Documente Academic
Documente Profesional
Documente Cultură
Question 1.
If x[n] = ( 31 )|n| − ( 12 )n u[n], then find the Z-transform of x[n] and ROC in the z-plane.
Question 2.
Question 3.
Determine the initial and final values of x[n] for each of the following:
5
2z(z − 12 )
(a) X(z) = , |z] > 1/2
(z − 2 )(z − 31 )
1
z
(b) X(z) = 2 , |z| > 1
2z − 3z + 1
Question 4.
Consider a causal discrete-time system whose output y[n] and input x[n] are related by:
(a) Find its system function H(z). (b) Find its impulse response h[n].
Question 5.
2 + z −2 + 3z −4
X(z) = , |z| > 0
z 2 + 4z + 3
Question 6.
1
Digital Signal Processing (DSP) (EE455/EE3403) Assignment Set 2
Question 7.
Question 8.
Lets consider two analog signals: x1 (t) (band-limited to 5 kHz) and x2 (t) (band-limited to 7 kHz).
Find the minimum sampling frequency of the following signals for aliasing free reconstruction:
Question 9.
The output y(t) of the following system (as shown Figure) has to be sampled. What is the minimum
sampling rate required to uniquely reconstruct y(t) from its samples?
Digital Signal Processing (DSP) (EE455/EE3403) Assignment Set 2
Question 10.
An input signal x(t) = 2 + 5 sin(100πt) is sampled with a sampling frequency of 400 Hz and applied
to the system whose transfer function is represented by:
Y (z) 1 1 − z −N
=
X(z) N 1 − z −1
where N represents the number of samples per cycle. Determine the output y[n] of the system
under steady state condition.