Documente Academic
Documente Profesional
Documente Cultură
1. INFINITI:FY-3286J,FY-3266T,FY-3208R,FY-3208H,FY-3266J,FY-3278N,FY-3208HF,FY-
3206H,FY-3206HF,FY-3208G,FY-3206G, FY-3278F,FY-3208F, FY-3278Q,FY-3208Q,FY-
UV2508S/2508GS/UV3008L/2508L above are all the INFINITI Seiko series printers.
2. Also for all the Challenger printers with Seiko spt print heads. And the sub series like
printers, Models like: UD-3278D,UD-3266E,UD-3206E,UD-3208E,UD-3276E,UD-3286E, UD-
3266Q,UD-3206Q,UD-3208Q,UD-3276Q,UD-3286Q,UD-3266P,UD-3206P,UD-3208P,UD-
3276P Kindly note Infiniti, Phaeton and Challenger are from one same factory actually but
belong to different sub-lines trademark and marketing departments.
4, All the ZY Seiko spt inkjet printers seriesZY-6800,ZY-5300 (final model like ZY-
SK5306,SK5308,SK5312),ZY-3400,ZY-3200 (final model like ZY-
SK3206,SK3204,SK3208,SK3212 etc.),ZY-2500 (ZY-SK2504,SK2506,SK2508,SK2512),ZY-
2000,ZY-FB Series ,ZY-UVB,ZY-UVC,ZY-UVA with spt heads.
5,All the Gongzheng printer with spt heads.Models:GZF3206S,GZHS 3204DS / GZK 3206 AS
/ 3208 AS
6,Icontek
Printer like D1,D3,D5,D7,X1,X3,M1,M3,M5,M7,3308FZ,3308HZ,3306FZ,33HA,33FA,
Other models:TW-5308FZ/TW-3306FD/TW-3308FD/TW-3306FZ//TW-3308FZ/TW3306HB
/TW-3308HB/TW-3306FB/TW-1800F3/TW-3308FB/TW-3306FA TW-3300FB/TW-3300FZ,
TW-3200F3/2600F3,
User’s Guide
Mannual for general large format printer with Seiko spt510 printheads made in China
Read this user’s guide to use the printer safely and properly, keep this manual in a place where you
can quickly access it at any time.
Preface
It is really our honor to be your supplier. In order to let our customers, manage this system ASAP,
we especially compile this operating manual in an all-round and incisive way. You can get the
knowledge of the machine configuration, hardware connection, equipment structure and the
operating instructions etc. We strongly suggest you to read this manual carefully before you using
your printer.
In order to compile the correct and dependable guides, we do our best to avoid the human error.
If you find any error or something not clear enough, please contact us.
In coming future, for enhancing the equipment’s performance and reliability. The manual is
subject to change without notice.
Any problem or inquiry, please feel free to contact us through the following
general company reserves the right to make changes without notice to the specifications and
materials contained herein and shall not be responsible for any damages (including consequential)
caused by reliance on the materials presented, including but not limited to typographical,
arithmetic, or listing errors.
E-mail:lnzy2000@sina.com
This equipment has been tested and found to comply with the limits for a Class A digital device.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Introduction
Thank you very much for purchasing the Color Inkjet Printer (simply called the printer below).
This printer is a color inkjet printer that adopts solvent ink, supports 3.2m media width, and builts-
in USB 2.0 interface.
This manual, the User's Guide, describes the features of the printer, names of components,
information to be known before use, and basic operations, such as how to turn the power on and
off and set media and ink.
The following items should be read before reading Section 1.
- Safety precautions
- Handling precautions
Read these items to use the printer safely and properly. Keep this manual in a place where
you can quickly access it at any time.
Contents
Section One Safety Precautions
1. Cautions
2. Operation Notice
4. Consumables
1. Environmental conditions
6. Heater
1. Part names
2. Main accessories
7. Continuous-printing function
10. Mainboard
The following symbols are used in this manual to ensure the proper use of the printer and to
prevent the printer from being damaged.
Example of symbols:
symbol denotes items that require special care while executing a certain procedure or
operation.
Use the power supply voltage specified on the nameplate. DO NOT plug
several devices into one electrical outlet as this might result in fire or electric
shock.
Make sure the printer is well grounded. If not, a short circuit may cause fire
or electrical shock.
NEVER use the printer in a place of extreme humidity or any place where it
can possibly be splashed by any liquids. If any liquids get into the printer, it
could lead to fire, electric shock, or other serious accidents.
