Documente Academic
Documente Profesional
Documente Cultură
Version 7.3.2
Hardware Guide
IBM
Note
Before you use this information and the product that it supports, read the information in “Notices” on
page 67.
Product information
This document applies to IBM® QRadar® Security Intelligence Platform V7.3.2 and subsequent releases unless
superseded by an updated version of this document.
© Copyright International Business Machines Corporation 2014, 2019.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with
IBM Corp.
Contents
Introduction.......................................................................................................... v
iii
QRadar xx05...............................................................................................................................................61
QRadar xx24...............................................................................................................................................62
QRadar 21xx...............................................................................................................................................63
QRadar QFlow Collector 1201...................................................................................................................64
QRadar QFlow Collector 1202...................................................................................................................64
QRadar QFlow Collector 1301...................................................................................................................65
QRadar QFlow Collector 1310...................................................................................................................65
QRadar Event Collector 1501.................................................................................................................... 66
Notices................................................................................................................67
Trademarks................................................................................................................................................ 68
Terms and conditions for product documentation................................................................................... 68
IBM Online Privacy Statement.................................................................................................................. 69
General Data Protection Regulation..........................................................................................................69
iv
About this guide
The IBM QRadar SIEM Hardware Guide provides QRadar appliance descriptions, diagrams, and
specifications.
Intended audience
This guide is intended for all QRadar SIEM users responsible for investigating and managing network
security. This guide assumes that you have QRadar SIEM access and a knowledge of your corporate
network and networking technologies.
Technical documentation
For information about how to access more technical documentation, technical notes, and release notes,
see Accessing IBM Security Documentation Technical Note (http://www.ibm.com/support/docview.wss?
rs=0&uid=swg21612861).
Procedure
1. Prepare your new hardware:
a) Rack the appliance and connect network connections.
b) Review the paperwork for your appliance to determine which QRadar version is installed on the
new hardware.
2. Review your software version.
a) If your Console software version is older than the software on the appliance, re-install the
appliance with the newest ISO that is less than or equal to the Console software version.
Download the ISO file from Fix Central (www.ibm.com/support/fixcentral/).
b) Follow the installation wizard to complete the installation.
c) Type a root password for the appliance.
d) Type a temporary IP address and network information for the new hardware.
e) Log in as a root user, and select the appliance type during the installation process.
f) If your Console patch version is newer than the software on the appliance, download and install
the SFS (software fix/patch) from Fix Central (www.ibm.com/support/fixcentral/).
3. Remove the old appliance from the deployment.
Attention: Don't delete the components for the Event Collector, and Event Processor,
because these components are re-used.
4. Reassign the IP addresses to ensure that the decommissioned appliance doesn't cause an IP address
conflict in the network after it is powered back on.
a) To reassign the IP address of the old appliance to any unused address:
1) Use IMM (Integrated Management Module) for remote access, or use the local Console
keyboard, to log in to the command line of the old appliance as the root user.
2) Reassign the IP address of the old appliance by typing the following command:
/opt/qradar/bin/qchange_netsetup
9. Optional: Copy over event collector data, if you have any data in /store/ec.
a) Log into the old appliance as the root user.
b) Stop ecs-ec-ingress on the old appliance by typing the following command:
touch /storetmp/ecs-ec-ingress.ecs-ec-ingress.manually_stopped
f) Copy the data from /store/ec on the old appliance to /store/ec on the new appliance.
g) Remove the file created in substep d from the new appliance by typing the following command:
rm -f /storetmp/ecs-ec-ingress.ecs-ec-ingress.manually_stopped
10. Type the command systemctl start iptables after the configuration and data migration are
complete.
What to do next
After the data transfer is complete, decommission the old appliance and unrack the obsolete hardware.
Procedure
1. Prepare your new hardware:
a) Rack the appliance and connect network connections.
b) Power® on the appliance and log in as root.
c) When the system displays the license agreement (EULA), press Ctrl+C to open a command prompt.
d) To view the installed software version, type the following command:
/opt/qradar/bin/myver
e) Compare the software version on the new hardware and the old hardware:
• If the new hardware's software version is older than the software that is running in production,
log out, and then log in again as root and complete the installation. After the installation
completes, download the correct Fix Pack to upgrade the Console to the same version as the
deployment.
• If the new hardware's software version is newer than the software that is running in production,
you can either choose to upgrade your production system to match the new appliance, or
downgrade the software by installing an older release of QRadar from Fix Central (www.ibm.com/
support/fixcentral/). Reinstall the new system with an older release first, and then begin this
procedure.
