Documente Academic
Documente Profesional
Documente Cultură
Figure 2.6
ESc201A Home Assignment 2 Aug. 11, 2019.
7. The switch in fig. 2.7 has been open for a long time. At t = 0 the switch closes. Find the
+
inductor voltage vL(t) for all t ≥ 0 .
8. For the 2F capacitor circuit, shown in fig. 2.8, the switch has been closed for a long time. The
capacitor is rated for a maximum voltage of 1.5kV, after which the dielectric breaks down and
shorts it. If the switch opens at time t = 0, then at what time does the capacitor reach the
dielectric breakdown voltage?
10 t=0 1k
10 +i
o t=0
4mA 5 8.6mH vL(t)4 4io 1mA 5io 5k 2F io 4k 1mA
Figure 2.7 Figure 2.8
9. The voltage waveform in Fig. 9(a) is applied to the circuit in Fig. 9(b). If the initial voltage on the
capacitor is zero, (a) Calculate vo(t), and (b) Sketch vo(t) versus t.
Vs
Vs
+ + + 20k +
50V 0.01F 100V
Vs Vo Vs Vo
400k 40mH
0 1ms t 0 2s t
Figure 2.9(a) Figure 2.9(b) Figure 2.10(a) Figure
2.10(b)
10. The voltage waveform shown in Fig. 10(a) is applied to the circuit of Fig. 10(b). If the initial current in
the inductor is zero, then (i) calculate vo(t) and (ii) sketch vo(t) versus t.