking that promote and demote commands update
the status to the correct value.

© Copyright 2012 to current year. 55 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Exercise 5 –  Creating Status Values

Return to the Lexicon module  and open the STAWLD PIPE-WORKFLOW. Navigate to the STAGRP
NON-CRITICAL-PIPES  and create the necessary definitions and values to support the workflow below.

Test the Status Definition in AVEVA E3D Model. Try creating a Status Focus for Critical and Non-Critical
pipes within a single Status Layout.

6.7 Status Control Customisation

Status Control supports an extensive range of customisation options in the areas of Data Access Control,
PML and C#. Extensive consideration of this topic is outside the scope of this training course, however a
brief overview of possible functionality is provided in t he sections that follow.

 For details of customisation requirements please refer to the Status Control Reference Manual.

6.8 Data Access Control

The Status Control utility can be coupled closely with Data Access Control to preserve data integrity. A
variety of activities can be restricted. For example, only users with particular access rights may change the
status of an object once it has reached a certain stage; or, only certain users can assign or remove status
from a controlled object. Suitable error messages can also be generated to alert the user of any restriction.

Provided below are two example Data Access Control rules. They have been created on the basis of Roles
where the first PEROP grants all rights on all elements and attribute classes, then successive PEROP‟s
deny some rights under specific conditions.

© Copyright 2012 to current year. 56 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

6.8.1 Prevent Modification of an Object of a Certain Status

It may be desirable to ensure that a model object cannot be changed once it has reached a certain
status value. For example, if an item of equipment was very close to being issued but needed sign off, no
further modifications would be required. For the purpose of this example, this state could represent a Design
Status of 90%.

The Administrator can cater for this situation by creating a PEROP that denies modify and delete
operations on equipment for all attributes, with the qualifying condition  that the Design Status is
greater than or equal to 90%. The syntax for the condition would be:

COND ( ATTRIB STVNUM(ID /DesignStatus ) GE 90 )

 Expressions relating to Status Values usually require the name of the owning Status Definition to be
 provided as a qualifier. In this example /DesignStatus is the name of the Status Definition.

 A suitable error message would also need to be returned to the user e.g. DAC: You may not modify an
object that is ready for issue.

6.8.2 Prevent Promotion of an Object by Certain Users

It may be necessary to restrict which users are capable of promoting a model object once the object
reaches a certain status value . For example, a model object has been promoted to a Check Stress status
by a designer, but the Administrator wants to ensure that only a supervisor promotes the status to Checked.

In this case the Administrator should create a PEROP  that denies modify and delete operations on
STALNK (status link) elements for attribute VALREF (status value reference)   with the qualifying
condition  that the Design Status is currently at Check Stress. The syntax for the condition would be:

COND ( ATTRIB OWNER OF VALREF EQ ID /Design Status AND ATTRIB DESC OF VALREF EQ
„Stress Check‟ )

 As with the previous example, a suitable error message should be provided to the user e.g. DAC: You may
not modify an object that awaits stress c hecks.

6.9 Auto Colours

Status Values can be used in the Element Rules for Auto Colours. If suitable Element Rules are defined,
and Auto Colour rules added, then status distinctions can be made in the 3D model. For example,
uncontrolled equipment could be shown in red, while a range of other colours could be used to reflect key
status values. Typical syntax for element rules are shown below.

 The use of Auto Colours is not applicable to Status Control definitions that are applied to the DRAFT
application.

6.9.1 Equipment with Design Status Not Controlled

If the user wishes to show equipment items that are not controlled in a different colour the element rule
syntax would be:

Rule Name: Equipment Not Controlled

Types: EQUI

Rule: badref( attrib stvval( /EquipmentDesignStatus ) )

Where EquipmentDesignStatus  is the name of the STADEF defined in Lexicon.

© Copyright 2012 to current year. 57 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

6.9.2 Equipment with Design Complete

If the user wishes to show equipment items that are completed in another colour the element rule syntax
would be:

Rule Name: Equipment Complete

Types: EQUI

Rule: attrib stvnum( /EquipmentDesignStatus ) eq 100

Where EquipmentDesignStatus  is the name of the STADEF defined in Lexicon.

6.10 PML Customisation

Status Control operations can be carried out using PML. Any operation that can be carried out using the
Status Controller can also be done using appropriate PML objects and syntax.

By incorporating an event mechanism, specific company and project requirements can be accommodated.
User methods can be added as event handlers and called with single array arguments. Both Status change
events and database change events can be catered for in this way.

Status data can be manipulated using the PML object statusProjectHandler.pmlobj . This object
encapsulates a number of core routines that could also be used directly.

 Please refer to the Status Control Reference Manual for further details.

6.11 .Net Customisation (C#)

Customisation can be undertaken in .NET applications. This may be as an alternative to, or in conjunction
with the PML customisation. Where such customisation is carried out using C#, a number of Classes are
available to the user. They have similar functionality to the PML objects and can be used status values and
events.

 Please refer to the Status Control Reference Manual and AVEVA E3D .Net documentation for further
information.

6.12 Status Control Customisation – A Worked Example

For the purpose of reporting project progress, it is often desirable to run an overview status definition in
conjunction with a detailed status definition. Returning to the workflow considered in the previous worked
example, an additional overview status definition will be added. The diagram below shows the relationship
between the two status definitions.

© Copyright 2012 to current year. 58 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Design Phase I - Initial design activities, ending when a pipe is promoted to the status value Stress Checks.

Design Phase II - Starts when a pipe has the status v alue set to Stress Checks and finishes when the status
value Issued is achieved.

Design Phase III – Achieved when the status value Issued is reached.

Make the Dictionary World the CE then select Utilities >


Training Setup…from the main menu.

From the Lexicon tab of the Training Setup form, select the
 Add OVERVIEW Pipe Status Definitions checkbox then click
the Apply button.

The Status World is re-created with an additional Status


Definition for the Overview process. The Overview status
definition is also set to control pipes.

 Although the Status Definitions are contained within the same


Status World there is no means to link them directly in Lexicon.

The PML Library within AVEVA E3D holds a common object created for use with the Status Control utility.
The PML Object statusProjectHandler   contains a number of methods that allow automated events to be
initiated based on changes made to an element.