• If the new hardware's software version is the same as the software that is running in production,
log out, log in again as root, and complete the installation.
f) Configure QRadar.
g) Type a temporary IP address and network information for the new hardware.
h) Type a root password for the appliance.
i) Follow the installation wizard to complete the installation.
j) If required from Step 1e, upgrade the new hardware to the same version level as the old Console.
cat /etc/management_interface
The interface that is listed in this file is the QRadar management interface.
c) Change the directory to /etc/sysconfig/network-scripts/.
d) Open the ifcfg-<name> file that was listed in the /etc/management_interface file.
e) Change the IP address to an unused or decommissioned range by editing the IPADDR= line.
f) Save the changes to the file.
g) Restart networking by typing the following command:
Note: After the network services are restarted, the IP address switch and the IP address change
are completed, freeing up the old IP address to use on the new Console. If any QRadar processes
on the system result in errors, QRadar operates normally if you switch the IP address back later.
Don't unrack the old hardware until after you transfer the data onto the new appliance.
/opt/qradar/bin/qchange_netsetup
c) Use the Configuration Wizard to change the IP address of the system to the old Console's IP
address.
d) Save and exit the wizard to complete the address change.
The new Console is installed with the old Console's IP address.
6. Copy certificates and custom-generated key pairs from the old appliance to the new appliance to
ensure that log sources and scanners can connect to remote sources. You must also migrate any
custom-generated private keys that you have by transferring the /etc/ssh and /root/.ssh
directories.
a) Log in to the old QRadar Console as the root user.
b) Copy the data from the old hardware to the new appliance by using the rsync as in the following
examples:
Tip: For better performance when using a crossover cable solution, use rsync -av instead of rsync -
avz.
Use this example for certificates:
chmod +x syncAriel.sh
screen
Note: For data transfers, start a screen session to reestablish the connection in case of a minor
network outage. To detach the session so that you can log out, type Ctrl+A and press D or use Ctrl
+D, then type Ctrl+D and use screen -r to reattach to the screen session.
f) Run the utility by typing the following command:
sh syncAriel.sh -i <new_Console's_IPAddress>
g) Wait for the transfer to complete, then close the screen session.
Data is migrated from the /store/ariel directory of the old Console to the new Console.
If your connection dropped or a network outage occurred, you can run the syncAriel.sh utility again
to migrate data. The syncAriel.sh utility keeps track of files that have been rsync'd to the new
appliance and data that has already been transferred will not be copied a second time.
9. Optional: Copy over event collector data, if you have any data in /store/ec.
a) Log into the old appliance as the root user.
b) Stop ecs-ec-ingress on the old appliance by typing the following command:
touch /storetmp/ecs-ec-ingress.ecs-ec-ingress.manually_stopped
f) Copy the data from /store/ec on the old appliance to /store/ec on the new appliance.
g) Remove the file created in substep d from the new appliance by typing the following command:
rm -f /storetmp/ecs-ec-ingress.ecs-ec-ingress.manually_stopped
Results
After the data transfer is complete, you might want to keep the old Console on hand in case you need to
revert to the old appliance. Otherwise, after a week or two, you won't need the old Console and you can
decommission or repurpose it for other uses.
Procedure
1. Prepare your new hardware:
a) Rack the appliance and connect network connections.
b) Review the paperwork for your appliance to determine which QRadar version is installed on the new
hardware.
2. Review your software version.
a) If your Console software version is older than the software on the appliance, re-install the
appliance with the newest ISO that is less than or equal to the Console software version. Download
the ISO file from Fix Central (www.ibm.com/support/fixcentral/).
b) Follow the installation wizard to complete the installation.
c) Type a root password for the appliance.
d) Type a new IP address and network information for the new hardware.
e) Log in as a root user and select the appliance type during the installation process.
f) If your Console patch version is newer than the software on the appliance, download and install the
SFS (software fix/patch) from Fix Central (www.ibm.com/support/fixcentral/).
3. Prepare your old QRadar hardware.
a) Log in to the old Console.
b) Click the Admin tab, and then click the Backup and Recovery icon.
c) From the navigation menu, click On Demand Backup.
Example:
rsync -avz /opt/qradar/conf/trusted_certificates/
root@targetserver:/opt/qradar/conf/trusted_certificates/
n) Verify that event or flow sources that were reporting to the original host are being processed in the
QRadar user interface.
