Documente Academic
Documente Profesional
Documente Cultură
STANDBY/ON
SOUND AUDIO
TV VCR
CENTER SUBWOOFER
1 2 3 4
REAR-L REAR-R
5 6 7 8
TEST CLEAR SETTING FM MODE
9 0
DVD FM/AM AUX PROGRESSIVE
AUDIO VOL
TOP
MENU MENU
ENTER
CHOICE ON SCREEN
SLEEP
RM-STHA35J
DVD THEATER SYSTEM
COMPACT D I G I T A L
D I G I T A L • E X
SUPER VIDEO SURROUND P R O L O G I C
VOLUME
STANDBY
PHONES
STANDBY/ON
D V D D I G I TA L T H E AT E R S Y S T E M T H - A 3 5
XV-THA35
COMPACT D I G I T A L
D I G I T A L • E X
SUPER VIDEO SURROUND P R O L O G I C
VOLUME
STANDBY
STANDBY/ON
D V D D I G I TA L T H E AT E R S Y S T E M T H - A 3 2
XV-THA32
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1009-001C
[J]
CAUTION
To reduce the risk of electrical shocks, fire, etc.: IMPORTANT FOR LASER PRODUCTS
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture. 1. CLASS 1 LASER PRODUCT
2. CAUTION: Visible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
Caution –– STANDBY/ON switch! serviceable parts inside the Unit; leave all servicing to
Disconnect the mains plug to shut the power off completely. The qualified service personnel.
Spacing 15 cm or more
Caution: Proper Ventilation XV-THA35/
To avoid risk of electric shock and fire and to protect from damage. Wall or obstructions XV-THA32
Locate the apparatus as follows: Front
Front: No obstructions open spacing.
Sides: No obstructions in 10 cm from the sides.
Top: No obstructions in 10 cm from the top.
Stand height
Back: No obstructions in 15 cm from the back 15 cm or more
Bottom: No obstructions, place on the level surface.
In addition, maintain the best possible air circulation as illustrated.
Floor
G-1
1
EN01-09TH-A35[J].pm6 1 03.3.13, 2:03 PM
Parts Identification
Center Unit
1 2 3 4 5 6 7
VOLUME
STANDBY
PHONES
STANDBY/ON
D V D D I G I TA L T H E AT E R S Y S T E M
8 9 p q w
Front Panel
1 STANDBY/ON button and STANDBY lamp (12 – 17) 9 3/8, 7, 4, and ¢ buttons
2 Disc tray (12, 14) • Pressing 3/8 also turns on the power and changes the
3 Illumination lamp source to the DVD player.
4 Display window p SOURCE button (12, 14, 16, 18, 48)
5 VOLUME control (12, 14, 16) q SURROUND button (13, 15, 17, 19, 22)
6 Remote sensor w DSP button (13, 15, 17, 19, 22)
7 PHONES jack (19) (except TH-A32)
8 0 (open/close) button (12 – 15, 25, 41)
• Pressing this button also turns on the power and
changes the source to the DVD player.
Display Window
1 2 3 4 5 6 7 8 9 p q
3
L C R P–SCAN 8 TITLE TRK TUNED CHP PROG REPEAT 1 A–B
DIGITAL 3
LS S
ProLogic II CD kHz
RS
STEREO VCD MP3 MHz
w e r t
Display Window
1 Audio channel indicators 9 PROG (program) indicator (31, 38)
• Indicates audio channels currently source signal. p Repeat mode indicators (29, 30, 36, 37)
2 P-SCAN indicator (11) • REPEAT, 1, and A–B
3 Disc indicators (25) q Sleep indicator (20)
• DVD, CD, VCD, and MP3 w Sound signal indicators (21, 22)
4 Playback indicators • DIGITAL, PRO LOGIC II, and DTS
• 3 (play) and 8 (pause) e STEREO indicator (49)
5 TITLE indicator (25) r Main display
6 TRK (track) indicator (25) t Frequency unit indicators
7 TUNED indicator (16, 48) • MHz (for FM station) and kHz (for AM station)
8 CHP (chapter) indicator (25)
2
EN01-09TH-A35[J].pm6 2 03.2.3, 4:03 PM
Remote Control
See pages in the parentheses for details.
3
EN01-09TH-A35[J].pm6 3 03.2.3, 4:03 PM
Getting Started
General Precautions Before using the remote control, put two supplied batteries first.
• DO NOT insert any metal object into the center unit. • When using the remote control, aim the remote control directly at
• DO NOT disassemble the center unit or remove screws, covers, or the remote sensor on the center unit.
cabinet.
• DO NOT expose the center unit to rain or moisture. 1. On the back of the remote control, remove the
battery cover.
Locations
• Install the center unit in a location that is level and protected from
moisture.
• The temperature around the center unit must be between 5˚C and
35˚C (41˚F and 95˚F).
• Make sure there is good ventilation around the center unit. Poor
ventilation could cause overheating and damage the center unit.