For the purpose of this exercise, adjustments will be made to the PML Object statusProjectHandler   that
will allow the Overview Status Definition to update based on changes in the Detailed Status Definition.

Navigate to the PMLLIB folder  in the AVEVA E3D installation, typically:

© Copyright 2012 to current year. 59 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

C:\Program Files (x86)\AVEVA\Plant\E3D1.1<version>\PMLLIB\common\objects

Open the common folder, followed by the objects folder. Navigate to the statusProjectHandler.pmlobj  file
and click the right mouse button. From the context menu select the Edit option.

 If an edit facility is not available in the context menu, open the file using Notepad or a similar text editor.
The methods defined in the file are listed at the top of the file. After each method is an area for
customisation and in some instances example syntax.

This exercise uses the afterStatusChange (ARRAY) method . Navigate to this area of the file. Two
customisations are included in this area of the file. The first customisation is an example of the methods
potential use and is supplied with AVEVA E3D. The second customisation has been created for training
purposes.

The PML expressions used check the Status Name of one Status Definition and, if it matches a set value,
assigns or sets the Status Name in another Status Definition. When this process occurs a comment is added
in the Status Layout.

Remove the $( and $) symbols from the top and bottom of the customisation text then save and close the
file. The customisation text is now active in the file.

Exit AVEVA E3D then Re-Enter   the Training project through the AVEVA E3D Model module  using the
details provided by the Trainer. They will typically be similar to this:

© Copyright 2012 to current year. 60 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Project Training

Username A.PIPER

Password A

MDB A-PIPING

If the Status Controller form i s not displayed, open it from the Display menu. Select the Detailed layout from
the Status Layout option list. Select all the pipes previously controlled. From the right click context menu
select the Remove Status option. Click the  Yes to All button on the subsequent confirmation message.

 A new Status Layout is required for the overview status


definition. From the Status Layout option list select
New Layout.

From the subsequent form, select  the checkbox


adjacent to HIGH LEVEL DESIGN UPDATE .

Deselect the checkbox adjacent to WORKFLOW FOR


CRTICAL PIPES then click the OK button.

Click the Save Status Layout   button and name the


layout Overview.

Within the Overview layout select the first five pipes.


Click the Edit Status  button and set the pipes to
INITIAL DESIGN ACTIVITIES.

Return to the Detailed status layout and select the first


five pipes in the layout. Using the Edit Status  button
set the status to AWAITING RESOURCES.

Select the first pipe in the list and promote  the status
of the pipe until it reaches the status value CONFIRM
STRESS.

Navigate back to the Overview status layout. The promoted pipe should now be at the status value
DESIGN-PHASE-II. The Comment column will be populated, notifying the user that an update has occurred
due to a changed status value within the CRITICAL-PIPE-DEFINITION status definition.

© Copyright 2012 to current year. 61 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Continue to promote other controlled pipes and check that the correct update occurs in the Overview status
layout.

© Copyright 2012 to current year. 62 www.aveva.com


CHAPTER 7

7 Database Views

E3D element information, that may be required on a deliverable document, is not always stored on the
element itself. The required information can be distributed over a number of associated elements. For
example, the primary information for a nozzle is stored on the NOZZ element itself, but additional
connectivity information may be stored on the connected Branch and/or Pipe elements and ownership
information stored on the Equipment, Zone and/or Site elements. A Database View is a method of collecting
all of this information into one common Element that can be reused throughout the project.

7.1 Overview

 A Database View defines a table for retrieving/viewing and manipulating data in the database; the data may
be derived from a single element or multiple elements. There is a row in the Database View table for each
element that has a particular element type and meets the criteria defined by attribute filters. These Filters
are similar in concept to those in the search grid. In addition, if element match criteria cannot be expressed
using attribute filters, it is possible to define an expression for evaluation.

For example, a Database View could be derived from all Equipment elements in the current MDB with a
descr iption of “Vessel”. The user specifies the required columns; each being a database attribute or an
expression run against the Equipment element. In addition, the user can specify how to navigate to related
elements, such as the owning SITE or ZONE, and derive further columns from those elements.

Database Views are defined and modified in the DICTIONARY databases using AVEVA E3D Lexicon and
are stored under a Database View World   element (DBVWWL ). However, ad-hoc working definitions may
be stored in a local user file. These methods allow:

 User- Defined Database Views for reports, and for testing.

 Project defined Database Views f or reports, shared via Global.

  Application defined Database Views for specialist applications.

Database Views are primarily used with in the AVEVA E3D Model module for creating reports with the
Report Designer and within Lexicon   module as an administrative tool to check the validity of a Projects
Dictionary.

 They are also used extensively by the Engineering TAGS module


There are three types of Database Views available:

Element Views  An Element View is automatically created and maintained by the system. These Views
are provided for all base Element Types within the project schema and are available to
all Users.

Project Views A Project View is a user-defined View of the data and is stored within a Lexicon
dictionary database. The Views are available to all Users. These Views may contain
more complex data i.e. the combining of an element‟s attributes (UDA  and Pseudo),
from associated items, and attribute based expressions.

User Views User Views may be copies of Project or Element Views, or views an Administrative
User has created and stored locally.

It is envisaged that an Administrator would create and refine individual User Views
prior to exposing the View to all Users by copying it to a project dictionary database,
where it would become a Project View.

© Copyright 1974 to current year. 63 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.2 Database View World (DBVWWL) Hierarchy

In order to create a Database View (DBVW)  the user must first navigate to the correct location within the
Lexicon  hierarchy. A DBVW may be created directly under a Database View World (DBVWWL) , or under
the administrative element‟s Database View Group (DBVWGR)   or a Database View Set (DBVWSE) , as
shown below. The administrative elements allow the user to group similar items together.

DBVWWL

DBVWGR

DBVWSE

DBVW DBVW DBVW

DBVWWL This is an administrative element for grouping Database Views and


associated owing items. A project must have a DBVWWL element within its
(Database View World) Dictionary Databases to enable the creation and use of Database Views
within that project.

DBVWGR This is an administrative element construct that can only be seen within the
Dictionary Explorer. It allows an Administrator the ability to group Database
(Database View Group) Views in ways that facilitate administration of them in the Dictionary
database.