After the host is added back to the QRadar deployment, the deployment process ensures that the
required configuration is regenerated on the new appliance. Verify that log source data is being pulled
and that flow data is being received by the new hardware. Any log sources that are not collecting data
might require certificates to be moved to the new host.
6. Transfer event and flow data to the new hardware.
You can use either rsync or SCP to complete the data transfer. These commands might require the
root user to accept SSH keys and provide the root password for the target server. The length of this
process depends on how much data needs to be transferred.
a) Log in to the old QRadar Console as the root user.
b) Copy the data from the old hardware to the new appliance (targetserver) by using the rsync
command, as in the following example:
Tip: For better performance when using a crossover cable solution, use rsync -av instead of rsync -
avz.
Example:
rsync -avz /store/ariel/ root@new_appliance:/store/ariel
7. Optional: Copy over event collector data, if you have any data in /store/ec.
a) Log into the old appliance as the root user.
b) Stop ecs-ec-ingress on the old appliance by typing the following command:
touch /storetmp/ecs-ec-ingress.ecs-ec-ingress.manually_stopped
f) Copy the data from /store/ec on the old appliance to /store/ec on the new appliance.
g) Remove the file created in substep d from the new appliance by typing the following command:
rm -f /storetmp/ecs-ec-ingress.ecs-ec-ingress.manually_stopped
What to do next
After the data transfer is complete, you might want to keep the old Console on hand in case you need to
revert to the old appliance. Otherwise, after a week or two, the old Console is no longer required and can
be decommissioned or repurposed for other uses.
To verify that your migration is successful, log in as an administrator, click the Log Activity tab and
perform a search to see whether events are flowing. Then click the Network Activity tab and perform a
search to see whether flows are being processed.
QRadar xx05
Use the IBM QRadar xx05 (MTM 4412-Q1E) appliance for various appliance types in your deployment.
Use the QRadar xx05 for the following appliance types:
• QRadar Event Processor 1605
• QRadar Flow Processor 1705
• QRadar 1805 Event and Flow Processor
• QRadar 3105 (All-in-One)
• QRadar 3105 (Console)
• QRadar Log Manager 1605
• QRadar Log Manager 3105 (All-in-One)
• QRadar Log Manager 3105 Console
• QRadar Risk Manager
• QRadar Vulnerability Manager
• QRadar 1400 Data Node
View hardware information and requirements for the QRadar xx05 in the following table:
You can upgrade your license to migrate your QRadar Log Manager 3105 (All-in-One) to QRadar 3105 (All-
in-One). For more information, see the Migrating QRadar Log Manager to QRadar SIEM Technical Note.
For battery removal steps, see Removing the coin-cell battery (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/t_removing_system_battery.html).
“QRadar xx05” on page 17 is based on the Lenovo System x3550 M5.
For more information about the front panel, see Front view (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8869.doc/c_front_view.html).
For more information about the back panel, see Rear view (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8869.doc/c_rear_view.html).
QRadar xx29
Use the IBM QRadar xx29 (MTM 4412-Q2A) for various appliance types in your deployment.
The QRadar xx29 can be used for the following appliances:
For internal flow sources over 50 K flows per minute (FPM), the QRadar 3129 (All-in-One) requires
external QRadar QFlow Collectors for layer 7 network activity monitoring.
For battery removal steps, see Removing the coin-cell battery (also called CMOS battery) (http://
publib.boulder.ibm.com/infocenter/systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/
t_removing_system_battery.html).
For more information about the front panel, see Front view (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/c_front_view.html).
For more information about the back panel, see Rear view (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/c_rear_view.html).
For more information, you can also see System x3650 M5 (https://lenovopress.com/lp0068-lenovo-
system-x3650-m5-machine-type-8871.html).
QRadar xx29-C
Use the IBM QRadar xx29-C (MTM 4654-Q3A) for various appliance types in your deployment.
The QRadar xx29-C can be used for the following appliances:
• QRadar Event Processor 1629
• QRadar Flow Processor 1729
• QRadar Event and Flow Processor 1829
• QRadar 3129 (All-in-One)
• QRadar 3129 (Console)
QRadar xx48
The IBM QRadar xx48 (MTM 4412-Q3B) captures logs from sources that generate a large amount of
traffic without a need for load balancing.