4
EN01-09TH-A35[J].pm6 4 03.2.3, 4:03 PM
Connecting the FM and AM Antennas
AM Loop Antenna
(supplied)
S-VIDEO Y PB PR
Center unit
Note:
If the AM loop antenna wire is covered with vinyl, remove
the vinyl by twisting it as shown in the diagram.
5
EN01-09TH-A35[J].pm6 5 03.2.3, 4:03 PM
Getting Started
D I G I T A L • E X
SUPER VIDEO SURROUND P R O L O G I C
VOLUME
STANDBY
PHONES
STANDBY/ON
D V D D I G I TA L T H E AT E R S Y S T E M T H - A 3 5
Y
CENTER REAR FRONT
SUBWOOFER SPEAKER SPEAKERS SPEAKERS
AC IN RIGHT LEFT RIGHT LEFT
CAUTION CAUTION
SUBWOOFER IMPEDANCE SPEAKER IMPEDANCE
10 OHMS 6-8 OHMS
6
EN01-09TH-A35[J].pm6 6 03.2.3, 4:03 PM
Connecting the Speakers When setting the speakers
To obtain the best possible sound from this system, you need to
Connect the satellite speakers and subwoofer to the terminals on the place all the speakers except the subwoofer at the same distance
rear panel using speaker cords supplied. from the listening position with each front faced toward the listener.
Color labels are attached to the speaker cords to indicate the speaker Since bass sound is less-directional, but normally place it in
and the terminal to which each is to be connected. between right and left front speaker shown as below.
• The five satellite speakers can be used for any positions—center,
Subwoofer
front left and right, and rear left and right. Center speaker
• Connect the color labeled cord to the color (+) terminal, and the Right front
Left front speaker
other cord to the black (–) terminal respectively. speaker
CAUTION:
Use speakers with the SPEAKER IMPEDANCE indicated by the
speaker terminals.
Notes: CAUTION:
• If the speaker cord is covered with vinyl, remove the • When attaching the satellite speakers on the wall, have them
vinyl by twisting it as shown in the diagram. attached to the wall by a qualified person.
• Make sure the core wire of speaker cords do not DO NOT attach the satellite speakers on the wall by yourself to
expose to out of the terminals. This could cause avoid an unexpected damage of their falling from the wall, caused
short-circuit. by incorrect attachment or weakness in the wall.
• Care is required in selecting a location for attaching speakers to the
wall. Injury to personnel, or damage to equipment, may result if the
speakers are attached in a location which interferes with daily
activities.
7
EN01-09TH-A35[J].pm6 7 03.2.3, 4:03 PM
Getting Started
DBS Tuner
Before connecting an
optical digital cord, unplug
OPTICAL the protective plug.
DIGITAL IN
DIGITAL
OPTICAL OUT
MD Recorder
A
DBS Tuner
Center unit
A
N
ANALOG VIDEO OUT T
IN E
N AM
N COAXIAL
L FM 75 AM LOOP EXT
VIDEO A
MD Recorder
R
Y PB PR
S-VIDEO
Cassette Deck
AUDIO
LEFT
ANALOG
IN
L RIGHT
VCR
R
B OUT
TV
8
EN01-09TH-A35[J].pm6 8 03.2.3, 4:03 PM
TV connection
The S-video cord and the component video cord are not supplied with this system.
Use the cords supplied with another components or purchase them at an electric appliance store.
You can select one of three connection types— A , B , and C . • If your TV supports the progressive video input, you can enjoy a
high quality picture by making the progressive scanning mode
• If your TV has S-video (Y/C-separation) and/or component video
active (see page 11.)
(Y, PB, PR) jacks, connect them using an S-video cord (not
supplied) B and/or component video cord (not supplied) C .
By using these jacks, you can get a better picture quality—in the
order : Component video > S-video > Composite video.
• If you use the S-video cord to connect the TV, you select the
video signal type correctly. See “Picture Menu” on page 52.
VIDEO OUT
VIDEO B
S-VIDEO
TV
CENTER REAR FRONT A
SUBWOOFER SPEAKER SPEAKERS SPEAKERS N
ANALOG VIDEO OUT T
RIGHT LEFT RIGHT LEFT IN E
AC IN N AM
N COAXIAL
L FM 75 AM LOOP EXT
VIDEO A
S-VIDEO Y PB PR
Y PB PR
C
PB/CB
PR/CR
Now, you can plug the power cord of the center unit into the AC outlet.
Notes:
• Keep the power cord away from the connecting cords and the antenna cords. The power cord may cause noise or screen interference.
• Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.
9
EN01-09TH-A35[J].pm6 9 03.2.3, 4:03 PM
TV Setting
10
EN10-20TH-A35[J].pm6 10 03.2.3, 4:03 PM
Changing the Scanning Mode Adjusting the Pictures
You can select the scanning mode if your TV equipped with You can adjust parameters that affect the appearance of picture.
component video jacks supports the progressive video input. From the remote control ONLY:
1 Press CHOICE while playing back a
From the remote control ONLY: disc.
