Documente Academic
Documente Profesional
Documente Cultură
MADE IN KOREA
- Contents -
1. Safety Caution & System Requirement
2. Introduction of Software Installation Process
3. Introduction of Compressed Video Codec Installation Process
4. Introduction of Diagnosis Software Operation Process
5. Additional Information
* Manual & Software Update will be continuous.
2. Do not use UB CAM PRO if you notice any signs of damage or malfunction
and contact PROVIX or its official distributor in your country immediately.
4. Do not use any other attachments other than the attachments designed by
Provix exclusively for UB Cam.
10. Close & save all programs before installing UB CAM PRO Software.
System Requirement
1. Please insert the CD 2. Double Click CD-Driver, or open the files in CD.
1. Open “UB CAM PRO INSTALL” folder 2. Double Click “setup” file
3. Installation process will be started as above, Click 4. After designating folder, click “Next”
“Next”
Introduction of Software Installation Process
5. Click “Restart computer” and Click Finish 6. After restarting your computer, you can find this
Icon. Now you are ready to use UB CAM PRO. Just
plug in! & double click this icon
P.S: If you would like to keep installing Compressed Video Codec. Please see
the next page and follow the directions
3. Introduction of Compressed Video Codec
Installation Process
11. You have to click “Do not limit” and Click “Next” 12. You have to click “Do not limit” and Click “Next”
Introduction of Compressed Video Codec Installation Process
21. Click “Finish” 21. You can find this Icon. Now you are ready to use
UB CAM PRO & Compressed AVI function. Just plug
in! & double click this icon!
4. Introduction of Diagnosis Software Operation Process
Introduction of Diagnosis Software Operation Process
After finishing installation process as before, you can activate Diagnosis
Software.
This part contains useful information for users while they are operating this
software.
We also recommend reading this part for your better performance and
complete understanding of the software.
1. Connect USB output of UB CAM PRO to USB 2. LED & Power light turn on automatically
Port
3. Attach the speculum to UB CAM PRO (meet 4. Roll to Left Side to fix the speculum (the each
the each point of speculum & UB CAM PRO) point of speculum & UB CAM PRO will be turned
to left side)
4. Introduction of Diagnosis Software Operation Process
Introduction of Diagnosis Software Operation Process
5. Double-click the UBCAMPRO PROVIX icon 6. Diagnosis System will be operated as above
To turn off/on,
Press this button
for 3~4 seconds
7. In order to turn off, just press “FREEZE” Button 8. Turned off as above. And If you want to turn
for 3~4 seconds, then UB CAM PRO will be on again, Just press “FREEZE” Button for 3~4
turned off. seconds again, then UB CAM PRO will be turned
on.
Options & Functions In Image View Menu
If you click Image View button, you’ll have this kind of Viewing Screen.
There are 3 red rectangles with numbers.
If you take a look at the next page, you can have detail descriptions about
these functions
Options & Functions In Image View Menu
1 * View Icon: If you click this icon, you can have the live image.
* Pen Icon: After pressing Freeze Button, if you click this icon
and draw lines on the captured image, you can draw lines on the
captured image
* Eraser Icon: If you click this icon, you can erase what you drew.
* Pen Color Icon: You can choose the pen color with this
* Image Control Icon: If you click this icon, you can control the
2 Brightness, Contrast, Hue, Saturation, Sharpness, Gamma,
Backlight Comp.
* Save Icon: If you click this icon, you can save the current image(s)
and designate the folder & file name.
* Full Screen Icon: If you click this icon, the screen will be exchanged to the
full screen mode.
3
* Full Mode: If you click this icon, a single screen will be appeared.
* Half Mode: If you click this icon, dual screens will be appeared.
3
4
5
If you double click the saved
image, you can delete it
If you click Image Management button, you’ll have this kind of Viewing Screen.
There are 5 red rectangles with numbers.
If you take a look at the next page, you can have detail descriptions about
these functions
Options & Functions In Image Management Menu
* MovieTap: In this tap, you can open & play the movie(s).
2
* Image tools: Automatically saved pictures can be edited by
these tools in Image tap.
3
* Recording Icon: You can record & save the video through this
icon.
* Stop Recording Icon: If you click this icon, recording video will
be stopped & saved.
* Save Icon: If you click this icon, you can save the current image(s)
and designate the folder & file name.
* Full Screen Icon: If you click this icon, the screen will be exchanged to the
full screen mode.
* Image Control Icon: If you click this icon, you can control the
Brightness, Contrast, Hue, Saturation, Sharpness, Gamma, Backlight
Comp.
4
* The folder for auto-saving images: If you capture image(s) in Image
Management Menu, the captured images will be saved this folder
automatically.
5 * Pre-view Tap: This tap shows the images that you captured. If you
click, you can edit the image. Or if you double-click the image, you can
delete the image.
5. Additional Information
Detail Information for Otoscope & Accessories
Article No. Photo Specification
USB Output
Video
OTO-1000 Capture, Save & Record
Otoscope Including 8 types of Plastic Speculum
USB
Extension USB Extension Cable
Cable USB EXT Length: 5m
* Sold USB 2.0
Separately
Stand for
Video Stand for OTO-1000
Otoscope OTB-100 No Function, Stand Only
* Sold
Separately