The QRadar xx48 appliance handles the higher levels of performance that are required by enterprise class
clients. For example, companies can use the QRadar xx48 for the following requirements:
• A company wants faster processing to search and analyze a large amount of data.
• A company wants to reduce the footprint of an IBM QRadar deployment, so they install QRadar xx48
appliances to reduce rack space.
The following appliances are examples of appliance types that you can use the QRadar xx48 for:
• QRadar Event Processor 1648
• QRadar Flow Processor 1748
• QRadar Event and Flow Processor 1848
• QRadar 3148 (All-in-One)
• QRadar 3148 (Console)
• QRadar 1400 Data Node
View hardware information and requirements for the QRadar xx48 in the following table:
For battery removal steps, see Removing the coin-cell battery (also called CMOS battery) (http://
www-01.ibm.com/support/knowledgecenter/api/redirect/systemx/documentation/index.jsp?topic=/
com.lenovo.sysx.8871.doc/t_removing_system_battery.html).
For more information about the front panel, see Front view (http://www-01.ibm.com/support/
knowledgecenter/api/redirect/systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/
c_front_view.html).
For more information about the back panel, see Rear view (http://www-01.ibm.com/support/
knowledgecenter/api/redirect/systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/
c_rear_view.html).
For more information, you can also see System x3650 M5 (https://lenovopress.com/lp0068-lenovo-
system-x3650-m5-machine-type-8871.html).
Table 10. Legend for use with the QRadar xx48-C image
Label Description
1 Event data storage
2 IMM port (1 GbE TX)
3 Management ports (10 GbE SFP+)
4 Management ports (1 GbE TX)
5 Fibre channel ports (16 Gb SFP+)
Table 12. Legend for use with the QRadar QFlow Collector 1202/1301 image
Label Description
1 QRadar firmware storage
2 IMM port (1 GbE TX)
3 Management ports (1 GbE TX)
4 Network packet capture (SFP)
5 Management ports (10 GbE SFP+)
For battery removal steps, see Removing the coin-cell battery (also called CMOS battery) (http://
www-01.ibm.com/support/knowledgecenter/api/redirect/systemx/documentation/index.jsp?topic=/
com.lenovo.sysx.8871.doc/t_removing_system_battery.html)
For more information about the QRadar QFlow Collector 1202/1301 including front and back panel
diagrams, see IBM System X3550 M5 (https://lenovopress.com/lp0067-lenovo-system-x3550-m5-
machine-type-8869).
Table 14. Legend for use with the QRadar QFlow Collector 1310 image
Label Description
1 QRadar Firmware Storage
2 IMM port (1 GbE TX)
3 Management ports (1 GbE TX)
4 Network Packet Capture (SFP/SFP+)
5 Management ports (10 GbE SFP+)
For battery removal steps, see Removing the coin-cell battery (also called CMOS battery) (http://
www-01.ibm.com/support/knowledgecenter/api/redirect/systemx/documentation/index.jsp?topic=/
com.lenovo.sysx.8871.doc/t_removing_system_battery.html)
For more information about the QRadar QFlow Collector 1310 including front and back panel diagrams,
see IBM System X3550 M5 (https://lenovopress.com/lp0067-lenovo-system-x3550-m5-machine-
type-8869).
Table 16. Legend for use with the QRadar Event Collector 1501 image
Label Description
1 Event data storage
2 IMM port (1GbE TX)
3 Management ports (1 GbE TX)
4 Event capture ports (1 GbE TX)
5 Management ports (10 GbE SFP+)
For more information about the QRadar Event Collector 1501 including front and back panel diagrams,
see IBM System X3550 M5 (https://lenovopress.com/lp0067-lenovo-system-x3550-m5-machine-
type-8869).
System performance of QRadar Network Insights appliances varies depending on the exact configuration
and tuning of the system components. It is influenced not only by hardware, but also factors such as the
search, extraction criteria, and the amount of network data. For more information, see Performance
impacts in the IBM QRadar Network Insights Installation Guide.
Table 18. Legend for use with the QRadar Network Insights 1901 image
Label Description
1 QRadar Firmware Storage
2 IMM Port (1GbE TX)
3 Management ports (1 GbE TX)
4 Network Packet Capture (SFP)
5 Management ports (10 GbE SFP+)
Note: Only the Network Packet Capture card [4] can be used for capturing network packet data.
