Documente Academic
Documente Profesional
Documente Cultură
BASIC FEATURES
Selective call facility from Controller to 80 Way Station Telephones
Five Group call and General call (ALL CALL) facility from Controller (CRE&TRE)
Commonly available EPBT (2W Telephone) is used as Control Telephone
Much louder telephone ring at Way Stations with proper RBT
Single push button operation from CRE for calling Way station Telephones
Call facility from CRE and TRE to Way Stations and Local Telephones
LED and Alphanumeric LCD display to facilitate different operations
Different Ring tones for Station call, Group call and General call
Clear indication for Way station Tel status – ringing, busy or disconnected
4 Telephones can be connected to a Way Station Equipment; all 4 telephone for
one CNL or 2 telephone each for two CNL circuits
Low cost of cabling – only a single cable pair for each telephone
Way Station Equipment is mounted on OFC equipment rack and works from
48VDC ; consumes less than15 Watt
No need of individual 12V PSU at ASM room for way station equipments
Intercom facility between Way Station telephones with automatic priority to
accept calls from controller
Provision for intercom facility from one station to another
Cordless telephone may be used as control telephone for ASM’s convenience
SYSTEM SEGMENTS:
Ringing pattern of the way station telephone is different for different types of
call (Selective, Group or General call) and appropriate RBT is sent back to the
controller.
All the 4 telephones connected to the MTWE can be dedicated to one control
circuit or if necessary, the MTWE can be configured for two control circuits
with 2 telephones for each control circuit. Intercom facility is provided
between a pair of telephones without any disturbance to the controller.