Video Enhance menu appears on TV-screen. CHOICE
1 Press DVD. DVD Video Enhance
Brightness
Edges
Color
Contrast
11
EN10-20TH-A35[J].pm6 11 03.2.3, 4:03 PM
Basic DVD Operations
TV
TV VCR
1 AUDIO Press 0 to open the disc tray, then place a DVD
CENTER SUBWOOFER
correctly with its label side up.
1 2 3 4
REAR-L REAR-R
5 6 7 8
TEST CLEAR SETTING FM MODE
9 0
4 Start Playback
MENU MENU
ENTER
Press 3.
CHOICE ON SCREEN
The disc tray closes. “READING” appears for a
77 43 while.
DOWN - TUNING - UP SLOW
• You can also start playback by closing the disc
tray using 0 on the front panel.
AUDIO SUB TITLE ANGLE ZOOM
12
EN10-20TH-A35[J].pm6 12 03.2.3, 4:03 PM
To turn off the sounds temporarily Note:
From the remote control ONLY: Before activating the Surround or DSP mode, adjust the speaker
MUTING setting to bring out the best performance from this system.
Press MUTING. For in-depth information about adjusting the speaker setting, see
“Setting Menu” on pages 53.
To restore the sound, press MUTING again.
• Pressing AUDIO VOL + or – also restores the sound.
When a disc encoded with the Dolby Digital or DTS Digital To close the disc tray, press 0 again.
Surround is loaded, the system detects it and starts playing the disc
automatically with Multichannel Surround activated.
– For in-depth information about surround modes, see “Creating
Realistic Sound Fields” on pages 21 to 22. To prohibit disc ejection
On the front panel ONLY:
Press and hold 6 and 4 for more than
Dolby Pro Logic II—Pro Logic II Music and Pro
3 seconds.
Logic II Movie
“LOCKED” appears on the display, and the
disc tray is locked.
To activate Pro Logic II modes
Press SURROUND. SURROUND To cancel the prohibition, press and hold
The current Pro Logic II mode appears on the display 6 and 4 for more than 3 seconds.
for a while. “UNLOCK” appears on the display, and the
• Each time you press the button, Pro Logic II mode disc tray is unlocked.
changes as follows:
PL II MUSIC PL II MOVIE
To turn off the power (into standby)
PL II OFF Press AUDIO (or STANDBY/ON on the front AUDIO
• When Dolby Pro Logic II mode is activated, the PRO LOGIC panel).
II indicator lights up on the display. The illumination lamp goes off and the STANDBY lamp
lights up.
– For in-depth information about Dolby Pro Logic II modes, see • If you press AUDIO (or STANDBY/ON on the front
“Creating Realistic Sound Fields” on pages 21 to 22. panel) while the disc tray is kept open, the disc tray closes
automatically, then the system is turned off.
• A small amount of power is consumed even in standby mode. To
DSP modes—CONCERT, STADIUM, HALL, turn the power off completely, unplug the AC power cord.
THEATER, LIVE HOUSE
13
EN10-20TH-A35[J].pm6 13 03.2.3, 4:03 PM
Basic VCD/CD Operations
3 Load a VCD/CD
1 2 3 4
REAR-L REAR-R
5 6 7 8
TEST CLEAR SETTING FM MODE
9 0
On the front panel ONLY:
2 DVD DVD FM/AM AUX PROGRESSIVE
Press 0 to open the disc tray, then place a disc
CONTROL TV/VIDEO SEARCH TV/VIDEO correctly with its label side up.
TV VCR
TV VOL MUTING REC/MEMORY MUTING
5 AUDIO VOL
AUDIO VOL
+/–
TOP
MENU MENU
ENTER
CORRECT INCORRECT
CHOICE ON SCREEN
RM-STHA35J
DVD THEATER SYSTEM
Press 3.
The disc tray closes. “READING” appears for a while.
• You can also start playback by closing the disc tray
• SVCD can be operated by using the VCD operation using 0 on the front panel.
procedure.
• For in-depth information about VCD/CD operations,
see pages 24, 25, and 34 to 39. 5 Adjust the Volume
1 Turn On the Power From the remote control :
To increase the volume,
AUDIO VOL
pressing TV/VIDEO. (If your TV is not a JVC’s, see “Operating To increase the volume,
Other Manufacturers’ TV” on page 57.) turn VOLUME control clockwise.
• For changing the OSD messages—the information on the TV To decrease the volume,
screen—into the desired language, see “ Language Menu” on turn VOLUME control counterclockwise.
pages 51.
CAUTION:
Press AUDIO AUDIO Always set the volume to the minimum before starting any source. If
(or STANDBY/ON on the front panel). the volume is set at its high level, the sudden blast of sound energy
The STANDBY lamp goes off and the illumination lamp can permanently damage your hearing and/or ruin your speakers.
on the center unit lights up. The source indication selected
previously appears on the display.