For battery removal steps, see Removing the coin-cell battery (also called CMOS battery) (http://
www-01.ibm.com/support/knowledgecenter/api/redirect/systemx/documentation/index.jsp?topic=/
com.lenovo.sysx.8871.doc/t_removing_system_battery.html)
For more information about the QRadar Network Insights 1901, including front and back panel diagrams,
see IBM System X3550 M5 (https://lenovopress.com/lp0067-lenovo-system-x3550-m5-machine-
type-8869).
Table 22. Legend for use with the QRadar Network Insights 1910 image
Label Description
1 QRadar firmware storage
2 IMM port (1 GbE TX)
3 Management ports (1 GbE TX)
4 Network Packet Capture (SFP/SFP+)
5 Management ports (10 GbE SFP+)
Table 24. Legend for use with the QRadar Network Insights 1910-C image
Label Description
1 QRadar firmware storage
2 IMM port (1 GbE TX)
3 Management ports (10 GbE SFP+)
4 Management ports (1 GbE TX)
5 Network Packet Capture (SFP/SFP+)
Ports are numbered 0, 1, 2, 3, from left to right.
System performance of QRadar Network Insights appliances varies depending on the exact configuration
and tuning of the system components. It is influenced not only by hardware, but also factors such as the
search, extraction criteria, and the amount of network data. For more information, see Performance
impacts in the IBM QRadar Network Insights Installation Guide.
Table 26. Legend for use with the QRadar Network Insights 1920 image
Label Description
1 QRadar Firmware Storage
2 Network Packet Capture (SFP/SFP+)
3 IMM Port (1GbE TX)
4 Management ports (10 GbE SFP+)
5 Cabled internally. Do not use these ports.
6 Management ports (1 GbE TX)
For battery removal steps, see Removing the coin-cell battery (also called CMOS battery) (http://
publib.boulder.ibm.com/infocenter/systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/
t_removing_system_battery.html)
For more information about the front panel, see Front view (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/c_front_view.html).
For more information about the back panel, see Rear view (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/c_rear_view.html).
Table 28. Legend for use with the QRadar Network Insights 1920-C image
Label Description
1 QRadar firmware storage
2 IMM port (1 GbE TX)
3 Management ports (10 GbE SFP+)
4 Management ports (1 GbE TX)
5 Network Packet Capture (SFP/SFP+)
Ports are numbered 3, 2, 1, 0, from left to right.
View hardware information and requirements for the QRadar Incident Forensics appliance in the following
table:
Table 30. Legend for use with the QRadar Incident Forensics image
Label Description
1 Event data storage
2 IMM port (1 GbE TX)
3 Management ports (10 GbE SFP+)
4 Management ports (1 GbE TX)
For more information about the front panel, see Front view (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/c_front_view.html).
For more information about the back panel, see Rear view (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/c_rear_view.html).
For more information, you can also see System x3650 M5 (https://lenovopress.com/lp0068-lenovo-
system-x3650-m5-machine-type-8871.html).
Table 32. Legend for use with the QRadar Incident Forensics-C image
Label Description
1 Event data storage
For battery removal steps, see Removing the coin-cell battery (also called CMOS battery) (http://
publib.boulder.ibm.com/infocenter/systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/
t_removing_system_battery.html)
For more information about the front panel, see Front view (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/c_front_view.html).
For more information about the back panel, see Rear view (http://publib.boulder.ibm.com/infocenter/
systemx/documentation/index.jsp?topic=/com.lenovo.sysx.8871.doc/c_rear_view.html).
For more information, you can also see System x3650 M5 (https://lenovopress.com/lp0068-lenovo-
system-x3650-m5-machine-type-8871.html).
Table 36. Legend for use with the QRadar Network Packet Capture-C image
Label Description
1 Packet capture storage
2 IMM port (1 GbE TX)
3 Management ports (10 GbE SFP+)
4 Management ports (1 GbE TX)
5 External RAID DAS ports
6 Network packet capture (SFP/SFP+)
7 QRadar firmware storage
QRadar xx05
Use the IBM QRadar xx05 (MTM 4380-Q1E) for various appliance types in your deployment.
The QRadar xx05 can be used for the following appliances:
• QRadar Event Processor 1605
• QRadar Flow Processor 1705
• QRadar 1805
• QRadar 3105 (All-in-One)
• QRadar 3105 (Console)
• QRadar Log Manager 1605
• QRadar Log Manager 3105 (All-in-One)
• QRadar Log Manager 3105 Console
• QRadar 1400 Data Node
• QRadar Vulnerability Manager
• QRadar Risk Manager
View hardware information and requirements for the QRadar xx05 in the following table:
The QRadar 3105 (All-in-One) requires external QRadar QFlow Collectors for layer 7 network activity
monitoring.
