Documente Academic
Documente Profesional
Documente Cultură
NetAXS®
Cloud Hosted Access Control
NetAXS is now integrated with MAXPRO® Cloud. MAXPRO Cloud is a fully
integrated Access Control and Video Security as a service platform. Ideal
for small to medium businesses MAXPRO Cloud makes single or multi-site
building security simple and scalable. Users can manage their security system
from anywhere at any time via any standard web browser or our innovative
award winning app.
Our cloud ready NetAXS-123 panel makes installation easy with plug and play
connectivity, auto registration of doors and readers and no expensive servers
or site software to install, reducing creation costs and installation time.
• Secure cloud based • Access from anywhere • Automated and • Manage user • Map based
managed access via standard web Scheduled reporting credentials across configuration and
browser large scale management
• Plug and play cloud • Easy to install and cost
deployments
ready access control • Multi-site management effective • Easy video integration
panels via app for iOS and • Remote configuration with associated
• Fully scalable
Android™ reduces truck rolls cameras and doors
• Multi-site access architecture with
deployments made • Lock and unlock doors distributed gateway • Remote firmware
easy with cloud based from anywhere deployment updates
configuration and
management
• Customizable Dashboards
• Google Maps Based Overlay
• Reports/Scheduler
• Integrated Access Control and Video Viewer
• Dynamic Floor Plans
• Real-time Alarm/Event Monitoring
2
NetAXS® Cloud Hosted Access Control
Q U I C K R E F E R E N C E G U I D E : N E TA X S -1 2 3
•U
niversal input
(100-240 VAC)
Built-in Tamper Switch
•3
.5 A available to power
PoE or 12 VDC Powered accessories – over 1 A 12V Battery Backup
to power each door
Terminal Block with Input Fuse
NX1P NX1MPS
1 Door Compact 1 Door Standard
NXD2 OP30HONS OP90HONS
Plastic Enclosure Metal Enclosure 2 Door Add-on Board Mullion Mount Vandal Resistant
NetAXS WEB-BASED ACCESS CONTROL NetAXS WEB-BASED ACCESS CONTROL: READER KITS RECOMMENDED ACCESSORIES
3
NetAXS® Cloud Hosted Access Control
SYSTEM OVERVIE W
1 DOOR
Typical PoE Configuration PoE Switch
Compact Plastic Enclosure LAN/WAN
Internet
CAT5 or
CAT6 MAXPRO Cloud
1
Cable User Interface and Mobile App
3
Exit Device
Typical Connections
Contact
2
Reader Reader
2
Strike
2 DOORS
1 Door Standard
Ethernet
Metal Enclosure 4 LAN/WAN
Connectivity
shown with 1-Door Internet
Add-on Board
MAXPRO Cloud
1
User Interface and Mobile App
1-Door
5, 6
4 A, 12 VDC Add-on Board
Power (NXD1)
Supply
Battery
Contact
Strike
2
Reader
4
NetAXS® Cloud Hosted Access Control
SYSTEM OVERVIE W
3 DOORS
1 Door Standard
Ethernet
Metal Enclosure Connectivity
4 LAN/WAN
shown with 2-Door Internet
Add-on Board
MAXPRO Cloud
1
User Interface and Mobile App
2-Door
7
4 A, 12 VDC Add-on Board
Power (NXD2)
Supply
Battery
Contact
Strike
2
Reader
M U LT I - S I T E A C C E S S C O N T R O L – S I M P L I F I E D
>3 DOORS Ethernet
Connectivity
2 LAN/WAN
Each panel is configured as a gateway Internet
Scalable Architecture
RS-485
Registration is plug panel loop
and play
MAXPRO Cloud
1
User Interface and Mobile App
Multisite Configuration and Management Simplified 8
4 A, 12 VDC NetAXS-123
• Configure and manage multi-sitePower
panels and readers 1, 2 or 3 doors
Supply
• Manage user credentials
Battery MAXPRO® Cloud
• Manage schedules
• Add and delete cards RS485 multi-drop (up to 30 panels)
2 2 2
Reader Reader
2
Reader 2
Reader Reader 2
Reader
Strike Strike Strike
NX1P NX1MPS
1, 2 or 3 DOOR Controller
READERS/DOORS
1, 2
Door/Reader Capability 1 DOOR Controller
(NXD1 or NXD2 add-on board is required for 2nd or 3rd door)
Dual Reader Control Capability
YES3 – IN and OUT reader capability per door (readers must have HOLD line capability)
(IN/OUT Reader per Door)
Two SPDT relays (jumper selectable NO or NC contacts) per door rated at 3 A @ 28 VDC
Number of Outputs
Two open collector outputs (OC) (16 ma, 12 VDC): reader LED (Aux) and reader buzzer (Aux) per door are available.
OUTPUTS
Relay Power Source Selectable: +12 VDC self-powered - OR - 0 to 28 VDC externally supplied source
Controller has a total of six configurable four-state supervised input points. (Factory default settings are Status, REX,
Number of Inputs
Reader Tamper A, Reader Tamper B, Power Fail and General Input)
Unit Input Power over Ethernet (PoE) 802.3af or external 12 VDC supply 93 VAC to 264 VAC, 50/60 Hz input provides 12 VDC, 4 A output
POWER INPUT
Control Board Power Input Power over Ethernet (PoE) or +12 VDC +12 VDC from included power supply
POWER OUTPUT
Power for Reader(s) and Input Devices 450 mA, 12 VDC is available to power strike, reader(s) and
1.15 A per door for locks/strikes, readers and input devices
input devices when using PoE
(3.5 A @ 12 VDC total)
Power for Locks/Strikes If higher current is needed, power by external 12 VDC supply
NX1P NX1MPS
LEDs
Status LEDs 12 LEDs total (12V power, PoE, over current, Ethernet, reader(s), door state, run, relay status)
COMMS
MAXPRO Cloud
HOST
Card only, card and PIN, card or PIN, PIN only, lockdown, disabled, supervisor, escort, limited use card, expire on date,
Door Control Modes
first card rule, snow day rule, time zone toggle, anti-passback, duress3
DOOR CONTROL
Local and global capability, hard and soft implementation NetAXS-123 allows anti-passback using
Anti-Passback Capability
In and Out readers per door (local and global)3
Card and Event Buffer Capacity 10,000 card capacity, 25,000 event capacity
Holidays 2553
Default Card Formats 8 Default Card Formats Supported (Additional Card Formats can be enrolled at the panel)
POWER
Yes
Universal Power Supply Input Power over Ethernet (PoE) 802.3af
93-264 VAC, 50/60 Hz input
7
NetAXS® Cloud Hosted Access Control
S P E C I F I C AT I O N S A N D F E AT U R E S
NetAXS-123
NX1P NX1MPS
Card Reports
Reports
Audit Reports
Export pdf and excel formats
Dashboard View
1. A second door may be added with a NXD1 add-on board however, PoE power restrictions apply 4. An external UPS is required to power the PoE power source for battery backup.
(see footnote 2). 5. USB port for setup and troubleshooting.
2. 450 mA, 12 VDC is maximum current available to power strike, reader(s) and input devices when using a 6. Software compatibility for NetAXS
802.3af PoE connection. If unit is externally powered, higher current is available.
a) MAXPRO Cloud only supports NetAXS-123 configured as a gateway.
3. When using MAXPRO Cloud, this feature may have limitations or not exist.