Notes:
• By pressing AUDIO VOL + or – repeatedly, you can adjust the
volume level step by step.
• The volume level can be adjusted within 64 steps—
“MIN (minimum),” 01 to 62 and “MAX (maximum).”
• If you have turned off the unit with the volume level set at more than
level “25,” the volume level will be automatically set at level “25” next
time you turn on the unit.
14
EN10-20TH-A35[J].pm6 14 03.2.3, 4:03 PM
To turn off the sounds temporarily
From the remote control ONLY:
7 Stop Playback
Press MUTING. MUTING Press 7 twice.
Playback stops completely.
To restore the sound, press MUTING again. • This system can memorize the end point even when
• Pressing AUDIO VOL + or – also restores the sound. you press 7 once. When you start playback again by
pressing 3, playback begins from where it has been stopped—
Resume play.
Note:
Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
“Setting Menu” on pages 53.
15
EN10-20TH-A35[J].pm6 15 03.2.3, 4:03 PM
Basic Tuner Operations
2 FM/AM
3 Adjust the Volume
DVD FM/AM AUX PROGRESSIVE
Notes:
• By pressing AUDIO VOL + or – repeatedly, you can adjust the
volume level step by step.
• The volume level can be adjusted within 64 steps—
“MIN (minimum),” 01 to 62 and “MAX (maximum).”
For in-depth information about tuner operations, see • If you have turned off the unit with the volume level set at more than
“Tuner Operations” on pages 48 to 49. level “25,” the volume level will be automatically set at level “25” next
time you turn on the unit.
16
EN10-20TH-A35[J].pm6 16 03.2.3, 4:03 PM
Notes:
AUDIO
• When an FM stereo program is received, the STEREO indicator
also lights up. To turn off the power (into standby)
• When you press the button repeatedly, the frequency changes step Press AUDIO (or STANDBY/ON on the front
by step.
panel) again.
The illumination lamp goes off and the STANDBY lamp lights up.
• A small amount of power is consumed even in standby mode. To
turn the power off completely, unplug the AC power cord.
5 Activate Surround or DSP Mode
You can enjoy Dolby Pro Logic II mode and DSP modes.
PL II MUSIC PL II MOVIE
PL II OFF
• When Dolby Pro Logic II mode is activated, the PRO LOGIC
II indicator lights up on the display.
Note:
Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
“Setting Menu” on pages 53.
17
EN10-20TH-A35[J].pm6 17 03.2.3, 4:03 PM
Other Basic Operations
Notes:
Enjoying Sounds from the External
• By pressing AUDIO VOL + or – repeatedly, you can adjust the
Component volume level step by step.
• The volume level can be adjusted within 64 steps—
You can enjoy sounds from the external equipment connected to the “MIN (minimum),” 01 to 62 and “MAX (maximum).”
• If you have turned off the unit with the volume level set at more
OPTICAL DIGITAL IN terminal or ANALOG IN jacks on the rear
than level “25,” the volume level will be automatically set at level
panel of the center unit.
“25” next time you turn on the unit.
18
EN10-20TH-A35[J].pm6 18 03.2.3, 4:03 PM
4 Activate Surround or DSP Mode Listening with the Headphones
You can enjoy three kinds of surround—Digital Multichannel (not available with TH-A32)
Surround (Dolby Digital and DTS Digital Surround), Dolby Pro
Logic II and DSP modes.
You can enjoy the sound with headphones.
Connect a pair of headphones to the PHONES jack on the front
Digital Multichannel Surround—Dolby Digital panel. The speakers are diactivated and you can listen the sound
and DTS Digital Surround with the headphones.
You can enjoy Dolby Digital or DTS Digital Surround when you • Disconnecting a pair of headphones from the PHONES jack
playback Multichannel source on the external equipment. activate speakers.
Dolby Pro Logic II—Pro Logic II Music and Pro Adjusting the Brightness
Logic II Movie
You can dim the indications on the display window and the
illumination lamps on the center unit.
To activate Pro Logic II modes
Press SURROUND. There is a time limit in doing the following steps. If the setting is
SURROUND
The current Pro Logic II mode appears on the canceled before you finish, start from step 1 again.
display for a while.
• Each time you press the button, Pro Logic II From the remote control ONLY:
mode changes as follows:
1 Press DIMMER repeatedly until DIMMER
3 Press ENTER.
Notes: “OK” appears on the display and the
• On some source signals, no sounds come out from the subwoofer. brightness level changes. ENTER
• Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
“Setting Menu” on pages 53.
19
EN10-20TH-A35[J].pm6 19 03.3.13, 2:09 PM
Other Basic Operations
TOP
MENU MENU
3/2 When the shut-off time comes, the system turns off
ENTER automatically.
ENTER
CHOICE ON SCREEN
RM-STHA35J
DVD THEATER SYSTEM
To cancel the Sleep Timer
Press cursor 3/2 repeatedly until “SLEEP OFF” appears on
the display in procedure above, then ENTER.
