Documente Academic
Documente Profesional
Documente Cultură
3412 C
1800 rpm
Industrial
CATERPILLAR ENGINE
SPECIFICATIONS
V12, 4-Stroke-Cycle Diesel
Bore......................................................... 137.2 mm (5.4 in)
Stroke...................................................... 152.4 mm (6.0 in)
Displacement..................................... 27.02 L (1,648.86 in3)
Aspiration................................. Turbocharged / Aftercooled
Compression Ratio.................................................... 14.5:1
Rotation (from flywheel end).................... Counterclockwise
Capacity for Liquids
Cooling System..........................................58.6 L (15.5 gal)
Lube Oil System (refill).............................. 68.1 L (18.0 gal)
Engine Weight, Net Dry (approximate).. 2,141 kg (4,720 lb)
FEATURES
Emissions Full Range of Attachments
Non-certified rating. Meets Tier 1, Stage I emissions. Wide range of bolt-on system expansion attachments,
factory designed and tested
Single Source Supplier
Caterpillar Unmatched Product Support Offered Through
- Casts engine blocks, heads, cylinder liners, and Worldwide Caterpillar Dealer Network
flywheel housings More than 1,500 dealer outlets.
- Machines critical components Caterpillar factory-trained dealer technicians service
- Assembles complete engine every aspect of your industrial engine.
Ownership of these manufacturing processes enables 99.7% of parts orders filled within 24 hours worldwide.
Caterpillar to produce high quality, dependable product. Caterpillar parts and labor warranty.
Preventive maintenance agreements available for repair
Factory-designed systems built at Caterpillar ISO before failure options.
certified facilities Scheduled Oil Sampling program matches your oil
sample against Caterpillar set standards to determine:
- internal engine component condition
Testing - presence of unwanted fluids
- presence of combustion by-products
Prototype testing on every model:
- proves computer design
- verifies system torsional stability Web Site
- functionality tests every model For all your industrial power requirements, visit
www.cat-industrial.com.
Every Caterpillar engine is dynamometer tested under
full load to ensure proper engine performance
PERFORMANCE CURVES
Torque Metric
N•m
Engine
Power kW
BSFC
g/kW-hr
Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
1800 465 2469 210 116.4
1750 464 2532 210 115.9
1700 460 2582 211 115.0
1650 452 2618 211 113.7
1600 443 2643 213 112.1
1550 432 2659 214 110.2
1500 419 2669 216 108.1
1450 406 2675 218 105.9
1400 392 2676 221 103.5
1350 378 2674 224 101.0
1300 363 2668 227 98.4
PERFORMANCE CURVES
Engine English
Torque lb•ft
Engine
Power bhp
BSFC
lb/bhp-hr
Engine Speed Engine Power Engine Torque BSFC lb/bhp-hr Fuel Rate
rpm bhp lb•ft gal/hr
1800 624 1821 .345 30.7
1750 622 1868 .345 30.6
1700 616 1904 .347 30.4
1650 607 1931 .347 30.0
1600 594 1949 .350 29.6
1550 579 1961 .352 29.1
1500 562 1969 .355 28.6
1450 545 1973 .358 28.0
1400 526 1974 .363 27.3
1350 507 1972 .368 26.7
1300 487 1968 .373 26.0
IND - A (Continuous) Continuous heavy duty service Engine Performance Engine performance is corrected
where the engine is operated at maximum power and to inlet air standard conditions of 99 KPA (29.31 IN HG)
speed up to 100% of the time without interruption or dry barometer and 25 deg C (77 deg F) temperature.
load cycling. Time at full load can be up to 100% of the These values correspond to the standard atmospheric
duty cycle. Typical service examples are: pumping, pressure and temperature as shown in SAE J1995.
ventilation, customer specs.
Performance measured using a standard fuel with fuel
gravity of 35 degrees API having a lower heating value
of 42,780 KJ/KG (18,390 BTU/LB) when used at 29
DEG (84.2 DEG F) where the density is 838.9 G/L
(7.001 LB/US GAL).
Engine Dimensions
(1) Length 1972.1 mm( 77.64 in ) Note: Do not use for installation design. See
general dimension drawings for detail
(2) Width 1483.4 mm( 58.4 in ) (Drawing # 7W5873 ).
(3) Height 1496.1 mm( 58.9 in )