DBVWSE This is a collection of views that are defined as a set for a given workflow or
common purpose. As such a DBVWSE is visible to the user when selecting
(Database View Set) database views and may be used within an application as a set of views for a
given task/report/workflow

DBVW
 A Database View element defines the table f or retrieving/viewing data table
constructed from the database hierarchy elements.
(Database View)

© Copyright 2012 to current year. 64 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.2.1 Creating Database View Administrative Elements

With the Dictionary World selected as the CE, the user can create a new Database View World  using either
the main Create menu or the right click context menu in the Dictionary Explorer .

 A Database View Group  (DBVWGR), and a Database


View Set (DBVWSE) are created in a similar way.

 An administrator can provide the DBVWWL, DBVWGR, and DBVWSE elements with a Name  and a
Description   using the Current Element Editor   so that their purpose can be easily identified at a later
stage.

Because the DBVWSE  elements are exposed to general users elsewhere within AVEVA E3D, it has an
additional attribute User-defined Name. This is the name that the users will see and use.

7.3 Database View (DBVW) Hierarchy

 As discussed before, a Database View is a view on a single element or on the associated data of multiple
elements, in a tabulated form. A Database View can contain various hierarchy elements that retrieve and
manipulate the data. These elements are described in detail later

The diagram below shows the various elements that can be used within a Database Views definition.

  A Database View can have multiples instances of its child elements, (dashed) except for a Creation
Rule (CRERUL) which it can only have one occurrence of.

© Copyright 2012 to current year. 65 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

DBVW

 All DBVW
elements except
 ATTFIL  ATTCOL SRCELE
 ATTFIL and
EXPFIL

EXPFIL EXPCOL CRERUL

SETATT SETSTA SETPAR

TESTEX

 All the elements that can belong under a Database View element have a number of fields. These fields are
grouped into categories. Each element has a General category, which is common, plus a number of fields
that are system generated values and cannot be directly changed by the user (e.g. Owner). These system
fields appear in a lighter colour than fields that can be edited directly.

Fields that can be edited directly include:

 Name

The user can enter a valid name for the Item Type.

 Lock

This field determines whether or not the fields defining a UDA are locked. The field can be set to True
(locked) or False.

 Description

 A brief description of the Element Type can be provided to assist users. This f ield is not available on
Element Types of the Database Views that are associated with UDAs due t o the UDA possibly having a
description.

© Copyright 2012 to current year. 66 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.3.1 Creating Database View

With one of the Database View Administrative Elements selected as the CE, the user can create a new
Database View using either the main Create  menu (Create > DBVW: Database view) or the right click
context menu in the Dictionary Explorer .

In addition to containing general fields, a DBVW has a number of Basic Definition category fields that are
used to define the view‟s contents and behaviour.

The User-defined name field allows the user to give the Database View a „friendly‟ name that all the users
will see throughout the AVEVA E3D product suite when they are viewing Project Views.

The Auto Creation setting determines whether items can also be created using the view.

 The ability to create items using the view is only available within the AVEVA Engineering TAGS
module.

The Element types field is where the user selects what elements the view is t o contain. The Element types
can either be manually typed into the field separated by spaces, or if the (…) e llipsis button is selected the
Select element types form will be shown.

© Copyright 2012 to current year. 67 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

The user adds and/or removes the Chosen element types by selecting the elements in the appropriate lists
and then using the respective Add to list or Remove selected  buttons to modify the list of Chosen
element types.

The Filter: textbox allows the user to filter the top list of available Element Types.

This list will include any UDETs that have been defined in the Dictionary database.

  As discussed before a DBVW can be based on multiple Element types.


Click the OK button to close the form.

7.3.2 Creating a Database Views Elements

With a Database View element selected as the CE, the user can create the elements that define the
database view‟s data contents. This can be achieved by using either the m ain Create menu or the right click
context menu in the Dictionary Explorer .

7.3.2.1 ATTFIL (Attribute Filter)

This element defines a filter that an element‟s specified attribute(s) must match to be included in the current
view. Both UDAs and Pseudo attributes can be filtered.

© Copyright 2012 to current year. 68 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

 A filter is defined in the Basic definition fields of the


 ATTFIL and includes the following fields:

Attribute : name of the attribute to filter.

Filter operator : a predefined list of operators which


determine how the attribute is to be qualified.

  All of the available operators are shown here:


Filter value: the value the attribute must match to be
true.

For example, to only populate the view with items


that have „W‟ in their name the Basic definition is
set to:

Attribute : NAMN

Filter operator : Contains

Filter value: „W‟

 This filter mechanism is the same as the attribute filter that is available within the AVEVA E3D search
grid.

7.3.2.2 EXPFIL (Expression Filter)


These define a Boolean expression that must evaluate to true for an element to be included in the current
view. The expression can be a PML 1 or an XPath 1.0 expression.

The Basic definition is the Expression  itself


and the Expression type; whether it is PML
or XPATH.

Some examples of valid PML 1 and XPATH expressions are shown below:

Example PML Expressions Elements that would be listed in the Database View

PSPEC EQ /A3B Items with a Pipe Spec. of /A3B.

HBOR GE 100 Items with Head Bore greater or equal to 100 NB.

Sections with a Specification Reference of DIN Spec


SPREF EQ /DIN-SPEC/HE300A
HE300A.

FUNC NE „FUTURE‟ All Equipment whose Function is not equal to FUTURE.

:MANUF EQ „Best Pumps Inc.‟ OR  All Items where the UDA :MANUF (Manufacturer) is either
:MANUF EQ „Better Pumps Ltd.‟ Best Pumps Inc. or Better Pumps Ltd.

Example XPATH Expressions Elements that would be listed in the Database View

 All Items with a RPTX (Reporting Text) sting length eq zero


string-length(@RPTX) = 0
character‟s

© Copyright 2012 to current year. 69 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.3.2.3 ATTCOL (Attribute Column)


This defines a column that returns the attribute value from the current source element(s).

To define an ATTCOL the Attribute  field in the Basic definition is set to the name of the database attribute
that is to be returned to the view; this can be a UDA or Pseudo attribute.

If the attribute is a qualified attribute then the qualifier must be entered into the Attribute Qualifier  field.

 An example is a Status Control attribute, where the Status Value Description (STVDSC) is a qualified
value of the Status Definition / EquipmentDesignStatus  element.

