Documente Academic
Documente Profesional
Documente Cultură
User’s Guide
1
Digital cable Receiver
TROUBLE SHOOTING 35
General Function
Select Channel 16
Previous Channel Recall 16
TV & Radio switching 16
Channel Information 17
Volume & Audio Control 17
Channel Manager
Channel Manager 18
Favorite Channel 19
Move Channel 19
Lock Channel 20
Rename Channel 20
Delete Channel 21
Sort Channel 21
General Information
A Digital cable Receiver is a convenient product that allows you to view a variety of programs
provided through cable. This user’s guide covers the installation of the DSR and the necessary
steps to implement various features. This also explains special features available only in this DSR
in detail, which will allow you to make full of these feature.
Main Feature
3
General Information
For Your Safety
This STB has been manufactured to meet international safety standards. Please read all of the
safety and operating instructions before operating the product. And keep all safety and operating
instructions for future reference.
2. Overloading
Do not overload a wall outlet, extension cord, or adapter as this may result in fire electric shock.
3. Liquids
Do not expose the STB to rain or moisture. The apparatus shall not be exposed to dripping or
splashing water and that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
4. Cleaning
Disconnect the STB from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a light damp cloth for cleaning.
5. Ventilation
The slots on top of the STB must be left uncovered to allow proper airflow to the unit. Do not
stand the STB on soft furnishing carpets. Do not expose the STB to direct sunlight or do not
place it near a heater. Do not stack electronic equipments on top of the STB. Keep distance
about minimum 10cm from the wall when it’s installed.
6. Attachments
Do not use any attachments not recommended by product manufacturer as they may cause
hazards.
8. Connection to the TV
Disconnect the STB from the mains before connecting or disconnecting the cable from the TV.
FAILURE TO DO SO CAN DAMAGE THE TV.
9. Earthing
The LNB cable MUST BE EARTHED to the system earth for the cable dish. The earth system
must comply with SABS 061.
10. Location
Place the STB indoor in order to prevent potential damage from lightning, rain, or direct sunlight.
11. Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
12. The socket
socket-outlet shall be installed near the equipment and shall be easily accessible.
4
General Information
Unpacking
Make sure you have received all the items in the cable Receiver carton.
AAA
AAA
General Operation
Throughout this manual you will notice that the everyday operation of your STB is based on
a series of user friendly on screen display and menus. These menus will help you get the
most from your STB, guiding you through installation, channel organizing, viewing and
many other functions.
All function can be carried out using the buttons on the RCU, and some of the function can
also be carried out using the buttons on the front panel.
If at any time when you using the menus you want to return to the normal TV mode, press
the TV/AV button.
The STB is easy to use, always at your command and adaptable for future advances.
Please be aware that new software may change the functionality of the STB.
In the case of your facing difficulties with the operation of your STB, please consult the
relevant section of this manual, including the Problem Shooting, or alternatively call your
dealer or a customer service adviser.
5
General Information
1 Turns power On/Off of the DSR 17 UHF Switches to UHF tuning mode.
2 When watching a channel, mutes the 4:3/16:9 Switches between 4:3 or 16:9
sound
18
screen mode.
3 0~9 Enter number of the required menu
19 AUDIO When watching a channel, switches
item or select a channel number to watch. the audio languages.
4 TV/RADIO Switches between TV and Radio
20 Selects the different audio modes.
mode.
5 FAV Display the favorite channel list.
*OPTION(FOR PVR MODEL)
6 MENU Press this key one time to run menu
on screen, and call command box. 21 REW Rewind program with 3 step speed
7 Moves up/down a page in the channel 22 PLAY/SLOW Display file list in Live mode.
list. Playback program by normal or slow speed.
8 PR Switches back to previous channel. 23 F.F Fast forward program with 3 step speed.
6
General Information
Front Panel
KEY FUNCTION
MENU Shows the main menu and command box on the screen.
7
General Information
Rear Panel
Power ON/OFF
Connect to Digital Amplifier
Connect to TV or VCR
Connect to TV ANT INPUT
8
Menu Information
Once you properly installed and connected cables of the Receiver, the menu will be
displayed
- Channel Manager
- Program Guide
- Timer
- User Installation
- Utility (Game)
- Conditional Access
To move up and down, press “PR+ or PR-”. To move left and right, press keys on
the RCU. Place cursor on the “User Installation”, then sub-menu will be displayed on the
screen. (Refer to the picture)
9
User Installation
- Auto Search
- Manual Search
- System setting
- Parental Lock
- Factory Default
Auto Search
10
User Installation
Manual Search
11
User Installation
System setting
1) OSD Language
Select your desired OSD language.
2) Audio Language
Select your desired audio language to be
in the top priority under the condition that
this language is supported from the channel.
3) Screen Format
If your TV supports 16:9 screen format and
selected channel provides 16:9 format
program, select 16:9.
4) Video Output
If your SCART supports RGB control,
select RGB. Otherwise select CVBS.
5) TV Type
Select the type according to your TV type.
6) Start On Channel
If you press OK key, then the channel list is
displayed. You can select one channel of the
list, the selected channel starts whenever you
turn on Receiver.