DIMMER* SLEEP**
20
EN10-20TH-A35[J].pm6 20 03.2.3, 4:03 PM
Creating Realistic Sound Fields
You can use the following surround to reproduce a realistic sound ■ DTS Digital Surround**
field.
Used to reproduce multichannel sound tracks of the software
• Dolby Surround
encoded with DTS Digital Surround ( ).
• Dolby Pro Logic II
• Dolby Digital
DTS Digital Surround is another discrete 5.1 channel digital audio
• DTS Digital Surround
format available on CD, LD, and DVD software.
• DSP modes
Compared to Dolby Digital, audio compression rate is relatively low.
This fact allows DTS Digital Surround format to add breadth and
depth to the reproduced sounds. As a result, DTS Digital Surround
7 Dolby Surround features natural, solid and clear sound.
Dolby Pro Logic II*
Dolby Pro Logic II has newly developed multichannel playback When the system detects DTS Digital Surround signals, the
format to decode the 2 channel sources—stereo analog source, indicator lights up on the display.
Linear PCM digital source, and Dolby Surround encoded source—
into 5.1 channel.
Matrix-based encoding/decoding method for Dolby Pro Logic II
makes no limitation for the cutoff frequency of the rear treble and Exapmle:
enables stereo rear sound compared to conventional Dolby Pro Indications on the display for each surround
Logic.
Dolby Pro Logic II enables to reproduce spacious sound from • Dolby Digital
8
original sound without adding any new sounds and tonal colorations. L C R
DIGITAL AUDIO 3
TITLE TRK TUNED CHP PROG EON RDS REPEAT 1 A–B
ProLogic II CD MHz
Dolby Pro Logic II has two modes—Movie mode and Music mode: LS S RS
STEREO VCD MP3 kHz
You can enjoy sound field very close to the one created with discrete • DTS Digital Surround
8
5.1 channel sounds. L C R
3
AUDIO
TITLE TRK TUNED CHP PROG EON RDS REPEAT 1 A–B
ProLogic II CD MHz
Pro Logic II Music (PL II MUSIC)—suitable for reproduction of LS S RS
STEREO VCD MP3 kHz
any 2 channel stereo music sources. You can enjoy wide and deep
sound by using this mode.
• When Dolby Pro Logic II is activated, the PRO LOGIC II • Dolby Pro Logic II Music
indicator lights up on the display window. L R 8 TITLE TRK TUNED CHP PROG EON RDS REPEAT 1 A–B
DIGITAL AUDIO 3
ProLogic II CD MHz
STEREO VCD MP3 kHz
7 Dolby Digital*
Used to reproduce multichannel soundtracks of the software • Dolby Pro Logic II Movie
encoded with Dolby Digital ( ). L R 8 TITLE TRK TUNED CHP PROG EON RDS REPEAT 1 A–B
DIGITAL AUDIO 3
Dolby Digital 5.1 ch (DOLBY D) encoding method (so-called ProLogic II CD MHz
STEREO VCD MP3 kHz
discrete multichannel digital audio format) records and digitally
compresses the left front channel, right front channel, center
channel, left rear channel, right rear channel, and LFE channel • DSP
signals. L C R 8 TITLE TRK TUNED CHP PROG EON RDS REPEAT 1 A–B
DIGITAL AUDIO 3
Since each channel is completely independent from the other ProLogic II CD MHz
STEREO VCD MP3 kHz
channel signals to avoid interference, you can obtain much better
sound quality with much stereo and surround effects.
Note:
Dolby Digital software can be roughly grouped into two categories—
multichannel (up to “5.1” channel) and 2 channel software. To enjoy
surround sounds while playing Dolby Digital 2 ch software, you can
use Dolby Pro Logic II.
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro ** “DTS” and “DTS Digital Surround” are registered trademarks of
Logic,” and the double-D symbol are trademarks of Dolby Digital Theater Systems, Inc.
Laboratories. Confidential unpublished works. ©1992–1997 Dolby
Laboratories. All rights reserved.
21
EN21-23TH-A35[J].pm6 21 03.2.3, 4:03 PM
Creating Realistic Sound Fields
Analog ⳯ 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬
Input Signal format
Linear PCM ⳯ 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬
Dolby Digital
Multichannel 䡬 ⳯ ⳯ ⳯ ⳯ ⳯ ⳯ ⳯ —
Dolby 2ch ⳯ 䡬 䡬 䡬 䡬 䡬 䡬 䡬 䡬
DTS Digital
䡬 ⳯ ⳯ ⳯ ⳯ ⳯ ⳯ ⳯ —
Surround
DTS 2ch ⳯ ⳯ ⳯ ⳯ ⳯ ⳯ ⳯ ⳯ 䡬
MP3 ⳯ ⳯ ⳯ ⳯ ⳯ ⳯ ⳯ ⳯ 䡬
22
EN21-23TH-A35[J].pm6 22 03.3.13, 2:12 PM
• The test tone comes out of the speakers in the following order:
RM-STHA35J
DVD THEATER SYSTEM
6 Press SOUND again. SOUND
“SOUND OFF” appears on the display.