The User-defined name field allows the administrator to add a more user friendly / purposeful name that will
make the column more recognisable to the users. If the field is left as unset then the attributes Description
field value will be displayed.

The Read only field determines whether the users can i nteract back to the database and directly change an
element‟s attribute value via the current database view.

7.3.2.4 EXPCOL (Expression Column)

This defines a column that is based on an expression result. These columns are read only. The expression
can be a PML 1.0 or an XPath 1.0 expression.

In the Basic definition of the EXPCOL element the user enters the required PML or XPATH expression in the
Expression  field. Depending on the syntax of the expression, the user must select the relevant Expression
Type; either PML or XPATH from the pull-down list.

The User-defined name field allows the administrator to add a more user friendly / purposeful name that will
make the column more recognisable to other users. If the field is left as unset then the attribute‟s
Description field value will be displayed.

Depending on the evaluated result of the expression,


the user must select the relevant UDA type from the
pull-down list of available types. Failure to select the
correct UDA type may result in the column of the view
displaying no information, or returning an error.

7.3.2.5 SRCELE (Source Element)


Instead of using an expression to derive column(s) in the current view from other database elements from
the base element, a SRCELE can be used to navigate to the source element from which the attributes or
expressions required in the current view are taken. Using a SRCELE helps to separate navigation around
the database source elements and can simplify the definition of the columns

© Copyright 2012 to current year. 70 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

The SRCELE creates a sub-view from its position in the hierarchy. All of the attributes and expressions are
local to it, rather than being derived from complicated expressions that navigate and return results.

 An example may be a BRANCH report requiring information from the owing PIPE. Rather than create
multiple EXPCOL‟s that are in the format of <Attribute> of PIPE, a single SCRELE could be created and all
of the attributes that are required can be created as ATTCOLs.

The element of a SRCELE‟s Basic definition  are the Expression   field, which is the navigational
expression; this could be PIPE to navigate up to the owing PIPE, or OWNER of OWNER to navigate up two
levels of the hierarchy.

The Expression type field informs the system


the type of syntax that has been entered into
the Expression  field. This can be either PML
or XPATH and is selected from the pull-down
option list.

The Auto Creation setting determines whether items can be created within the actual view itself.

 The ability to create items within a view is only available within the AVEVA Engineering TAGS module.
It is possible to create nested SRCELE items. For instance, if
an example DBVW base element type was a 3D INST
element, the first SRCELE could navigate to the BRANCH
element, and in turn another SCRELE at the BRANCH level
may navigate to the PIPE element and again to the ZONE
element before finally navigating to the SITE element.

 An example of the DBVW hierarchy for this type of navigation


is shown here. At each level an ATTCOL element has been
added to display the NAME .

7.3.2.6 Other Element Types that are available


There are additional element types that a Database View can contain however; these are currently only
used by the AVEVA Engineering TAGS module. For information these are listed below with summarised
descriptions of what they are used for.

 For more detailed information see the AVEVA Training Guide TM-3552 AVEVA Plant Tags (Admin)

Item Type Description

CRERUL Used to allow the definition of creation rules for creating row elements
and column elements within a database view. All SRCELE‟s are
(Creation Rule Element) created with one but are not used.

SETATT  A rule used to set an attribute when an element is created. If the value
expression is left unset then the application or user are prompted for
(Set Attribute Rule) input.

SETPAR  A parameter for use when executing rules to create elements within the
(Set Parameter Rule) database view.

SETSTA Set the status definition to apply to an element when created in the
(Set Status Rule) database view.

TESTEXP  An expression used to return a Boolean result for the SETATT and
(Test Expression) SETSTA rule components

© Copyright 2012 to current year. 71 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.4 Database Views Editor

To help the user with the creation and modification of Database Views there is a Database Views Editor 
available within Lexicon module.

The Database Views Editor does not need any of the Database View administrative elements to be created
before allowing the user to create a Database View. It will automatically create an unnamed DBVWWL
(Database View World) element in the first available Dictionary database in the current MDB.

 All DBVWs created by the editor are created within same Database View World. If the administrator requires
the DBVWs to be in different DBVWWLs then they must first navigate to the relevant position in the
Dictionary Explorer and create the Database View manually using either the right mouse menu option, or the
Create menu option from the main menu.

7.4.1 Displaying the Database Views Editor

To display the Database Views Editor select


Display > Database Views Editor 

The Database Views Editor form is shown below:

 The User can undock the from the Lexicon MDI window by double clicking anywhere along the forms
title bar, to re-dock the form double click anywhere along the forms title

© Copyright 2012 to current year. 72 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

When the form is displayed, the user is presented with the current project‟s Database Views - listed in the
Views section of the form under the Views tab.

To change the type of Database Views that are listed the user selects the pull-down list in the View
Definition Set section of the form and selects one of the options available, i.e. Element Views. This will re-
populate the Views tabs list with all of available Database View s of the selected type.

The user can filter the list of views that they are presented with by
changing the Database Types Filter pull-down option. For
example, to display only the Views of elements that can exist
within an AVEVA E3D Design Database, the user would change
the Database Types Filter  pull-down to Design.

Within the Views tab list, a right click context menu has a number
of options. These include the ability to create New Views, create
new View Sets, as well as Deleting, Renaming and Copying
existing views.

If the View Definition Set is set to Project Views, because the Database Views Editor  is independent from
the Dictionary Explorer there is also an option Navigate to. This updates the Dictionary Explorer CE to the
selected Database View in the editor.

When a Database View is selected in the View tab list, it‟s General   and Basic  definition category field
information is displayed within the View Detail section of the form as shown below:

© Copyright 2012 to current year. 73 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Each of the tabs in the View Detail  section of the form allows the user to define the Database View‟s
contents. The editor helps the user to add, delete and modify the Database Views hierarchal elements in a
user-friendly way.

7.4.1.1 User Views


 As discussed earlier, User Views may be copies of Project or Element Views, or Views an Administrative
User has created and refined before exposing to all Users by copying it to a Project Dictionary Database as
a DBVW.

The difference between a User View and the other views discussed is that the defi nition is stored in a file on
the file system and is not stored in any of the AVEVA E3D databases. In addition, they can only be
accessed and modified using the Database Views Editor .