DO NOT remove the covers attached to the printer because they contain
high-voltage and extremely hot parts. Careless removal might result in an
electric shock or burn.
DO NOT allow metal or liquids to touch the internal parts of the printer.
Doing so may cause fire, electric shock, or other accidents.
DO NOT disconnect or connect the power cable with wet hands. Doing so
may lead to electric shock. Turn the printer off and unplug the power cable
immediately after it thundered. 。
Turn the printer off and unplug the power cable immediately after it
thundered
Power OFF the printer and unplug the power cable from the power
outlet in any of the following cases:
Only use the power supply according to the label. You may choose
either AC 110V or 220V for different countries and regions.
Don’t use your hand to move print head; otherwise the printer will
be damaged.
Always use power switch to turn On/off the printer. Before shutting
down the Printer, do not pull out Power Supply wire or Data Wire.
The ink used for the device contains organic solvent. Therefore,
observe the local rules strictly related to organic solvent stuff.
The ink used for the device contains organic solvent , Since the ink
is flammable, never use fire when using the device.
Do not swallow ink or avoid its splashes on the eye. If it gets into
the eye, wash it off with a clean running water and consult a doctor
as required. If it is swallowed, do not try to vomit it forcefully, but
cunsult a doctor.
Handle the paper rolls with care because they are very
heavy. If you drop them, it could lead to personal
injury.
In order to ensure the safe operation of the printer heed all of the cautions and warnings contained throughout
this manual.
Handling Precautions
Power Supply
2. Do not provide power to the printer through the same power line as for noise-generating
devices, such as a motor.
3. Use the power supply matched with the specification of the printer.
4. Connect the power cable to an electrical outlet. Do not plug several devices into one electrical
outlet.
printer.
1.Do not place anything on top of the printer. Do not rest your elbows on the printer.
2. Open and close the top cover gently from the front of the printer
3. Before connecting or disconnecting the interface connector, turn the printer off.
4. Do not clean the surface of the cover with benzene or paint thinner. The coating may come off
or deteriorate. Wipe the cover clean with a soft cloth. If the cover is very dirty, use a cloth
moistened with a neutral detergent.
The following regular inspection and maintenance must be performed in terms of characteristics
of solvent ink.
3. Cleaning the printhead every month on poweroff, using the original solution. Keep in mind not
using the water to cleaning the pipe or printhead, if so, the equipment will be totally damaged.
Normal cleaning should be done each week if the printer is not used for
a long period.
If left without being cleaned, the ink in the head nozzles with harden and the head
may be damaged.
fan or air conditioner should not blow directly onto the machine. Air flow from fan or Air
conditioner might dry the ink in the head nozzles causing clogging that affects ink jetting and you
will not be able to obtain satisfactory printing results.
Before printing, in order to avoid the scratching of the print head, please check the media
situation. Always Printing the test line before doing printing job, check the print head condition
and clean it on time. Obtain the professional training before operating the equipment.
Inkjet media
1. The recommended consumables (printing materials, ink, etc.) are required to be used all the
time. Otherwise, it may affect the printing quality or the printer may collapse.
2. The outdate ink is abandoned or it will lead the printer not to work.
3. Dusted ink tank should be put in plastic bags and dealt with industrial waste. Please refer to the
related legal provisions about the processing of dusted ink tank.
4. Keep ink away from your skin or clothes. If stained with skin, please wash it clean with soap
water immediately.
5. Please check the base plate of waste ink regularly in case the waste ink leak out.
6.The smooth paper should be layed out when installing and taking out the waste ink base plate in
case of the sprayed ink sticking to the floor or the skin.
7. The ink should be stored in shade places. It is forbidden to store the ink in places with high
temperatures or sunlight. Otherwise, the ink character will change.
This chapter describes the essential information needed to operate the printer. Please get familiar
with this basic knowledge before reading chapter 2 and the following chapters.
* working conditions
* environments
* installment of machine
Working conditions
installed space
Enough space needed around the printer to change the spare parts used frequently, take out the
graph paper and ventilation. Furthermore, spare space should be reserved to maintain so that you
can mend the printer or change the spare parts.
Printer be placed on flat, stable places which is bigger than printer. If the printer sloped or
some angles, then it cannot work normally.
Places which have sharp changes with temperature and humidity should be avoided. The
printer should be free from sunlight, strong light and direct shining of heat resources.
Enough spaces reserved around the printer to ensure the normal ventilation.
printer be placed near to the socket on the wall so the plug be inserted or taken out easily.