L C R
SW
LS RS
23
EN21-23TH-A35[J].pm6 23 03.2.13, 3:25 PM
Disc Introduction—DVD/VCD/CD
This system has been designed to play back the following discs: DVD, IMPORTANT: Before performing any operations, make sure of
Video CD, Super Video CD (SVCD), Audio CD, CD-R, and CD-RW. the following....
• This system can also play back MP3 and JPEG files recorded on • Check the connection with the TV.
CD-Rs and CD-RWs. For in-depth information about MP3, see • Turn on the TV and select the correct input on the TV to view the
“MP3 Playback” on page 40, and about JPEG, see “JPEG pictures or on-screen indications on the TV screen.
Playback” on page 44. • For DVD playback, you can change the Setup menu setting to
your preference. (See pages 50 to 55.)
Discs you can play:
If “ ” appears on the TV screen when pressing a button,
Disc Mark Video Region Code
the disc cannot accept an operation you have tried to do, or
Type (Logo) Format Number*
information required for that operation is not recorded in the disc.
NOTICE : In some cases, without showing “ ,” operations will
DVD 1 not be accepted.
Video ALL
24
EN24-33TH-A35[J].pm6 24 03.2.3, 4:03 PM
Basic Disc Operations
Note:
If “Password – – – –” and “Parental Locked” appear on the TV screen,
SOUND
STANDBY/ON
AUDIO
Parental Lock is in use. You cannot play back a DVD containing violent
TV VCR scenes or those not suitable for your family members.
To play back such a disc, cancel the Parental Lock. (See page 55.)
CENTER SUBWOOFER Number
1 2 3 4 buttons
REAR-L REAR-R To stop playback for a moment
5 6 7 8
TEST CLEAR SETTING FM MODE Press 8.
9 0
DVD FM/AM AUX PROGRESSIVE • To resume play, press 3.
CONTROL TV/VIDEO SEARCH
TV VCR
TV VOL MUTING REC/MEMORY
To go to another chapter or track
AUDIO VOL Press ¢ or 4 repeatedly during playback.
• ¢ : Skips to the beginning of the next or
TOP
MENU MENU succeeding chapter or track.
• 4 : While an MP3 is played back
ENTER Goes back to the beginning of the previous track.
ENTER
While a DVD, a CD, or a VCD is played back
3 Goes back to the beginning of the current or previous
CHOICE ON SCREEN
chapter or track.
7 8
4/ ¢ DOWN - TUNING - UP SLOW
To go to another track (only possible on a CD
AUDIO SUB TITLE ANGLE ZOOM and VCD without PBC) directly using the
number buttons
CENTER SUBWOOFER
SVCD can be operated by using the VCD operation Pressing the number buttons during play 1 2 3 4
procedure. allows you to start playing the track number REAR-L REAR-R
you want. 5 6 7 8
TEST CLEAR SETTING
To start playback 9 0
• To select number 1 to 9, press the
Press 3. corresponding number button, then press
The source is automatically changed to the DVD ENTER.
player. • To select number 15, press 1, 5, then press
“READING” appears on the display for a while, then the detected ENTER
ENTER.
disc type appears—DVD, VCD, CD, MP3 or JPEG. (If your TV is • To cancel a mis-entry, press CLEAR.
turned on, the detected disc type appears on the TV screen.)
• When a disc is not loaded, “NO DISC” appears on the display. To stop during playback
Press 7.
Example:Playback information on the display
DVD L C R 8 TITLE TRK TUNED CHP PROG EON RDS REPEAT 1 A–B
When a DVD, a VCD, or a CD is played back
DIGITAL AUDIO 3
LS S RS
ProLogic II CD
STEREO VCD MP3
MHz
kHz
Playback stops (If your TV is turned on, “7 Resume
Stop” appears on the TV screen.)
• This system can memorize the end point even when you press
Title No. Chapter No. Elapsed playing 7. When you start playback again by pressing 3, playback
time begins from where it has been stopped—Resume play.
VCD/CD L C R 8
3
TRK TUNED PROG EON RDS REPEAT 1 A–B • To stop completely, press 7 twice. (“7 Stop” appears on the
AUDIO
MP3 ProLogic II CD
STEREO VCD MP3
MHz
kHz TV screen.) The disc type appears on the display.
When an MP3 disc or JPEG disc is played back
Disc Type Track No. Elapsed playing Playback stops.
time • This system can memorize the end point even when you press
JPEG 8
7. When you start playback again by pressing 3, playback
C TRK TUNED PROG EON RDS REPEAT 1 A–B
3
ProLogic II MHz begins from the beginning of the stopped track—Resume play.
LS RS
STEREO kHz
Note:
If you open the disc tray or turn off the unit, the resume play is
File No.
canceled.
25
EN24-33TH-A35[J].pm6 25 03.3.13, 2:21 PM
DVD Playback
SOUND
STANDBY/ON You can use some functions through the on-screen menu.
