Documente Academic
Documente Profesional
Documente Cultură
INTRODUCTION:
• The MOSFET (Metal Oxide Semiconductor Field Effect Transistor) transistor is a
semiconductor device which is widely used for switching and amplifying
electronic signals in the electronic devices.
• The MOSFET is a four terminal device with source(S), gate (G), drain (D) and
body (B) terminals. The body of the MOSFET is frequently connected to the
source terminal so making it a three terminal device like field effect transistor.
• Below are the guides on how to know if MOSFET is defective. These are the
most common techniques that can be used to check if MOSFET is defective.
method #1:
A
• First turn ON digital multimeter and select continuity mode.
• Connect the test leads to the MOSFET terminals. Keep test leads connected for a
few seconds at like this (A) connection.
• if multimeter buzzer is ON, the MOSFET is bad(damage) conditions.
B
• Connect the test leads to the MOSFET terminals. Keep test leads connected for a
few seconds at like this (B) connection.
• if multimeter buzzer is OFF, the MOSFET is good conditions.
method #2:
N-Channel MOSFET :
C
• After the connection(C) is complete, when you press the switch(LED ON Switch) -
if LED is ON, the IGBT is good. else, LED is OFF, the IGBT is bad.
• when you press the switch(LED OFF Switch) - if LED is OFF, the IGBT is good.
else, the IGBT is bad.
P-Channel MOSFET :
E
• After the connection(E) is complete, when you press the switch(LED ON Switch) -
if LED is OFF, the IGBT is good. else, LED is ON, the IGBT is bad.
• when you press the switch(LED OFF Switch) - if LED is ON, the IGBT is good.
else, the IGBT is bad.