Environment conditions
Tips
-Please operate the machine between 20 and 30 degrees so as to get better printing quality.
- Warming-up devices be used when working temperatures below 20 degrees to ensure the better
printing quality.
Attention
-The printing quality may also decline when operating the machine beyond the temperature and
humidity range.
tips
- The printer and the computer connect with the same ground wire to avoid the circulation of
electrical circuits to bring interferences.
- Computer power be independent and connected with the front side of the printer power. The
intervals should be above 10 M to avoid the electrical shock and the fluctuation of voltage
frequency to affect the normal working of computers then computer crashed. Noise filters with
220V, 10A be installed in front of the power to remove the interference noise of power.
Recommended configuration for the computer hardware and software which are related to the
machine
hardware
system
Notice
Please connect the computer with the ground wire or the printing quality be affected greatly due
to the computer electrostatic influence.
- unstable places
Printer installment
2. Put the ink bottle on the main ink tank frames of the right side and connect every ink hole of
each ink pipe of each ink bottle properly.
pic3-1
4. Install the print heads on the corresponding position on the print head frames.
pic3-3
Print head installment
1.All the signals and power line be connected properly.
2. Installing the operating software and the rip software in the computer
Notice
1. In order to clean and maintain the print heads, please prepare
a) 50 ml glass injector
b) Special cleaning solution
c) Several pieces of non-woven fabrics
2. specifications to operate the computer
To avoid the problems brought by computer so better configuration computer and
famous brand computer be recommended.
connections of the printer
Mode of connection is USB 2.0 connection, connect the USB hold with computer
connection by USB cable line. The driving procedure of USB will finish
automatically when installing the operating software.
connect the power
Notice, make sure to use the cleaning solution to clean the whole ink pipe,
filters and sub-ink bottle before installing the print heads to avoid the dirts
in the bottle may block the print heads.
1. Fix it in the workshop after installing all the hard wares and clean the foam
packing paper inside, glues, etc. Special attentions needed.
2.Connect the power line include the printer power line, power line for heating
and printer data cable line.
3. Press the power button after finishing all the preparations. Meanwhile, the
automatically ink supplying system will be start. The ink of the main ink tank
will flow to the sub ink bottle through the filters with the help of ink pump.
4.Loading media. Printer be on. Press the button to clean the ink and the air
inside the print heads. Then have a printing test to observe the conditions of the
print head spraying ink. If unsatisfactory, the operation of cleaning the print
heads can be went on.
Attentions of printing materials
notice for storing printing materials
- Before or after opening package, straight sunlight or water both need to be
avoided. They should be kept in dry and cool places.
- Sharp changes in temperature or humidity should be avoided. Printing materials
be saved in conditions without condensations.
-do not put the printing material upstand in order to avoid to make the printing
materials in a mess or destroy the edge of the materials.
-Do not stack the printing materials。
notice about processing printing materials
-To process the printing materials according to the actual conditions. If related
restrictions in the regulations, please refer to the regulations.
-After opening the package, sharp change of temperature and humidity should be
avoided. Printing materials should be put in working environment above 3 hours
and then lay them on the printers, Air-conditioner should be open when using in
case of the change of the temperature and the humidity.
- According to the properties of printing materials, it is easy to be curled with low
humidity and wrinkles maybe produced with high humidity. It is best to use the
printing materials in normal temperature and humidity (about 23 degrees and
50% RH)
- The materials which are broken, wrinkled, curled or stuck with dusts are not
recommended to use. Furthermore, don’t have the printing materials drop out or
get wet. Or else, this may affect the printing quality greatly or lead the printer to
break down.
- The edge of the printing materials is required to hold in case of touching the
surface of the printing materials. If the printing materials stained with oil or
sweat, this may have a negative effect on the printing quality.
-The untidy printing materials should be settled in rolls before printing.
-The ink is forbidden to put near the open fire. Or this may lead to a fire
disaster.
- Don’t swallow ink and need to avoid the ink sprayed in the eyes. If ink
spraying in the eyes and you need to use the clean running water to wash. And
ask for help of a doctor if necessary. If swallowing the ink, don’t make to throw
up forcefully buy you need to see a doctor.
-禁止将墨水靠近明火。否则,可能导致火灾。
- When the waste ink bottle is installed or removed, hold it with both hands
with its mouth facing up. If not, waste ink may spill from the bottle.
Heater
The printer builts in three heaters for fixing and stabilizing print image on the
print media.