The Users Views are stored in a separate file for each project that the user has access too; these are, by
default, stored in the folder %E3DUSER%\<Project>\Data\Database Views   within a file called
DatabaseViews.xml .

 Additional User Views from different projects can be accessed by selecting the Open link button in the View
Definition Set section of the Database Views Editor  form. A windows open file form is displayed and may
be used to navigate the file system to the required DatabaseViews.xml file. On selecting the file, the Open
button is selected.

The database views are loaded into the Database Views Editor 
form, and a new option is available under the View Definition Set
pull-down called Unnamed Definitions.

The user can copy Database View definitions from the Unnamed Definitions list to the User View list for
use in the current project.

© Copyright 2012 to current year. 74 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Set the View Definition Set to display the Unnamed Definitions by


selecting the pull-down option.

This will list all of the Unnamed Definitions in the Views tab grid.

On selecting the required definition, the Copy  option is selected via


the right-mouse context menu.

The View Definition Set is changed to display the User Views by


selecting from the pull-down option.

This will list all the User Views in the Views tab grid.

 Anywhere within the Views tab grid, the right-mouse context menu
may be accessed and the Paste option selected.

The Definition is now available in the User Views list

To save the User Views, click the Save  button on the View
Definition Set toolbar.

To unload the Unnamed Definitions from the Database Views Editor , set the View Definition Set pull-
down option to Unnamed Definitions and click the Close link on the View Definitions Set toolbar.

User Views are created and modified in the same way as Project Views.

© Copyright 2012 to current year. 75 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.4.2 View Properties tab

On this tab, the user enters the descriptive details of the Database View. The information entered is stored
in the General and Basic definitions category fields of the DBVW as shown.

The information entered will help other users when they are searching for a view to use when they are
working within the other AVEVA E3D modules, i.e. reporting.

On this tab the user also selects the base Element types that the view will be based upon. These can be
manually entered in the text box, or by selecting the (…) ellipsis button. The Select element types form will
be shown.

The Attribute filters and Expression filters pull-down sections allow the user to set the selection criteria of
the selected Element types. When the user Adds or Deletes a filter they are actually creating and deleting
 ATTFIL and EXPFIL elements in the DBVW hierarchy.

To add either an Attribute filter or Expression filter, select the Add Filter   link within the appropriate pull-down
section to create a new empty row within the appropriate section. The user then enters the expression,
either by manually entering the values or using the pull-down lists that are available under the Attribute,
Operator  and Expression type columns.

To delete a filter select the row with the expression to be deleted and then select the Delete Filter  link.

© Copyright 2012 to current year. 76 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.4.3 Data Sources tab

On this tab the user defines the DBVW‟s creation SRCELE elements and CRERUL elements.

To create a SRCELE element, select the level that the item is to be created at in the tree-view and via the
right-click context menu select New SRCELEMENT .

Example of multiple SRCELE in a DBVW.

To delete a SRCELE element, select the SRCELE in the tree-view, and via the right-click context menu
select Delete. If the selected SRCELE owns other SRCELEs then these will be deleted as well, along with
any expressions or attributes that are local to it.

7.4.4 Columns tab

Here the user defines the columns of the view; each row in the grid is either an ATTCOL or EXPCOL.

This tab has a toolbar of available options and selection settings:

© Copyright 2012 to current year. 77 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

The pull-down menu lists all of the available SRCELE‟s that are defined in the current  Database View, when
a new row is added to the grid, the Data Source column is populated with the value that is selected in this
list, and makes the new columns local to the selected SRCELE.

The New link button will create a new row within the grid. The new row is appended to the bottom of the
grid. When a new row is created the user does not need to determine whether they are creating an ATTCOL
or EXPCOL; the system will determine this when the user enters the data into the rows cells.

 The system will change the DBVW hieratical element type automatically when a user changes the rows
contents.

The Delete link button will delete the selected row(s) in t he grid - to select multiple rows the Ctrl or Shift keys
need to be depressed on selection using the left mouse button.

The user can populate the grid with all of the selected view‟s Element types standard attributes by selecting
the Add Standard Attributes link button.

The Add Status Column link button will add a row to the grid with the Attribute/Expression cell pre-
populated with the Status Attribute. It will also navigate the cursor to the Qualifier  cell for the user to select
or manually type in the required value.

 The Qualifier cell will only have a list of STADEF’s if the Data Source Element type has a STADEF with
a matching Controllable Element.

The grid is a list of all the ATTCOL and EXPCOL columns that are required in the view of the Elements data.
The user can select from the populated lists the attributes to use, or type the expressions in to the cells. The
user is able to change the header text of the column in the Column Name column within the grid so that it is
more descriptive to the end user. It is also common that duplicate named attribute columns occur when
using SRCELE items, and this allows the administrator to define distinctive names.

  As per all of the grids used within the plant suite, the columns can be resized by dragging the column
headers, and sorted by clicking on the column headers

The grid allows the users to enter the Basic definition field values that are manually entered via the Current
Element Editor.

© Copyright 2012 to current year. 78 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

The columns in the grid map to the following ATTCOL and EXPCOL element fields:

Grid Column Name ATTCOL Elements fields EXPCOL Element fields

Data Source DBVW or DBVW SRCELE’s DBVW or DBVW SRCELE’s

Attribute/Expression  Attribute Expression

Column Name User-defined name User-defined name

Description Description Description

Type UDA type

Readonly Read only

Expression Expression type

Qualifier  Attribute Qualifier

7.4.5 Preview tab

This tab allows the user to see the resulting data that the database view will be populated with. However,
due to the Lexicon module not having access to any other database except the Dictionary Databases, only
views of dictionary data can be previewed within Lexicon . To preview the data in other modules, the user
has to create a report based on the Project Database View and run said report.

© Copyright 2012 to current year. 79 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.5 Creating a Branch and Pipe Database View – A Worked Example

Using the Database Views Editor  the user will create a Database View based on a 3D BRANCH element. It
will contain attributes that are local to the element and attributes from the owning PIPE.

Exit  AVEVA E3D and Re-Enter   the Training project  through the Lexicon  module using the details
provided by the Trainer, for example:

Project Training

Username SYSTEM

Password XXXXXX

MDB A-PIPING

Click the Login button.

If the Database Views Editor is not displayed, open it using the main menu option: Display > Database
Views Editor.

