Documente Academic
Documente Profesional
Documente Cultură
0 for download and use of Variant Configuration Products - SAP IPC Developer 3/9/19, 4(20 pm
Main
Introduction
How to Configuring SAP CRM 7.0 for
Functions of IPC
How to Configuring SAP CRM download and use of Variant
7.0 for download and use of
Variant Configuration
Products Configuration Products
16 Fields in Pricing Procedure and
Their Description
Other Info
IPC Facts
Variant functions
About Variant Functions The figure explains the high level process flow involved in Sales Order Product Configuration.
Pfunctions Implementation
Variant Conditions in Purchasing
Product configuration info
Assumptions:
Middleware is already setup between SAP CRM and R/3 (ECC) systems.
Variant Configuation is Already Setup in ECC system.
https://sites.google.com/site/sapipcdeveloper/how-to-configuring-sap-crm-7-0-for-download-and-use-of-variant-configuration-products Page 1 of 6
How to Configuring SAP CRM 7.0 for download and use of Variant Configuration Products - SAP IPC Developer 3/9/19, 4(20 pm
Steps:
Insert the below value in table/view TBE31 using SM30 Transaction code in ECC System
* *Insert the below value in the table CRMCONSUM using SM30 Transaction Code in ECC system
Insert the value in the table CRMRFCPAR SM30 Transaction Code in ECC system
- I To initialize the configuration database downloading of all given knowledge bases (exisiting
knowledge bases will be overwritten).
Replace RFCDEST with the appropriate RFC destinations of the AP system. When you create the
RFC destination, remember to grant full authorizations in object S_RFC to the AP SU01
connection user.
Replace INQUE with the appropriate buffer names in the AP system, if they are available.
Enter X in the USE IN Q field to enable the use of buffers. If the Buffers are not available then not
applicable.
Using the path mentioned SAP CRM GUI Menu > Architecture and Technology > Middleware > Data
Exchange > Initial Load> Start or Transaction code R3AS and choose the Material as Download
Object.
https://sites.google.com/site/sapipcdeveloper/how-to-configuring-sap-crm-7-0-for-download-and-use-of-variant-configuration-products Page 2 of 6
How to Configuring SAP CRM 7.0 for download and use of Variant Configuration Products - SAP IPC Developer 3/9/19, 4(20 pm
Using the path mentioned SAP CRM GUI Menu > Architecture and Technology > Middleware
> Data Exchange > Initial Load > Monitor Objects or transaction code R3AM1. To check if the
replication is done or not.
Downloading the Knowledge Base
Using the path mentioned SAP CRM GUI Menu > Architecture and Technology > Middleware > Data
Exchange > Initial Load > Start or Transaction code R3AS and choose the SCE as Download
Object.
You use the Extended Configuration Management (XCM) Administration tool to configure Web
applications, once you have installed the Web components. You use it to make configuration settings
needed at runtime.
CRM E-Commerce
ERP E-Commerce
Selling via eBay in CRM and ERP
Channel Management
Interaction Center
Interaction Center WebClient
Interaction Center Workforce Management
Internet Customer Self-Service
SAF
You only have to set up XCM configuration settings for those Web applications that are relevant to
the scenarios and processes you are using.The XCM user interface is used for Java-side
configuration of the Web application. You have to maintain two setting types in XCM:
Procedure
This section contains information about setting up User Interface (UI) for product configuration.
Product configuration is a function in the Internet Pricing and Configurator (IPC). The following steps
explain how to configure a Web application in XCM, assuming you have installed the application.
Starting XCM
Make sure that you have user id and password to logon to XCM. Provide a user and password. If
you are logging on for the first time use the Administrator user. the password you defined during the
installation of NetWeaver When the application opens a closed control tree is displayed on the left of
the screen. A screen Containing help information is displayed to the right.
You can use edit (change settings) or display (see settings) mode in XCM. You use the button in the
top right hand corner of the screen to change between modes. When you switch to edit mode a DB
lock is set meaning that only this user can edit the settings at one time. The lock is released
https://sites.google.com/site/sapipcdeveloper/how-to-configuring-sap-crm-7-0-for-download-and-use-of-variant-configuration-products Page 3 of 6
How to Configuring SAP CRM 7.0 for download and use of Variant Configuration Products - SAP IPC Developer 3/9/19, 4(20 pm
After logging on to XCM system click on Application Configuration > SAP > CRM Product Simulation
Once you have created the application configuration, you need to configure it by changing the
parameter values.
Static values Values that can be selected from a dropdown list box. These values do not have a
button in the Component Configuration column.
Values based on component configuration You must first configure a component, such as a
connection to your SAP CRM system, before you can assign the configured value to the
parameter. These parameters have a button in the Component Configuration column. For
example, there is a jco button for configuring connection parameters to the SAP system. If no
value is assigned to these parameters, you have to create a new component configuration. For
more information, see section “Creating a New Component Configuration”. If a value is assigned, it
is likely that you will not have to make any changes during the installation.
After completing the XCM setting please make sure that you restart the IPC Server related process
through NWA tool or JAVA Visual Admin tool
This process gives you an overview of all the settings that you need to make in Extended
Configuration Management (XCM) for the product configuration interface.The names of the created
application configurations have to be maintained in table COMM_IPC_PROP Or using the below
path SPRO > CRM > Basic Functions > Product Configuration > Define XCM Application
Configuration
TYPE Caller
TYPENAME Crmproductsimulation
PARNAME scenario.xcm
https://sites.google.com/site/sapipcdeveloper/how-to-configuring-sap-crm-7-0-for-download-and-use-of-variant-configuration-products Page 4 of 6
How to Configuring SAP CRM 7.0 for download and use of Variant Configuration Products - SAP IPC Developer 3/9/19, 4(20 pm
TYPE Caller
TYPENAME Crmordermaintain
PARNAME scenario.xcm
The links of IPC server needs to maintained in table COMM_IPC_URL or using the below
path SPRO > CRM > Basic Functions > Product Configuration > Define URL’s
UI_ANALYSIS http://socwes1er87.solutions.glbsnet.com:50100/ipcpricing
UI_CFG http://socwes1er87.solutions.glbsnet.com:50100/ipc/ipc/command.do
RSVMCRT_HEALTH_CHECK Report
Comments
Contact me at sarathchandrach@gmail.com
https://sites.google.com/site/sapipcdeveloper/how-to-configuring-sap-crm-7-0-for-download-and-use-of-variant-configuration-products Page 5 of 6
How to Configuring SAP CRM 7.0 for download and use of Variant Configuration Products - SAP IPC Developer 3/9/19, 4(20 pm
https://sites.google.com/site/sapipcdeveloper/how-to-configuring-sap-crm-7-0-for-download-and-use-of-variant-configuration-products Page 6 of 6