Documente Academic
Documente Profesional
Documente Cultură
MEMBERS
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
From the figure, an angular section 100 mm x 75 mm x 6.25 mm is riveted by a 19 mm
diameter rivets arranged as indicated. Assume A36 steel. Diameter of hole is 3 mm greater
than the rivet diameter.
1. Determine the capacity of the section based on the yielding gross area.
2. Determine the capacity of the section based on tensile fracture of the net area.
3. Determine the capacity of the section based on block shear failure.
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag
ME33 : Fluid Flow 3 Chapter 11: Flow over bodies; lift and drag