7.5.1 Creating the DBVW

Create new a Database View by selecting the Views tab and, using the right-click context menu, select the
option: New > View.

© Copyright 2012 to current year. 80 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

 A new DBVWW L and DBVW are created in the Dictionary Explorer , plus an empty definition within the
Database Views Editor form:

The DBVW is given a default Name in the Database Views Editor  in the format of Table<x> (where x is a
sequential number that is allocated to each view). To give the DBVW some properties, select the View
Properties tab.

Enter the details for the User-defined name and Description:

User-defined name: Branch Details

Description: Branch Details View

The View Properties tab should be updated as shown below; note that the Name of the view is now
displayed in the list of Views and has been given the values entered into the User-defined name field.

The Database View now needs to be associated with one or more Element types. The user can either enter
the Element types separated by spaces into the field or by clicking the (…) e llipsis button to display the
Select element types form.

© Copyright 2012 to current year. 81 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Click the … button and from the list of Available element types select the BRANCH element and click OK
to close the form. The Element types field will be populated with the elements selected on the form.

In this DBVW all of the items of the selected Element types will be returned to the view, therefore there is
no requirement for any Filters.

Because the DBVW was created in the Editor it only has a User-
defined name defined. If the user looks for the DBVW in the
Dictionary Explorer   it is named DBVW 1 beneath DBVWWL 1.
Where there are a number of views, this will become a problematic
administrative issue, so it is a good working practice at this stage
to give the DBVWWL and the DBVW identifiable names. For the
DBVW this is quite often the same name used as the User-
defined name.

Using the Dictionary Explorer  navigate to DBVWWL 1.

In the Current Element Editor   window, enter into the Name


field: DBVWWL-TRAINING.

Using the Dictionary Explorer  navigate to the DBVW 1.

In the Current Element Editor   window, enter into the Name


field: Branch_Details_View .

© Copyright 2012 to current year. 82 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.5.2 Defining the Data Sources

Select the Data Sources tab in the View Detail  section of the form. This will allow the user to see the
current Data Source; there should only be one listed i.e. the Database View. The entry is listed with the
Description  text entered in the previous step.

In this worked example the view will not use any SRCELE, so all the settings on the tab will be left as the
default values.

7.5.3 Defining the ATTCOL and EXPCOL columns

Next select the Columns tab in the View Detail section of the form to allow the user to add the required
columns to the Database View.

7.5.3.1 Defining Standard Attributes and UDA‟s (ATTCOL s)


On the Columns tabs toolbar, click the New link button to add an empty row to the grid.

 The Data Source column will be populated with the default Data Source from the previous step

Next the user enters either an Attribute name or an Expression in PML / XPATH format into the
Attribute/Expression  column cell. The cell has a pull-down li st, that when selected, will display an entire li st
of standard attribute and any UDA attributes for the selected Element type(s). If a PSEUDO attribute is
required then its name has to be entered into the cell in the same way an expression would be.

© Copyright 2012 to current year. 83 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

From the pull-down list, select t he NAME attribute.

This will enter the text NAME into the cell; notice that
the Description   and Type  have been automatically
populated from the information from the Dictionary
database for the NAME attribute.

On the Columns tabs toolbar, click the new link button to create another row, and from the pull-down list of
attributes in the Attribute/Expression  column select the attribute HBOR.

 Add another row and set the Attribute/Expression  column cell to the attribute HCON.

Now add four more rows and set the Attribute/Expression  columns cells to the attributes HREF, TBOR,
TCON and TREF respectively. The grid should be as follows:

7.5.3.2 Defining Pseudo Attributes (ATTCOLs)


The next three attributes that are to be added to the view are Pseudo attributes; these are defined by
manually entering the attribute names into the relevant columns cell.

 Add a new row and enter into the Attribute/Expression  column cell the text CLLENGTH.

Row 1: TULENGTH
 Add two more rows and enter the following into the each of the
rows Attribute/Expression  column cell respectively:
Row 2: BRWEIGHT

The grid should be as follows:

© Copyright 2012 to current year. 84 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

 At this point the user should perform a Save Work (Lexicon > Save Work).

7.5.3.3 Defining Expressions (EXPCOLs)

The next row in the view is to be an expression column; it will retrieve the Name of the Fluid that is
associated with the Spec of the Branch.

Create a new row and enter the following expression NAMN OF FLUREF OF PSPEC   into the
Attribute/Expression cell in the row.

Because an expression has been entered, the Description cell was not populated. So the end user knows
what the column is returning a meaningful description should be added. Enter Fluid  into the Description
cell.

The Type has been set to TEXT automatically; this is correct for the result of this expression as it will return
a string value. However, sometimes this may not be automatically set correctly and will have to be changed
to the relevant type. The Expression Syntax has been set to PML; once again the system attempts to set
the correct value but may require user alteration.

Create six more rows with the following values:


Expression
Data Source Attribute / Expression Description Type
Syntax
Branch Detail View NAMN OF PIPE Pipe TEXT PML
Branch Detail View :APPROVED OF PIPE Pipe Approval TEXT PML
Branch Detail View :CHECKED OF PIPE Pipe Checked TEXT PML
Branch Detail View :DESIGNED OF PIPE Pipe Designed TEXT PML
Branch Detail View TEMP OF PIPE Pipe Temperature REAL PML
Branch Detail View PRES OF PIPE Pipe Pressure REAL PML

 These expressions are a mixture of standard attributes and the UDA’s created earlier in this training
course.

© Copyright 2012 to current year. 85 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

The Columns grid should now be as follows:

Perform a Save Work at this point.

7.5.4 Testing the Database View

In order to check that the Database View is returning the correct information and because the Element type
was set to a 3D BRANCH, the view will only produce results within the AVEVA E3D Model module using a
Report.

Login in to the AVEVA E3D Model module,

Within the AVEVA E3D Model module, a pre-defined report is run by clicking on the Designer   button on the
Report  group within the Tools menu. This displays the Report Designer window.

 Refer to TM-1803 AVEVA E3D Reporting for further information on Reporting methodologies.
From the main toolbar, select File > Open… to open the Open Report dialog.

Using the Look in  option list on the Open Report


dialog select the option <Browse…>

This will open the Browser For Folder  dialog. Navigate to the folder:

C:\AVEVA\Plant\E3DTraining\Training\Reports

Click OK to close the dialog.