7) UHF Standard : Select UHF type.
12
User Installation
System setting
Press “OK”
13
User Installation
Parental Lock
14
User Installation
Factory Default
15
General Viewing Function
Select Channel
16
General Viewing Function
Channel Information
2) Mute
To mute the sound, press button on the RCU.
To bring back the normal sound, press this key
once again.
3) Audio Control
Press the key repeatedly to select one of
three possible Audio settings (Left, Right and
stereo) The current audio condition will be
displayed in the channel information
4) Language Selection
Press the AUDIO key on the RCU repeatedly to
select audio-language. This is dependent on the
transmission of audio signal from the air which
supports Multi-language.
17
CHANNEL MANAGER
Receiver provides most powerful channel managing function in the world and this function allows
you to have a more interesting and useful operation as well as viewing channels simply.
Channel Manager
18
CHANNEL MANAGER
Favorite Channel
When you select channel manager, default
favorite list will be showed on the screen as
Favorite 1.
Select your favorite channel and then press OK
key. Then will be marked at rear of your
selected channel name.
And if you want to delete the channel name in the
favorite channel list, press OK key once again,
then the mark will be disappeared.
Move channel
19
CHANNEL MANAGER
Lock Channel
Rename Channel
20
CHANNEL MANAGER
Delete channel
In Main Page, press ● Edit (GREEN KEY) on
the RCU, and then select Delete on the command
menu.
Sort Method
21
EPG (Electronic Program Guide)
22
Timer
Time Adjust
Time Reservation
23
HARD DISK RECORDER
STB is equipped with a hard disk and allows you to record current programs while playing back
earlier recordings simultaneously. Also it makes you free from one-way broadcast times
through time-shift function. When you need to leave your seat on urgent business, you can
playback from the paused screen with time delay after come back and also STB enables you
can determine the start time of a program you want independent of the broadcast time
Time-Shift mode
1) Recording
24
HARD DISK RECORDER
- FF, REW
If you press F.F key repeatedly, the recorded
program plays forward in x4, x8, x16 speed than
normal speed and, press REW key repeatedly,
the recorded program plays backward x4, x8, x16
speed than normal speed.
In that case, you can check the speed as the
mark >, >>, >>>,>>>> in the upper left side
on the screen.
- Pause
If you want to playback the recorded program
step by step, press PAUSE key repeatedly.
25
HARD DISK RECORDER
★ Info-Bar
Playback mode
1) Playback
If you press PLAY key on the RCU, then File List
is displayed in the top right corner. Then you
can freely select and playback a file on screen
after pressing OK key on the RCU. While you
are watching recorded channel, PLAY will be
displayed in the front panel by seven segment.
2) Slow playback
If you press PLAY key, the recorded program
plays in normal speed and if you press PLAY
key again, it plays in slow speed.
26
HARD DISK RECORDER
3) FF, REW, Pause, Jump
If you want to playback the recorded program step
by step, press PAUSE key repeatedly. If you press
F.F key repeatedly, the recorded program plays
forward in x4, x8, x16 speed than normal speed and,
press REW key repeatedly, the recorded program
plays backward x4, x8, x16 speed than normal
speed.
In addition, you can move fast to where you want to
playback by press key on the RCU when the
info-bar is displayed on the screen.
If you press Stop button, it exits from Playback
mode and goes to Live mode.
Timer Recording
EPG Recording
27
HARD DISK RECORDER
File List
If you press PLAY key on the RCU in the live
mode, the file list consisted of recording channel
will be displayed on the screen.
HDD Manager
Move
Lock
28
HARD DISK RECORDER
Rename
Delete
Skip
29
HARD DISK RECORDER
Split
You can cut two files and patch them into one file.
Merge
Format HDD
7-Segment Display
30
HARD DISK RECORDER
STB is equipped with a hard disk and allows you to watch one cable channel while
recording same cable channel in same TP. And it allows you to record current programs
while playing back earlier recordings simultaneously. Also it makes you free from one-way
broadcast times through time-shift function. When you need to leave your seat on urgent
business, you can playback from the paused screen with time delay after come back and also
STB enables you can determine the start time of a program you want independent of the
broadcast time
1) Recording
2) Watching
31
HARD DISK RECORDER
Pre Recording MODE
1) Pre Recording
32
GAME
GAME
1) SNAKE
2) MINE SWEEPER
3) CRAZY TETRIS
33
Receiver Information
34
TROUBLE SHOOTING
Problem Possible causes What to do
The display on the front panel Main cable is not connected. Check that the main cable is
does not light up. plugged into the power socket.
No sound or picture, but the The Receiver is in standby Press the standby button.
front panel shows red light. mode.
No sound or picture. cable antenna is not pointing Adjust the antenna. Check the
at the transmitter of the signal level in the manual
broadcast. search menu.
Bad picture / blocking error. cable antenna is not Adjust the antenna.
pointing at the cable.
35
TROUBLE SHOOTING
Problem Possible causes What to do
Note : If you have tried all of the actions suggested above, without solving the problem,
please contact your dealer or service provider.
36