Documente Academic
Documente Profesional
Documente Cultură
Introduction
1.application
This product integrates the fuction of distirbution with splitting,suitabel for the straight through or branch
connection,and distrubtion connection in optical ststem,as well as protection connection for cabels and distribution
pigtails
It’s designed as the three layers structure,used for splitting and splicing,with the middle panel≥180
Easy for installation and maintenance. The middle panel is optional for different users,without it,it
could be used as a splice closure.
Splicing Splitting(For tube PLC) Splitting(sub-rack PLC)
2. Specification
High impact plastic,standard user interface,repeated
Suitable for 2x1:8 sub-rack PLC splitter,or 2pcs of tube PLC splitter
Anti-UV,shocking resistance,and waterproof
Unique middle panel≥180°,clear area for splicing and distribution,less cross-connection for
cables
Suitable for un-cut cables
Dimension Cable diameter Cable ports Tray quatity
Model Splitting ratio Max capacity
(mm) (mm)
GJS(06)C
290*190*90 2 in 2 out 24(single 3 72 single cores
(Splicing) cores)
Operation manual
2. Strip and clean the cable, keep it 1.6m long and 30-
1. Open the box,install the sub-rack PLC
splitter by band as picture 50mm long of the strength member, and insert cable
through inlet,fix it by cable clamp,and fix strength member
by special clamp. Put the cable in the splice tray,and patch
the excess cable in the bottom.
3. Put the input of PLC splitter in the tray and splice with pigtail,install the PVC cover.
4. Plug the outgoing pigtails,and install the 5.Close the cover by clips.
pigtails in the rubber slot,and fix it by
sealing rubber.
6.Splicing: Strip and clean the cable, keep it 1.6m long and 30-50mm long of the strength member. Take the
cable to the inlet,fix it by cable clamp,and fix the strength member by special clamp. Put the cable in the splice
tray,and splice, patch the excess cable in the bottom.
Page 2
Techinical data
Fiber bend radius:≥40mm
Splicet tray excess loss:≤0.01dB
Temperature Range : - 40℃ + 60℃
Anti lateral pressure : ≥2000N / 10 cm
Shock resistance:≥20N.m
IP65
Packing list
Body 1 set