For more information about IBM QRadar M4 Consoles, Processors and Data Nodes, including front and
back panel diagrams, see IBM System X3650 M4 BD (https://lenovopress.com/tips1102-system-x3650-
m4-bd).
QRadar xx28
Use the IBM QRadar xx28 (MTM 4380-Q2E) for various appliance types in your deployment.
The QRadar xx28 can be used for the following appliances:
• QRadar Event Processor 1628
• QRadar Flow Processor 1728
• QRadar Flow Processor 1828
• QRadar 3128 (All-in-One)
• QRadar 3128 (Console)
• QRadar Log Manager 1628
• QRadar Log Manager 3128 (All-in-One)
• QRadar Log Manager 3128 (Console)
• QRadar 1400 Data Node
Note: For QRadar xx28 appliances, you are responsible for acquiring the proper transceivers for your
network.
View hardware information and requirements for the QRadar xx28 in the following table:
The QRadar 3128 (All-in-One) requires external QRadar QFlow Collectors for layer 7 network activity
monitoring.
For more information about IBM QRadar M4 Consoles, Processors and Data Nodes, including front and
back panel diagrams, see IBM System X3650 M4 BD (https://lenovopress.com/tips1102-system-x3650-
m4-bd).
QRadar xx28-C
Use the IBM QRadar xx28-C (MTM 4380-Q1F) for various appliance types in your deployment.
IBM QRadar xx28-C appliances are manufactured by Dell, and can be used for the following appliances:
• QRadar Event Processor 1628-C
• QRadar Flow Processor 1728-C
• QRadar Flow Processor 1828-C
• QRadar 3128-C (All-in-One)
• QRadar 3128-C (Console)
• QRadar Log Manager 1628-C
• QRadar Log Manager 3128-C (All-in-One)
• QRadar Log Manager 3128-C (Console)
• QRadar Risk Manager
• QRadar Vulnerability Manager
• QRadar Incident Forensics
The QRadar 3128-C (All-in-One) requires external QRadar QFlow Collectors for layer 7 network activity
monitoring.
Table 40. Legend for use with the QRadar xx28-C image
Label Description
1 Event data storage
2 IMM port (1GbE TX)
3 Fibre channel ports (16 Gb TX)
4 Management ports (10 GbE SFP+)
5 Management ports (1 GbE TX)
QRadar 21xx
The IBM QRadar 2100 (MTM 4380-Q1C) appliance is an all-in-one system that combines Network
Behavioral Anomaly Detection (NBAD) and Security Information and Event Management (SIEM) to
accurately identify and appropriately prioritize threats that occur on your network.
Note: If you are upgrading a QRadar 21xx appliance from V7.2.8 or earlier, larger apps such as Pulse, QDI,
or User Behavior Analytics can cause overall performance issues on the Console. Apps can be offloaded to
a App Host to provide extra storage, memory, and CPU resources for your apps without impacting the
processing capacity of your Console.
The QRadar 21xx can be used for the following appliances:
• QRadar 2100
• QRadar Log Manager 2100
View hardware information and requirements for the QRadar 21xx in the following table:
For more information about QRadar QFlow Collector appliances, including front and back panel diagrams,
see IBM System X3550 M4 (https://lenovopress.com/tips0851-system-x3550-m4-e5-2600-v2).
For more information about QRadar QFlow Collector appliances, including front and back panel diagrams,
see IBM System X3550 M4 (https://lenovopress.com/tips0851-system-x3550-m4-e5-2600-v2).
Table 45. Legend for use with the QRadar QFlow Collector 1202-C/1301-C image
Label Description
1 QRadar firmware storage
2 IMM port (1 GbE TX)
3 Management ports (10 GbE SFP+)
4 Management ports (1 GbE TX)
5 Network packet capture (SFP)
For information about battery replacement, watch the PowerEdge R630: Remove/Install System Battery
video (http://www.dell.com/support/contents/us/en/19/videos/videoPlayer/R3dGJkcDrKfQHglE-
qqPpuGprIpm_uF-).
For more information about QRadar QFlow Collector appliances, including front and back panel diagrams,
see IBM System X3550 M4 (https://lenovopress.com/tips0851-system-x3550-m4-e5-2600-v2).
