Documente Academic
Documente Profesional
Documente Cultură
it
MS.90040
XIONG RUOHUA - ruohua.xiong@fcagroup.com
Date: 29-MAY-2014
Co-Author
Author
HARMONIZED DOCUMENT
FCA ITALY -- GROUP MATERIALS LABS (CRF) - POLYMERS & GLASS
ANY PRINTED COPY IS TO BE DEEMED AS UNCHECKED; THEREFORE THE UPDATED COPY MUST BE CHECKED IN THE APPROPRIATE WEB SITE
CONFIDENTIAL
THIS DOCUMENT MUST NOT BE REPRODUCED OR CIRCULATED TO THIRD PARTIES WITHOUT PRIOR WRITTEN CONSENT BY FIAT GROUP AUTOMOBILES SPA
AND CHRYSLER GROUP LLC..
IN CASE OF DISPUTE, THE ONLY VALID REFERENCE IS THE ENGLISH EDITION
FIATGROUP AUTOMOBILES SPA Page 2/4
CHRYSLER GROUP LLC MS.90040
Change Level: -
Conditions of Usage
This harmonized specification is divided into two parts. The requirement on which part is to be followed is
indicated below or can be specified directly in the component Product Sheet or in the Drawing.
Part A: This part has to be applied whenever the component will be part of a vehicle that will be sold in
the NAFTA market, or whenever the climatic conditions of the sales market require it.
MS-AY-335 (Chrysler)
Part B: This part has to be applied whenever the component will be part of a vehicle that will be
commercialized ONLY in the EMEA, LATAM or APAC markets, or whenever the restrictions of Part A are
not required.
955260/01(Fiat)