Documente Academic
Documente Profesional
Documente Cultură
Supply Range
OCTG mill
• Manufacturer of tubular products and
accessories for the oil and gas industry
• Tubing and Casing
• Premium joints:
MULTISEAL, TECHNISEAL, OPTIFLOW
• Pup-joints, X-overs, Flow couplings,
Blast-joints, Couplings etc.
• Drill pipes
What we stock:
• Tubing, Casing, Drill Pipe
• Tubing with extra long upsets for up to 3 recuts
• Test strings
• Macaroni Tubing
• Pup Joints - also with 3 recuts!
• X-Overs
• Couplings
• Solid/hollow bar material
Connections:
• TPS-MULTISEAL: 1.315” – 4 ½” OD
• TPS-TECHNISEAL: 2 3/8” – 5 ½” OD
• API EU, NU: 2 3/8“ - 4 1/2“
Grades:
• J-55, N/L-80, P-110, C-95SS, T-95, 13Cr80
- TBG TPS API Tubing and Casing are the standard API threaded
and coupled connections for oil production.
Tubing Non Upset Coupling Connection to API Spec.
5CT & 5B
The connections available are:
- UPTBG • Non upset tubing
Tubing External Upset Coupling Connection to API
Spec. 5CT & 5B 1.050“ - 3 1/2“ round thread 10 tpi.
4“ - 4 1/2“ round thread 8 tpi.
- SC/LC • External upset tubing
Casing Short/Long round Thread Coupling Connec-
tion to API Spec. 5CT & 5B 1.050“ - 1.900“ round thread 10 tpi.
2 3/8“ - 4 1/2“ round thread 8 tpi.
- BC • Integral joint tubing
Casing Buttress Thread Coupling Connection to API
Spec. 5CT & 5B 1.315“ - 2.063“ round thread 10 tpi.
Option: Option:
Thread Run Out Special Clearance and Thread Run Out Special Clearance and
and Face of Coupling Special Bevel and Face of Coupling Special Bevel
20°
60°
End of Pipe
End of Pipe
- Techniseal
The TPS-Techniseal tubing and casing joints are a • long centre fillet in the coupling for good stress dis-
versatile high performance non upset premium tribution in the joint
gastight coupling connection. Suitable for use in many • the stress distribution in the pin of the made up
different environments and well conditions. joint greatly reduces the susceptibility to hydrogen
embrittlement.
For example: • the joint effeciency is 100% with respect to the pipe
high pressure body in all normal modes*
high temperatures • excellent make up properties due to wide and well
deviated and horizontal wells defined torque values.
deep wells
highly corrosive environments For special requirements, technical modifications to the
standard requirements are available.
Characteristics:
• metal to metal gas tight seal Usual options are:
tubing: 30° seal angle - Matched strength: for 100% tensile efficiency of
casing: 10% taper seal heavy wall casing
• improved buttress thread form resistant to galling. - Special clearance: for extra clearance applications
• relief between pin crest and box root assures com- - Special bevel: with 20° bevel
munication through the joint and avoids trapping of - Resilient seal: with an extra teflon ring seal
compound. corrosion barrier
• coupling outside diameter often smaller than API
• streamlined internal connection profile gives an ex-
cellent match between pin bore and coupling centre
bore. Turbulence, pressure losses and corrosion are
reduced to a minimum.
- MULTISEAL TS 8 / TS 8 TR Characteristics:
Tubing External Upset High Performance Premium • Ultra
long upsets for repeated recuts,
Integral Connection perfectly suited for rental purposes
• 14° metal to metal gas tight internal pressure
- MULTISEAL TS 6 / TS 6 TR seal.
Tubing External Upset High Performance Premium
• 30° metal to metal gas tight internal external
Integral Connection
pressure seal and torque shoulder.
• 90° torque shoulder and 30° seal and torque
- MULTISEAL TS 4 / TS 4 TR shoulder provide effective protection against over
Casing External Upset High Performance Premium
torquing.
Integral Connection
• Two step improved non tapered buttress type
thread form.
The TPS-Multiseal tubing and casing connection is
• No thread interference, so no tendency to thread
an external upset two step integral gastight premi-
galling.
um joint proven over many years. It fulfills the highest
• Connection outside diameter smaller than API.
requirements for reliability and easy handling and is
• Stable two thread flank stabbing, cannot be cross
suitable for use in many different environments and
threaded.
well conditions.
• Fast and easy make up due to large tolerances
and optimal torque values.
For example:
• Streamlined internal connection profile giving an
high pressures
excellent match between pin and box bores, turbu-
high temperatures
lence, pressure losses and corrosion are reduced
deviated and horizontal wells
to a minimum.
deep wells
• The joint tensile effeciency is greater than for pipe
highly corrosive environments
body on all connections.
severe well condition
• Repeatable sealing capability on multiple make
and breaks.
as
Also available
90°
90°
h Joint
Buttress Type Thread Form Multiseal Flus
Buttress Type Thread 1,05"
Form - 4 1/2" : 8 TPI
1,05" - 4 1/2" : 8 TPI 2 3/8" - 4 1/2" : 6 TPI
gral joint
2 3/8" - 4 1/2" : 6 TPI 5"
- two step inte
- 7" : 4 TPI
5" - 7" : 4 TPI
L
20°
TPS-MULTISEA
20° - thread form
for
sh OD and ID
7.5°
7.5°
- completely flu
Design "TR" earance
Design "TR"
14° Internal
14° Internal
14° Internal
Metal to Metal
maximum cl
14° Internal Metal to Metal
Metal to Metal Pressure Seal with
Metal to Metal Pressure Seal and
Pressure Seal with Resilient Seal Ring
Pressure Seal and Internal Recess Free
Resilient Seal Ring Recess Free In the
Internal Recess Free Transition
RecessZone
Free In the Internal Transition Zone
Transition Zone Internal Transition Zone
14°
14°
- Drill Pipe
TPS Drill Pipe for application in the oil and gas explorati- Friction welded Tool Joints acc. to API SPEC. 7-2 and
on and production industry are available in all sizes and API 5DP:
upset ends according to API SPEC. 5DP. Other sizes and Numbered Connections NC
upsets are supplied on request. Internal Flush IF
Full Hole FH
Together with our certified partners we supply the drill Double Shoulder DST
pipe with friction welded Tool Joints, ready for use. High Torque HT
Drill Pipe Size Range: For special requirements, technical modifications to the
1,315“ - 6 5/8“ standard version are available.
• Pup Joints
• X-Overs
• Subs
• Flow couplings / Blast Joints
• Lifting caps / plugs
• Couplings
• And many more
Notice: The material contained in this catalog is for general warranty of any kind with respect to the information con-
information only. It is not intended as a substitute for the tained in this publication or the materials referred therein.
competent professional assistance which is a requisite to Anyone making use of the information or material therein
any specific application. While every effort has been made does so at their own risk and assumes any and all liability
to insure its accuracy, TPS makes no express or implied resulting from such use.
TPS App:
View our catalogues
on your mobile device. www.tpsd.de