For more information about QRadar QFlow Collector appliances, including front and back panel diagrams,
see IBM System X3550 M4 (https://lenovopress.com/tips0851-system-x3550-m4-e5-2600-v2).
Table 49. Legend for use with the QRadar QFlow Collector 1310 SR-C/LR-C image
Label Description
1 QRadar firmware storage
2 IMM port (1 GbE TX)
3 Management ports (10 GbE SFP+)
4 Management ports (1 GbE TX)
5 Network packet capture (SFP/SFP+)
For information about battery replacement, watch the PowerEdge R630: Remove/Install System Battery
video (http://www.dell.com/support/contents/us/en/19/videos/videoPlayer/R3dGJkcDrKfQHglE-
qqPpuGprIpm_uF-).
For more information about QRadar Event Collectors, including front and back panel diagrams, see IBM
System X3550 M4 (https://lenovopress.com/tips0851-system-x3550-m4-e5-2600-v2).
System performance of QRadar Network Insights appliances varies depending on the exact configuration
and tuning of the system components. It is influenced not only by hardware, but also factors such as the
search, extraction criteria, and the amount of network data. For more information, see Performance
impacts in the IBM QRadar Network Insights Installation Guide.
Figure 22. Back panel of the QRadar Network Insights 1920-C appliance
Table 52. Legend for use with the QRadar Network Insights 1920-C image
Label Description
1 QRadar Firmware Storage
2 IMM Port (1GbE TX)
For more information about QRadar Incident Forensics appliances, including front and back panel
diagrams, see IBM System X3650 M4 BD (https://lenovopress.com/tips1102-system-x3650-m4-bd).
For more information about QRadar Packet Capture appliances, including front and back panel diagrams,
see IBM System X3650 M4 BD (https://lenovopress.com/tips1102-system-x3650-m4-bd).
Table 56. Legend for use with the QRadar Network Packet Capture-C image
Label Description
1 Packet capture storage
2 IMM port (1GbE TX)
3 External RAID DAS ports
4 Management ports (10 GbE SFP+)
5 Management ports (1 GbE TX)
6 Network packet capture (SFP/SFP+)
7 QRadar firmware storage
QRadar xx05
Use the IBM QRadar xx05 (MTM 4379-Q05) for various appliance types in your deployment.
The QRadar xx05 can be used for the following appliances:
• QRadar Event Processor 1605
• QRadar Flow Processor 1705
• QRadar 1805
• QRadar 3105 (All-in-One)
• QRadar 3105 (Console)
• QRadar Log Manager 1605
• QRadar Log Manager 3105 (All-in-One)
• QRadar Log Manager 3105 Console
• QRadar Vulnerability Manager
• QRadar Risk Manager
• QRadar 1400 Data Node
View hardware information and requirements for the QRadar xx05 in the following table:
Memory 48 GB
Storage 6.2 TB or larger dedicated event storage
Power supply Dual Redundant 675 W AC Power Supply
Dimensions 29.5 inches deep x 19.2 inches wide x 3.4 inches high
The QRadar 3105 (All-in-One) requires external QRadar QFlow Collectors for layer 7 network activity
monitoring.
For more information about QRadar xx05 appliances, including front and back panel diagrams, see IBM
System x3630 M3 (https://lenovopress.com/tips0807).
QRadar xx24
Use the IBM QRadar xx24 (MTM 4379-Q24) for various appliance types in your deployment.
The QRadar xx24 can be used for the following appliances:
• QRadar Event Processor 1624
• QRadar Flow Processor 1724
• QRadar 3124 (All-in-One)
• QRadar 3124 (Console)
• QRadar Log Manager 1624
• QRadar Log Manager 3124 (All-in-One)
• QRadar Log Manager 3124 Console
• QRadar 1400 Data Node
View hardware information and requirements for the QRadar xx24 in the following table:
Memory 64 GB
Storage 16 TB or larger dedicated event storage
Power supply Dual Redundant 675 W AC Power Supply
Dimensions 29.5 inches deep x 19.2 inches wide x 3.4 inches high
The QRadar 3124 (All-in-One) requires external QRadar QFlow Collectors for layer 7 network activity
monitoring.
For more information about QRadar xx24 appliances, including front and back panel diagrams, see IBM
System x3630 M3 (https://lenovopress.com/tips0807).
