Documente Academic
Documente Profesional
Documente Cultură
: Title 5
Brayan
InformeDanilo
deOrtiz,702305 – bdortiz05@ucatolica.edu.co
Laboratorio: Instrumentación
Eléctrica y Ley de Ohm
Informe de Laboratorio: UTILIZAR LA TOLERANCIA COMO LA INCERTIDUMBRE DE LA
Resumen-Este laboratorio realizado consta de realizar RESISTENCIA.
dos tipos de conexiones con 3 resistencias, una
conexión en paralelo y una en serie utilizando las
mismas resistencias para los dos montajes, esto con el
fin de hallar por medio de distintos métodos el valor que
suponemos no conocerlo de la Resistencia total, una vez
témenos claro el proceso general, se realiza la conexión
en paralelo y en serie por separado y mediante la
medición directa de un multímetro, por ajuste lineal y por
calculo teórico (ley de ohm)se puede verificar el de la
resistencia total con el fin de poder deducir cual es
mejor
I.INTRODUCCIÓN
Se estudia la relación entre el voltaje y la corriente eléctrica de
resistencias que obedecen la ley de Ohm. Para este efecto el
TABLA 1 :CÓDIGO DE COLORES RESISTORES
estudiante debe adquirir habilidades para manejar adecuadamente tres
elementos necesarios para el montaje de los circuitos y para la LA INTENSIDAD DE CORRIENTE QUE ATRAVIESA UN
medición de las variables físicas. CIRCUITO ES DIRECTAMENTE PROPORCIONAL AL VOLTAJE O
TENSIÓN DEL MISMO E INVERSAMENTE PROPORCIONAL A LA
El primer elemento es la resistencia eléctrica y la lectura de su RESISTENCIA QUE PRESENTA.
valor nominal. El segundo elemento, el protoboard como soporte para
el ensamblaje de los circuitos eléctricos, extendidamente utilizado en EN FORMA DE FRACCIÓN SE PONE DE LA SIGUIENTE FORMA:
el área de electrónica. Finalmente el multímetro para medir la
magnitud del voltaje, la corriente eléctrica y la resistencia eléctrica.
II.OBJETIVOS
1. reconocer los diferentes elementos que componen una DONDE I ES LA INTENSIDAD QUE SE MIDE EN AMPERIOS
medición de una resistencia (A), V EL VOLTAJE QUE SE MIDE EN VOLTIOS (V); Y R LA
2. calcular las resistencias por varios métodos directos e RESISTENCIA QUE SE MIDE EN OHMIOS (Ω).
indirectos
3. Reconocer la dependencia del voltaje con la corriente
eléctrica en resistencias que obedecen la ley de Ohm. IV. RECURSOS UTILIZADOS
4. Calcular el valor experimental de la resistencia eléctrica MULTÍMETRO
con su respectiva incertidumbre por diferentes PROTOBOARD
procedimientos. RESISTENCIA 270,470,820
5. Desarrollar destrezas para la elaboración y presentación de PC
informes que contribuyan en el perfeccionamiento de CALCULADORA
su perfil profesional y ocupacional.
V. PROCEDIMIENTO EXPERIMENTAL
III. MARCO TEÓRICO
EL VALOR NOMINAL TEÓRICO DE UN RESISTOR ESTÁ DADO
POR EL CÓDIGO DE COLORES. EN TAL CASO SE PUEDE
1. COLOQUE LOS RESISTORES EN EL PROTOBOARD DE
MANERA QUE SUS ALAMBRES DE CONEXIÓN ESTÉN
Como ejemplo se ilustra un resistor con sus franjas de LIBRES Y FÁCILMENTE ACCESIBLES. PARA MEDIR
colores. Para este resistor la resistencia eléctrica al RESISTENCIA, SIMPLEMENTE SE DEBE CONECTAR
comparar con la tabla 1 corresponde a: café-negro-rojo - EL MULTÍMETRO EN FUNCIÓN OHMÍMETRO (Ω) EN
oro 1 ó ×102 tolerancia 5% 10×102 1000Ω tolerancia 5% PARALELO CON EL RESISTOR COMO SE INDICA EN
LA FIGURA 1:
.
