Documente Academic
Documente Profesional
Documente Cultură
DRAWING DESIGNATION
Rev. No. 00
REV CHKD.
PREP. BY DATE DATE APPD. BY DATE
NO. BY
00 KUL 05/04/2018 MRM 05/04/2018 SWA 05/04/2018
Table of Contents
1.0 General....................................................................................................................3
2.0 Drawing Numbering Convention...........................................................................3
3.0 Details of First Barrel..............................................................................................3
4.0 Details of Second Barrel..........................................................................................4
5.0 Details of Third Barrel............................................................................................4
6.0 Details of Fourth Barrel...........................................................................................9
1.0 General
Component
ds Class
Product
ds Group
Product Code
The first barrel describes the product group and any new product can be added in
future revisions based on requirements. All the Repairs/Spares/Renovation &
Modernization (R&M) activities shall start with a product Code ‘R’ followed by
respective product as listed in below table.
SST-XX-XX-XXXX
Product Group Code Description
SST Sreem Serba Turbines
The second barrel describes the drawing sheet size, standard sizes being (A0, A1,
A2, A3, & A4). The drawing number shall be in accordance with the drawing sheet
size. Any other sizes apart from mentioned, can be added in future revisions, based
on requirement.
SST-XX-XX-XXXX
Sr.No. Description
00 A0 Sheet (standard size)
01 A1 Sheet (standard size)
02 A2 Sheet (standard size)
03 A3 Sheet (standard size)
04 A4 Sheet (standard size)
The third barrel describes the product subassemblies for easy identification of the
drawing component. Below table lists the different product subassemblies with
empty fields intentionally left for future usage. Any new product subassemblies can
be added in future revisions. The product groups (as listed below) shall be defined
for each Product Code.
Sr. No Description
00
01 EMERGENCY STOP VALVE
02
03
04
05 HP CASING ASSEMBLY
06 DIAPHRAGMS ASSEMBLY
07 MACHINING
08 ROTOR ASSEMBLY
09 STEAM GLAND ASSEMBLY
BOPE
50 GA OF TG LAYOUT
51 LS COUPLING
52 GENERATOR & AUXIALIRIES
53 INSTRUMENTATION & HOOKUP ITEM
54 TURBINE CONTROL PANEL
55 ACB Drawings
56
57
58
59
60 P&ID-CONDENSATE SYSTEM
61
62
63 P&ID-COOLING WATER SYSTEM
64 P&ID-LUBE OIL SYSTEM
65
66
67
68
69
70 P&ID-LUBE OIL SYSTEM
OTHERS
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90 COMMISSIONING SPARES(Internal Reference)
91 OPERATIONAL SPARES
92 DISPATCH SCHDULE
93 ERECTION & COMMISSIOING DOCUMENTATION
94
95 R&M
96
97
98
99
The first letter of fourth barrel represents the product class for identification of the
production status like, casting, forging, fabricated component or bought out
component etc. Additional product classes can be created in future revisions based
on the requirement.
SST-XX-XX-XXXX
SST-XX-XX-XXXX
The letters from 2nd to 4th of fourth barrel represents the drawing serial number with
respect to drawing sheet size. The number created shall be in sequence to the latest
available drawing number under each drawing size, irrespective of product
group/class.