Select the report TM-1308_Lexicon_Database-Views_WorkedExample1_Report   from the list of Report


Definitions and click the Open button to open the report.

© Copyright 2012 to current year. 86 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

The report needs to be attached to the database view that has been created in the worked example. To do
this, click the Data source button on the Report toolbar to display the Data Source Wizard.

On the initial page of the wizard, select the Copy option then click Next >

On the next page of the wizard, select the View  with the Name Branch Details. This is the User-defined
name that was entered when the Database View was created in Lexicon , click Next >

The user will be prompted with the following


warning.

Click the Yes button.

On the next page of the wizard click Finish.

In the Field List tree-view expand the node called Branch Detail. The columns defined in the database
view are listed here and the user can observe how the Name  and Column Name  values of the database
view are used for distinguishing the field names that may be used within the report.

Click the Run Report button on the main toolbar to run the report.

Examine the resulting preview and check that the attribute data for Branches and Pipes is being returned.

Close the Run Report preview window and the Report Designer   window.

Now the user must switch back to the Lexicon  module.

© Copyright 2012 to current year. 87 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Exercise 6 –  Creating a Nozzle Database View

1. Create a Database View for Equipment Nozzles. Provide the Database View with the following
properties:

Name: Equipment_Nozzles

Description: Equipment and Nozzles

User-defined name: Equipment and Nozzles

2. Include the following attributes from the specified 3D Element types:

Nozzle (NOZZ) NAMN

DESC

CREF

CATR

P1 BORE

P1 CONN

POSITION IN SITE

P1 DIR IN SITE

TPRESS

PRESS

TEMP

Equipment (EQUI) NAMN

POSITION IN SITE

:DESIGNED

:CHECKED

:APPROVED

3. Test the Database view using the pre-defined report TM-1308_Lexicon-Exercise 6, (located in the
folder C:\AVEVA\Plant\Training12.1\Training\Reports ).

© Copyright 2012 to current year. 88 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.6 Modifying the Branch and Pipe DBVW using SRCELE – A Worked Example

 As discussed earlier, rather than creating expressions to navigate elements in the hierarchy to get to and
retrieve data, the source element ( SRCELE) can be used within the Database View to simplify navigation by
making other elements the source of data within the Database View.

Using the Database Views Editor   the user will create a copy of the previous Database View and use the
SRCELE to replace the expressions that extract data from the PIPE and FLUI elements as source elements
with the BRANCH element as the Base Element (Element type) of the database view.

7.6.1 Copying a Database View

If the Database Views Editor   is not displayed, open it using the main menu option: Display > Database
Views Editor.

Within the View Definitions Set   section, set the option to Project Views  and select the Branch Details
database view. Using the right-click context menu, select t he option Copy, followed by Paste.

 This has created a copy of the Database View created in the previous example.

Select the newly create Database View


in the list and using the right-click
context menu select the option Rename.

In the selected textbox enter the name


Branch Details 2.

Select the View Properties tab and set the User-defined name and the Description.

User-defined name: Branch Detail 2

Description: Branch Details with SRCELE View

Because the DBVW was copied in the Editor form it only has a User-defined name set - named
CopyOf/Branch_Details_View . It is advisable, at this stage, to give the copied DBVW a distinguishable
name

Navigate to the DBVW in the Dictionary Explorer .

© Copyright 2012 to current year. 89 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

In the Current Element Editor   window, enter


Branch_Details_View_2  into the Name field.

7.6.1.1 Selection using single SRCELE


Select the Data Sources tab and select the top item in the tree-view - DBVW Branch Details with SRCELE
View. Using the right-click context menu, select the option New SRCELEMENT .

This has created a Source Element under the database view, and made it the current element in the
Database Views Editor tree-view. The SRCELE needs to have its properties set to determine the AVEVA
E3D Element that is to be the source.

In the Properties section, the Description   describes the source element and an Expression in PML or
XPATH defines the Source Element AVEVA E3D type.

Description: Owning Pipe

Expression: PIPE

Expression type: PML

The Data Source should now be as follows:

The next step is to modify the database views columns to use the PIPE source element. Select the Columns
tab.

 Now that there are two source element’s


defined within the view, under the Data Source
column, there is a pull-down menu that can be
used to set the appropriate source element for
the Attribute / Expression

In the current database view the following rows have been defined with expressions that navigate to the
PIPE element to get the attribute values:

 NAMN OF PIPE

 :APPROVED OF PIPE

 :CHECKED OF PIPE

 :DESIGNED OF PIPE

 TEMP OF PIPE

 PRES OF PIPE

© Copyright 2012 to current year. 90 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Select the Data Source cell of the row that contains the expression NAMN OF PIPE and using the pull-down
option change the Data Source from Branch Details with SRCELE View  to Owning PIPE.

Due to the Source Element now being defined as the Owning PIPE, the Attribute/Expression cell of the row
can now be replaced with the attribute.

Replace the Attribute/Expression of NAMN OF PIPE by typing in the attribute NAMN as shown

 Now that the cell is an Attribute, the Expression Syntax that was set to PML has been unset, and the
Type cannot be changed as it is being set by the attributes database definition.

When the Database View columns are shown as fields in the Report Designer, the field will be listed by the
 Attribute‟s name. This is because attributes are listed by their Name but, expressions are listed by the
Description set in the Database View. To make a Data Source‟s attribute distinguishable from the Base
Element‟s attribute in the Report Designer fields list, the User enters a text string into the Column Name cell
within the Database View.

To make the PIPE‟s NAMN field easily recognisable, select the Column Name cell of the row and enter the
text Pipe Name. The row should now be as follows:

The remaining PIPE expressions need to be modified in a similar way, as the NAMN expression that has
 just been changed. Repeat the previous steps so that the Database View looks like this:

7.6.1.2 Selection using Nested SRCELEs


The expression that selects the Name of the Fluid Reference of the Pipe Spec of the Branch, NAMN OF
FLUREF OF PSPEC can be derived using Source Elements rather than via an Expression.

Getting to the NAMN of the FLUREF from the BRANCH requires two navigational jumps across AVEVA E3D
Elements. As shown below, the PSPEC points to a SPEC element that has a FLUREF attribute which, in
turn points to a FLUI element that has a NAME attribute.