First Author et al.: Title 5
66813,5699 7,86E-
0,1590215 254,4025 258,4931801 1 78,6 6 12,03
02
84621,8016 9,25E-
0,2019828 322,9209 290,9095068 4 92,5 7 14,04
02
103909,839
0,2487264 397,2049 322,3629723 9
1,06E-
106,2 8 16,03
125289,907 01
0,301563 479,61 353,9769147 8 1,21E-
120,5 9 18,02
1,259674 2012,663 529054,22 01
9 8 11 1 1,36E-
136,3 20,20
0 01
1 1,50E-
149,8 22,00
1 01
Sumato 1 132,3 8,79E-
ria 1 4 01
Cuadro IV
Datos obtenidos Voltaje (x) y corriente (y) con
notación científica
Residuale
Y
XY X^2 s
Estimado
(Yr-Ye)^2
34,948907 1220,5176
0,02626 4,0804
33 21
0,10254 66,562849 4427,1922
15,9201
3 72 92
Figura 2. Grafica del ajuste lineal con su respectiva ecuación 0,23318 98,979176 9789,1980
36,1201
8 42 87
VI-B SE REALIZA UN MONTAJE DE RESISTENCIAS EN 0,41416 130,59311 17041,009
63,6804
PARALELO CON VALORES 270 Ω,470 Ω ,820 Ω COMO SE 2 88 81
MUESTRA EN LA FIGURA. SE SUBE GRADUALMENTE EL 0,65430 100,400 163,33039 26655,492
VOLTAJE Y SE OBTIENE UN VALOR DE CORRIENTE EL CUAL 6 4 92 63
SE REGISTRA EN EL CUADRO IV 0,94555 144,720 195,58624 38223,240
8 9 91 85
227,84209 51869,879
1,2987 197,1216
89 81
1,70238 256,960 259,77699 67428,921
6 9 5 8
324,720 291,71189 85025,539
2,17141
4 12 39
326,69584 106641,13
2,75326 408,04
77 82
355,58168 126331,82
3,2956 484
34 37
13,5973 2035,76 534653,95
73 52 42
I X Y
1,30E-
13,0 1 2,02
02
2,57E-
25,7 2 3,99
02
3,88E-
38,8 3 6,01
02
5,19E-
51,9 4 7,98
02
6,53E-
65,3 5 10,02
02
First Author et al.: Title 5
Cuadro IV the line, in square brackets, inside the punctuation. Multiple references
Datos obtenidos Voltaje (x) y corriente (y) con are each numbered with separate brackets. When citing a section in a
notación científica book, please give the relevant page numbers. In text, refer simply to the
reference number. Do not use “Ref.” or “reference” except at the
beginning of a sentence: “Reference [3] shows ... .” Please do not use
automatic endnotes in Word, rather, type the reference list at the end of
VII. CONCLUSION the brief using the “References” style.
Reference numbers are set flush left and form a column of their
A conclusion section is not required. Although a conclusion may own, hanging out beyond the body of the reference. The reference
review the main points of the brief, do not replicate the abstract as the numbers are on the line, enclosed in square brackets. In all
conclusion. A conclusion might elaborate on the importance of the references, the given name of the author or editor is abbreviated to
work or suggest applications and extensions. the initial only and precedes the last name. Use them all; use et al.
only if names are not given. Use commas around Jr., Sr., and III in
APPENDIX names. Abbreviate conference titles. When citing IEEE transactions,
Appendixes, if needed, appear before the acknowledgment. provide the issue number, page range, volume number, year, and/or
month if available. When referencing a patent, provide the day and
ACKNOWLEDGMENT the month of issue, or application. References may not include all
information; please obtain and include relevant information. Do not
The preferred spelling of the word “acknowledgment” in
combine references. There must be only one reference with each
American English is without an “e” after the “g.” Use the singular
number. If there is a URL included with the print reference, it can be
heading even if you have many acknowledgments. Avoid expressions
included at the end of the reference.
