Documente Academic
Documente Profesional
Documente Cultură
Objectives:-
Main objectives of this lab are:
Introduction:
A noise dosimeter (American English) or noise dosemeter (british English) is a specialized
sound level meter intended specifically to measure the noise exposure of a person
integrated over a period of time ; usually to comply with health and safety regulations such
as the occupational safety and helth (OSHA) 29 CFR.
Display Description:-
It’s display have following parts:
Procedure:-
1. Power ON/OFF by pressing green button.
2. The display will show dose criteria level and see(LC), threshold level(Lt) and exchange
rate(Er).
3. This meter display the SPL from 70-140dB, but it can read less than 78dB. For dB greater
than 150dBA headphone icon will display, for greater than 140dBA a peak detective icon
will appear.
data logging.
1. The internal memory can store 8800 reading.
2. Press the run key to start recording. The MEM icon will appear in the display.
3. To stop data logging press run key again, MEM will disappear.
criteria level
criteria level in dB are: 80, 84, 85 and 90..
100% dose parameter is determined by the following equation:
100%Dose=criteria level for 8 hours.
exchange rate
exchange rate in dB are: 3, 4, 5 and 6.
So, 100% dose= 4 hours on 5dB
100% dose= 8 hourse on 6dB
Conclusion:-
From this lab we learned about usefulness, functions and methodology of noise dosimeter
and it’s applications in daily life.