AUDIO
TV VCR
From the remote control ONLY:
CENTER SUBWOOFER
1 2 3 4
7 Whenever a disc is loaded.
REAR-L REAR-R Press ON SCREEN.
5 6 7 8 On-screen menu appears on the TV.
TEST CLEAR SETTINGFM MODE
9 0 Play Mode ON SCREEN
DVD FM/AM AUX PROGRESSIVE
Mode Off
Repeat Off
CONTROL TV/VIDEO SEARCH Off
TV VCR
Repeat A–B
TV VOL MUTING REC/MEMORY OSD Off
OK
AUDIO VOL
TOP
To turn off the on-screen menu
MENU MENU
Press ON SCREEN again.
5/∞
ENTER
ENTER
ON SCREEN Showing the Information on the TV Screen
CHOICE ON SCREEN
You can show the following information on the TV screen while a
DOWN - TUNING - UP SLOW
disc is loaded.
AUDIO AUDIO SUB TITLE ANGLE ZOOM ANGLE From the remote control ONLY:
SUB TITLE RETURN DIMMER DSP SURROUND 1 Press ON SCREEN.
SLEEP The on-screen menu appears on TV-screen.
For basic disc operations such as inserting a disc, starting To turn off the disc information
playback, and moving to another chapters, see “Basic DVD 1) Press ENTER repeatedly to select “Off” in step 3.
Operations” on pages 12, 13, and “Basic Disc Operations” on 2) Press cursor 5/∞ to select “OK”, then press ENTER.
page 25.
26
EN24-33TH-A35[J].pm6 26 03.2.3, 4:03 PM
Disc information Selecting the Audio Languages
OSD: On
1 While playing back a DVD containing audio languages (sound
00:01:16 01:40:45 track), you can select the language (sound track) to listen to.
• You can set your favorite audio language as the initial audio
language. (See page 53.)
OSD: All
1
2 3 4 5
From the remote control ONLY:
DVD 00:01:16 01:40:45 Press AUDIO. AUDIO
Title 1/15 Chapter 2/10 Angle 1/1 Audio language indicator appears on the TV screen for a
Audio 1/3 Eng 5.1ch 48KHz while.
Subtitle Off • Each time you press the button while the indicator
appears on the TV screen, the audio language changes as follows:
6 7 8
1 : Elapsed playing time and remaining time
1/3 Eng 5.1ch 2/3 Fre 5.1ch
2 : Disc type
3 : Current title and total number of the titles on the 3/3 Spa 5.1ch
disc
• Ex.: 1st title is playing out of 15 titles recorded. Ex.: When the disc has 3 selections—English,
4 : Audio language indication French, and Spanish
• Ex.: English is selected out of 3 audio languages recorded.
See right column.
5 : Current chapter and total number of the chapters Selecting the Multi-Angle Views
in the current title
• Ex.: 2nd chapter is playing out of 10 chapters recorded. While playing back a DVD containing multi-angle views, you can
6 : Subtitle language indication view the same scene at different angles.
• Ex.: When no subtitle is displayed on the TV screen.
See below. From the remote control ONLY:
ANGLE
7 : Signal format indicator Press ANGLE.
• Signal format type—Linear PCM (stereo), Dolby Digital, The angle indicator appears on the TV screen for a
and DTS Digital Surround—and bit rate will be indicated. while.
Ex.: When the disc is encoded with Dolby Digital 5.1 ch. • Each time you press the button while the angle indicator appears
on the TV screen, the view angle changes.
8 : Multi-angle view indicator
1/3 2/3
• Ex.: When only a single angle-view is recorded on the
disc. See right column.
From the remote control ONLY: Ex.: When the disc has 3 multi-angle views
SUB TITLE
Press SUB TITLE.
Subtitle language indicator appears on the TV screen
for a while.
• Each time you press the button while the indicator appears on the
TV screen, the subtitle language changes as follows:
27
EN24-33TH-A35[J].pm6 27 03.3.13, 2:25 PM
DVD Playback
AUDIO VOL
2 Press cursor 5/∞ to select the
item.
TOP
MENU MENU
ENTER
TOP MENU MENU Time : Select this to
move to a
3/2/5/∞ ENTER particular scene.
ENTER ON SCREEN Title: Select this to move to another title.
Chapter: Select this to move to another chapter.
3
CHOICE ON SCREEN
Disc menu-driven playback is possible while playing back a DVD How to input the title and chapter number
with menu (menu may be still pictures or moving pictures Press the number buttons corresponding to the number, then press
depending on the disc). ENTER to start playback.
• When operating a disc using the disc menu, refer also to the • To select number 5, press 5, then ENTER.
instructions supplied for the disc. • To select number 12, press 1, 2, then ENTER.
• To select number 22, press 2, 2, then ENTER.