© Copyright 2012 to current year. 91 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

BRANCH

PSPEC SPEC

FLUREF FLUI

NAMN

Using nested SRCELE‟s the same navigation and attribute can be retrieved. The following steps will take the
user through the creation and definition of Nested SRCELE‟s.

Select the Data Sources tab and in the tree-view select the node named DBVW Branch Details with
SRCELE View.

Using the right-click context menu select t he option New SRCELEMENT .

 A child SRCELE (Source Element) has been created under the tree-view. The SRCELE needs to have its
properties set to determine the source AVEVA E3D Element.

In the tree-view of the editor, ensure the newly created SRCELE is the CE and the Properties as shown:

Description: Branch Specification

Expression:  PSPEC

Expression type: PML

The Data Sources tab should now be as follows:

Now make the SRCELE Branch Specification   node in the tree-view the current selection and using the
right-click context menu select the option New SRCELEMENT . This will create another SRCELE, but this
time it is created under the previously created SRCELE.

Making sure that the newly created SRCELE is the current element in the tree-view, set its Properties as
shown:

Description: Specification Fluid / Medium

Expression:  FLUREF

Expression type: PML

The Data Sources tab should now be as follows:

© Copyright 2012 to current year. 92 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

The next step is to modify the Database View column that navigates and returns the Fluid Name, to use the
nested SRCELE source element. To achieve this, select the Columns tab in the editor to view the columns.

Select the row that has the Attribute/Expression cell set to NAMN OF FLUREF OF PSPE C, and change the
Data Source cell value to Specification Fluid / Medium from the pull-down list.

Replace the Attribute/Expression cell value by entering the attribute name NAMN; as before, the Column
Name should be changed to make the field easily recognisable. Enter Fluid Name into the cell.

The final database views columns should now be defined as shown below:

The user performs a Save Work at this point.

7.6.2 Testing the Database View

In order to check that the Database View is returning the correct information and because the Element type
was set to a 3D BRANCH, the view will only produce results within the AVEVA E3D Model module using a
Report.

Login in to the AVEVA E3D Model module,

Within the AVEVA E3D Model module, a pre-defined report is run by clicking on the Designer   button on the
Report  group within the Tools menu. This displays the Report Designer window.

 Refer to TM-1803 AVEVA Everything3D Reporting for further information on Reporting methodologies.

Using the Look in option list on the Open Report


dialog, select the option <Browse…>

© Copyright 2012 to current year. 93 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

This will open the Browser For Folder   dialog. Navigate to


the folder:

C:\AVEVA\Plant\E3DTraining\Training\Reports

Click the OK button to close the dialog.

Select the report TM-1308_Lexicon_Database-Views_WorkedExample2_Report , from the list of Report


Definitions and click the Open button.

The report needs to be attached to the database view that has been created in the worked example. To do
this, click the Data source button on the toolbar to display the Data Source Wizard.

On the initial page of the wizard, select the Copy option and click Next >.

On the next page of the wizard, select the View with the Name Branch Details 2, and click Next >.

The user will be prompted with the following


warning.

Click the Yes button.

On the next page of the wizard click Finish.

In the Field List tree-view, expand the node called Branch Detail 2. The columns defined in the database
view are listed here, and the user is able to see how the Name and Column Name values of the database
view are used for distinguishing the field names used within the report.

Click the Run Report button on the main toolbar to run the report.

Examine the resulting report preview and check that the attribute data for Branches and Pipes is being
returned.

Close the Run Report preview window, and the Report Designer   window.

Now the user must switch back to the Lexicon  module.

© Copyright 2012 to current year. 94 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Exercise 7 –  Modifying the Nozzle Database View

Using the previous Chapter as a guide, complete the following tasks:

1. Modify the Database View created in Exercise 6, and replace the direct attribute associations with a
SRCELE where appropriate.

2. Add a filter to the database view that returns only named nozzles.

3. Add a filter to return only the nozzles of Equipment in the Site /SITE-EQUIPMENT-AREA01.

4. Test the Database view using the pre-defined report TM-1308_Lexicon-Exercise 7, which can be
found in the folder C:\AVEVA\Plant\E3DTraining\Training\Reports

© Copyright 2012 to current year. 95 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

7.7 Using Database Views for Lexicon Administration – A Worked Example

In addition to using database views for the basis of reports, the administrator can also use them to help
maintain the AVEVA E3D system. The views can be used to find unset values on elements, both in the
 AVEVA E3D Model and Drafting modules plus the administration modules.

Using the Database Views Editor , the user creates a new database view that returns all the UDAs
complete with the Reporter Text and their Descriptions.

If the Database Views Editor is not displayed, open it using the main menu option: Display > Database
Views Editor.

Change the View Definition Set pull-down list to display the option User Views.

In the Views list, using the right-click context menu, select the option New > View  to create an empty
Database View.

The DBVW is given a default Name in the Database Views Editor . Give the DBVW properties by selecting
the View Properties tab, and in the view properties set the User-defined name, Description  and Element
types.

User-defined name ALL RPTX and DESCR

Description All Report Text and Description


Text

Element types  UDA

The next step is to define the columns (attribute fields) to display in the database view. Select the Columns
tab and create new rows. Enter the following in to the Attributes/Expressions cells of the rows:

Row1 NAMN

Row2 OWNER

Row3 RPTX

Row4 DESC

Because the data being viewed is available within the Lexicon module, the user can select t he Preview tab
to see the resulting populated database view.

The preview is shown on the following page.

© Copyright 2012 to current year. 96 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

To ensure the returned information is more selective, the user could apply an Attribute or Expression Filter
to the database view definition.

To make the view only return the User- Defined Attributes that where created earlier in the training guide,
select the View Properties tab.

Expand the Expression filters section and click the Add Filter  link.

Within the Expression  cell, enter the expression NAMN OF UWRL eq 'UWRL-PROJECT/DICT' , and set
the Expression type cell to PML

© Copyright 2012 to current year. 97 www.aveva.com


 AVEVA Everything3D (1.1)
Lexicon TM-1862

Return to the Preview tab and observe the change.

© Copyright 2012 to current year. 98 www.aveva.com

S-ar putea să vă placă și