Sunteți pe pagina 1din 3

HSR520 THRU HSR5200

Reverse Voltage -20 to 200Volts


Forward Current -5.0 Ampere
Schottky Barrier Rectifier
Features DO-201AD
·The plastic package carries Underwriters Laboratory
Flammability Classification 94-0
·Metal silicon junction,majority carrier conduction 0.945(24.0)
·low power loss,high efficiency MIN
·High forward surge current capability 0.220(5.6)
0.197(5.0)
·High temperature soldering guaranteed:260℃/10seconds,
0.375''(9.5mm) lead length,5Ibs. (2.3kg) tension 0.374(9.5)
0.283(7.2)
Mechanical Data
·Case: JEDEC DO-201AD molded plastic body
·Terminals: Plated leads solderable per MIL-STD-750,
0.945(24.0)
Method 2026 0.051(1.30) MIN
·Polarity: Color band denotes cathode end 0.045(1.15)
·Mounting Position: Any
Dimensions in inches and (millimeters)

Maximum Ratings and Electrical Characteristics


Rating at 25℃ ambient temperature unless otherwise specified
Single phase,half-wave 60Hz,resistive or inductive load,For capacitive load derate current by 20%.
HSR HSR HSR HSR HSR HSR HSR
Type Number SYMBOL Units
520 540 560 580 5100 5150 5200
Maximum recurrent peak reverse voltage VRM 20 40 60 80 100 150 200 V
Maximum RMS voltage VRMS 14 28 42 56 70 105 140 V
Maximum DC blocking voltage VDC 20 40 60 80 100 150 200 V
Maximum average rectified output current
I(AV) 5.0 A
0.375''(9.5mm) lead length(see fig.1)

Peak forward surge current 8.3ms single half sine-


wave superimposed on rated load (JEDEC IFSM 120.0 A
Method)

Maximum instantaneous forward voltage at5.0A VF 0.55 0.70 0.85 0.95 V


Maximum DC reverse current @TA=25℃ 0.5 0.2
IR mA
At Rated DC blocking voltage @TA=100℃ 20.0 10.0 2.0
Typical junction capacitance (Note 1) Cj 500.0 400.0 pF
Typical thermal resistance (Note 2) RθJA 30.0 ℃/W
Operating junction temperature range Tj -55 to +150 ℃
Storage temperature range TSTG -55 to +150 ℃
Note: 1. Measured at 1.0 MHz and applied reverse Voltage of 4.0V D.C
2. Thermal resistance from junction to ambient and from junction to lead at 0.375''(9.5mm) lead length,P.C.B.
mounted.

version:A/0 2016.11.28 1-3 www.hongxin-dg.com.cn


RATINGS AND CHARACTERISTIC CURVES HSR520 THRU HSR5200
AVERAGE FORWARD RECTIFIED CURRENT,

FIG. 1- FORWARD CURRENT DERATING CURVE FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT

PEAK FORWARD SURGE CURRENT,


5 150

4 125

Single Phase

AMPERES
3
AMPERES

Half Wave 60Hz 100


Resistive or
inductive Load

2
75

1
50 8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)

0
0 25 50 75 100 125 150 175 25
1 10 100

LEAD TEMPERATURE, C NUMBER OF CYCLES AT 60 Hz

FIG. 3-TYPICAL INSTANTANEOUS FORWARD FIG. 4-TYPICAL REVERSE CHARACTERISTICS


CHARACTERISTICS
20
INSTANTANEOUS REVERSE CURRENT, 100
INSTANTANEOUS FORWARD

10
CURRENT,AMPERES

10
TJ=100 C
MILLlAMPERES

1
TJ=25 C
PULSE WIDTH=300 µs 1
1%DUTY CYCLE TJ=75 C

0.1 HSR520-HSR540 0.1


HSR560
HSR580-HSR5150
HSR5200
0.01 TJ=25 C
0.01
0.2 0.4 0.6 0.8 1.0 1.1

0.001
0 20 40 60 80 100
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS PERCENT OF PEAK REVERSE VOLTAGE,%
TRANSIENT THERMAL IMPEDANCE,

FIG. 5-TYPICAL JUNCTION CAPACITANCE FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE


2000 100
JUNCTION CAPACITANCE, pF

TJ=25 C
1000

10
C/W

100
1

HSR520-HSR540
HSR580-HSR5200
0.1
0.01 0.1 1 10 100
10
0.1 1.0 10 100
REVERSE VOLTAGE,VOLTS t,PULSE DURATION,sec.

version:A/0 2016.11.28 2-3 www.hongxin-dg.com.cn


PRINTING INSTRUCTIONS

NOTES:
■HONGXIN reserves the right to make changes to this document and its products and specifications at any time without
notice.

■Customers should obtain and confirm the latest product information and specifications before final design,purchase or
use.

■HONGXIN makes no warranty,representation or guarantee regarding the suitability lf its products for any particular
purpose, nor does HONGXIN assume any liability for application assistance or customer product design.

■HONGXIN does not warrant or accept any liability with products which are purchased or used for any unintended or
unauthorized application.

■No license is granted by implication or otherwise under any intellectual propety rights of HONGXIN.

■HONGXIN products are not authorized for use as critical components in life support devices or systems without express
written approval by HONGXIN.

CONTACT INFORMATION:
DONGGUAN HONGXIN ELECTRONIC CO.,LTD
TEL:0769-83722095/83722096/38832588
FAX:0769-83722090/38832587
E-Mail:hongxin@hongxin-dg.com.cn
http://www.hongxin-dg.com.cn
Addess: No.1,gongye roab,shangchegang,gekeng village,hengli town,dongguan city,china.

version:A/0 2016.11.28 3-3 www.hongxin-dg.com.cn

S-ar putea să vă placă și