such as “One of us (S.B.A.) would like to thank ... .” Instead, write
Other than books, capitalize only the first word in a brief title,
“F. A. Author thanks ... .” In most cases, sponsor and financial
except for proper nouns and element symbols. For briefs published in
support acknowledgments are placed in the unnumbered footnote on
translation journals, please give the English citation first, followed by
the first page, not here.
the original foreignlanguage citation See the end of this document
disclosed, a brief must contain new, useable, and fully described
Basic format for books (when available online):
information. For example, a specimen’s chemical composition
J. K. Author, “Title of chapter in the book,” in Title of Published Book, xth ed.
need not be reported if the main purpose of a brief is to
City of Publisher, State, Country: Abbrev. of Publisher, year, ch. x, sec. x, pp.
introduce a new measurement technique. Authors should expect xxx–xxx. [Online]. Available: http://www.web.com
to be challenged by reviewers if the results are not supported by
Examples:
adequate data and critical details. [10] G. O. Young, “Synthetic structure of industrial plastics,” in
4) Briefs that describe ongoing work or announce the latest Plastics, vol. 3, Polymers of Hexadromicon, J. Peters, Ed.,
technical achievement, which are suitable for presentation at a 2nd ed. New York, NY, USA: McGrawHill, 1964, pp. 15
professional conference, may not be appropriate for publication. 64. [Online]. Available: http://www.bookref.com.
[11] The Founders’ Constitution, Philip B. Kurland and Ralph
REFERENCES Lerner, eds., Chicago, IL, USA: Univ. Chicago Press, 1987.
[Online]. Available: http://press
pubs.uchicago.edu/founders/
Basic format for books:
[12] The Terahertz Wave eBook. ZOmega Terahertz Corp.,
J. K. Author, “Title of chapter in the book,” in Title of His Published Book,
2014. [Online]. Available: http://dl.z
xth ed. City of Publisher, (only U.S. State), Country: Abbrev. of Publisher,
thz.com/eBook/zomega_ebook_pdf_1206_sr.pdf. Accessed
year, ch. x, sec. x, pp. xxx–xxx.
on: May 19, 2014.
Examples:
[13] Philip B. Kurland and Ralph Lerner, eds., The Founders’
[1] G. O. Young, “Synthetic structure of industrial plastics,” in
Constitution. Chicago, IL, USA: Univ. of Chicago Press,
Plastics, 2nd ed., vol. 3, J . Peters, E d . New Y o r k , NY,
1987, Accessed on: Feb. 28, 2010, [Online] Available:
USA: McGrawHill, 1964, pp. 15–64.
http://presspubs.uchicago.edu/
[2] W.K. Chen, Linear Networks and Systems. Belmont,
founders/
CA, USA: Wadsworth, 1993, pp. 123–135.
corporate productivity. Presented at INET96 Annual Examples:
Meeting. [Online]. Available: [18] R. J. Hijmans and J. van Etten, “Raster: Geographic
http://home.process.com/Intranets/wp2.htp analysis and modeling with raster data,” R Package Version
2.012, Jan. 12, 2012. [Online]. Available: http://CRAN.R
Basic format for reports and handbooks (when available project.org/package=raster
online): [19] Teralyzer. Lytera UG, Kirchhain, Germany [Online].
J. K. Author. “Title of report,” Company. City, State, Country. Rep. no., Available: http://www.lytera.de/Terahertz_THz_
(optional: vol./issue), Date. [Online] Available: site/path/file Spectroscopy.php?id=home, Accessed on: Jun. 5, 2014
8 First Author et al.:
Title