Documente Academic
Documente Profesional
Documente Cultură
NB ID OD Thickness
mm mm mm mm
1 Dia of the support pipe in mm 100 102.26 114.3 6.02
3 Load carrying capacity of the pipe in Kgs in Bending (Pb) 721.71 Pb=(fb*Z)/L
4 Load carrying capacity of the pipe in Kgs in shear (Ps) 18437.92 Ps=(fs*A)
If exact values of the stresses are known change the same in the formula . Otherwise consider the same
Cross Sectional area Moment of Inertia Modulus of section weight per m
Sqcm (A) cm4 cm3 (Z) Kgs (w)
20.49 3011.73 52.70 16.07
er the same
LOAD CALCULATION FOR GUIDE ANGLES AND LINE STOPPERS ( DRAWING 583
NOTE:
2. If exact Z for 3, 4, 5 sections and stress values are known input accordingly. Otherwise consider the same.
Calculation of strength of the weld = length of the weld in cms (L)x size of the weld in cms (t) x 0.70x 800 Kg/c
627
3213
1913
11107
1400
3071
4340
1135
1238
n cms (L)x size of the weld in cms (t) x 0.70x 800 Kg/cm2/1.50
LOAD CALCULATION FOR GUIDE ANGLES AND LINE STOPPERS ( DRAWING
NOTE:
2. If exact Z for 3, 4, 5 sections and stress values are known input accordingly. Otherwise consider the same.
Calculation of strength of the weld = length of the weld in cms (L)x size of the weld in cm
Note: If fillet weld is done on both sides of angle DOUBLE THE LOAD
LINE STOPPERS ( DRAWING 5865 & 5833) )
2688 2240
5018 2800
25707 1568
30613 2240
62197 2987
11200 2016
24565 2240
34720 2240
9079 2800
22773 2987
n cms (L)x size of the weld in cms (t) x 0.70x 800 Kg/cm2/1.50