QRadar 21xx
The IBM QRadar 2100 (MTM 4378-Q21) appliance is an all-in-one system that combines Network
Behavioral Anomaly Detection (NBAD) and Security Information and Event Management (SIEM) to
accurately identify and appropriately prioritize threats that occur on your network.
Note: If you are upgrading a QRadar 21xx appliance from V7.2.8 or earlier, larger apps such as Pulse, QDI,
or User Behavior Analytics can cause overall performance issues on the Console. Apps can be offloaded to
a App Host to provide extra storage, memory, and CPU resources for your apps without impacting the
processing capacity of your Console.
View hardware information and requirements for the QRadar 21xx in the following table:
Memory 24 GB
Storage 1.3 TB or larger
Power supply Dual Redundant 675W AC Power Supply
Dimensions 28" D x 17.3" W x 1.69" H
Included Event Collector
components
Event Processor
Single QRadar QFlow Collector, which supports up to 50 Mbps
Memory 6 GB
Storage 146 GB
Power supply Dual Redundant 460W AC Power Supply
Dimensions 28" D x 17.3" W x 1.69" H
Included QRadar QFlow Collector 1201
components
For more information about QRadar QFlow Collector appliances, including front and back panel diagrams,
see IBM System x3550 M3 (https://lenovopress.com/tips0804).
Memory 6 GB
Storage 146 GB
Power supply Dual Redundant 460W AC
Dimensions 28" D x 17.3" W x 1.69" H
Included QRadar QFlow Collector 1202
components
NT4E-STD Napatech Network Adaptor
Memory 6 GB
Storage 146 GB
Power supply Dual Redundant 460W AC Power Supply
Dimensions 28" D x 17.3" W x 1.69" H
Included QRadar QFlow Collector 1301
components
NT4E-STD Napatech Network Adaptor
For more information about QRadar M3 2100, QRadar Event Collector 1501, and all QRadar Flow
Processor appliances, including front and back panel diagrams, see IBM System x3550 M3 (https://
lenovopress.com/tips0804).
Memory 8 GB
Storage 300 GB
Power supply Dual Redundant 460W AC Power Supply
Dimensions 28" D x 17.3" W x 1.69" H
For more information about QRadar M3 2100, QRadar Event Collector 1501, and all QRadar Flow
Processor appliances, including front and back panel diagrams, see IBM System x3550 M3 (https://
lenovopress.com/tips0804).
Memory 24 GB
Storage 1.3 TB dedicated storage
Power supply Dual Redundant 675W AC Power Supply
Dimensions 28" D x 17.3" W x 1.69" H
Included QRadar Event Collector 1501
components
For more information about QRadar Event Collectors, including front and back panel diagrams, see IBM
System x3550 M3 (https://lenovopress.com/tips0804).
For license inquiries regarding double-byte character set (DBCS) information, contact the IBM Intellectual
Property Department in your country or send inquiries, in writing, to:
Such information may be available, subject to appropriate terms and conditions, including in some cases,
payment of a fee.
Trademarks
IBM, the IBM logo, and ibm.com® are trademarks or registered trademarks of International Business
Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be
trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at
"Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.
Applicability
These terms and conditions are in addition to any terms of use for the IBM website.
Personal use
You may reproduce these publications for your personal, noncommercial use provided that all proprietary
notices are preserved. You may not distribute, display or make derivative work of these publications, or
any portion thereof, without the express consent of IBM.
Commercial use
You may reproduce, distribute and display these publications solely within your enterprise provided that
all proprietary notices are preserved. You may not make derivative works of these publications, or
reproduce, distribute or display these publications or any portion thereof outside your enterprise, without
the express consent of IBM.
Rights
Except as expressly granted in this permission, no other permissions, licenses or rights are granted, either
express or implied, to the publications or any information, data, software or other intellectual property
contained therein.
68 Notices
IBM reserves the right to withdraw the permissions granted herein whenever, in its discretion, the use of
the publications is detrimental to its interest or, as determined by IBM, the above instructions are not
being properly followed.
You may not download, export or re-export this information except in full compliance with all applicable
laws and regulations, including all United States export laws and regulations.
IBM MAKES NO GUARANTEE ABOUT THE CONTENT OF THESE PUBLICATIONS. THE PUBLICATIONS ARE
PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT,
AND FITNESS FOR A PARTICULAR PURPOSE.
Notices 69
70 IBM Security QRadar : Hardware Guide
IBM®