DVD discs generally have their own menus or title lists. A menu • To cancel a mis-entry, press CLEAR.
usually contains various information about the disc and playback
selections. On the other hand, a title list usually contains titles of How to input the playing time
movies and songs recorded. Press the number buttons to input the playing time, then press
ENTER to start playback at the selected elapsed playing time.
From the remote control ONLY: • To input time “00:45:23,” press 4, 5, 2, 3, then ENTER.
TOP
1 Press MENU or TOP MENU. MENU MENU • To input time “01:23:45,” press 1, 2, 3, 4, 5, then ENTER.
A menu or title list will appear on the • To cancel a mis-entry, press CLEAR.
screen.
ENTER.
The unit starts playback of the selected
item.
• On some discs, you can also select items by pressing the
number buttons corresponding to the item numbers listed.
28
EN24-33TH-A35[J].pm6 28 03.2.3, 4:03 PM
Searching for a Particular Point 3 Press ENTER repeatedly to
select the repeat mode.
You can search for a particular portion while playing a disc— • Each time you press the button, ENTER
Variable Speed Forward/Reverse Search. Repeat mode changes as follows:
• No sound comes out during Variable Speed Forward/Reverse
Search.
x2 x4
7 A–B Repeat
While playing, you can also select a portion you want to repeat.
x20 x8 • A–B repeat is not performed between different titles.
Example:
To resume normal play
Press 3.
A–
Repeating Playback
29
EN24-33TH-A35[J].pm6 29 03.2.3, 4:03 PM
DVD Playback
TOP
MENU MENU 2 Press cursor 5/∞ to select
3/2/5/∞ “Mode.”
ENTER ENTER
ENTER
ON SCREEN Play Mode
Mode Off
CHOICE ON SCREEN Repeat Off
7
3 Repeat A–B Off
DOWN - TUNING - UP SLOW
OSD Off
OK
O S G OO
point. ENTER
“A–” appears on the display and “ A–”
appears on the TV.
30
EN24-33TH-A35[J].pm6 30 03.2.3, 4:03 PM
Programming the Playing Order of the 6 Press cursor 3 to select the
Chapters — Program Play chapter number.
ENTER
You can arrange the chapter playback order before you start playing. Program Title/Chapter
1 2 _ _ 4 _ _ _ _ 7 _ _ _ _ 10 _ _ _ _
You can program up to 12 steps. 2 _ _ _ _ 5 _ _ _ _ 8 _ _ _ _ 11 _ _ _ _
3 _ _ _ _ 6 _ _ _ _ 9 _ _ _ _ 12 _ _ _ _
From the remote control ONLY: Play Program Clear All
1 Press ON SCREEN.
The on-screen menu appears on the TV. ON SCREEN 7 Press the number button to CENTER SUBWOOFER
Play Mode 1 2 3 4
Mode Off
enter the chapter number. REAR-L REAR-R
Repeat Off 5 6 7 8
TEST CLEAR SETTING
Repeat A–B Off Program Title/Chapter
9 0
1 2 _ 3 4 _ _ _ _ 7 _ _ _ _ 10 _ _ _ _
OSD Off
2 _ _ _ _ 5 _ _ _ _ 8 _ _ _ _ 11 _ _ _ _
OK
3 _ _ _ _ 6 _ _ _ _ 9 _ _ _ _ 12 _ _ _ _
Play Program Clear All
2 Press cursor 5/∞ to select
• To select number 5, press 5.
“Mode.” • To select number 12, press 1, 2.
Play Mode ENTER
• To cancel a mis-entry, press CLEAR.
Mode Off
Repeat Off 8 Press cursor 3/2/5/∞ to select
Repeat A–B Off
Off
next program step number.
OSD
OK ENTER
Program Title/Chapter
1 2 3 4 _ _ _ _ 7 _ _ _ _ 10 _ _ _ _
2 _ _ _ _ 5 _ _ _ _ 8 _ _ _ _ 11 _ _ _ _
3 Press ENTER repeatedly to 3 _ _ _ _ 6 _ _ _ _ 9 _ _ _ _ 12 _ _ _ _
Play Program Clear All
select “Program.”
ENTER
31
EN24-33TH-A35[J].pm6 31 03.2.3, 4:03 PM
DVD Playback
SOUND
STANDBY/ON
AUDIO 7 Still Picture/Frame-by-Frame Playback
TV VCR
You can advance the still picture frame by frame while playing a
CENTER SUBWOOFER DVD.
1 2 3 4
REAR-L REAR-R
5 6 7 8 From the remote control ONLY:
CLEAR TEST
9
CLEAR SETTINGFM MODE
0 1 Press 8 once during playback.
DVD FM/AM AUX PROGRESSIVE
A still picture appears on the TV screen.
CONTROL TV/VIDEO SEARCH
8 PAUSE
TV VCR
TV VOL MUTING REC/MEMORY
AUDIO VOL
TOP
MENU MENU
3/2/5/∞
ENTER
ENTER
ON SCREEN 2 Press 8 repeatedly to advance the
CHOICE ON SCREEN
picture frame by frame.
3 8 • Each time you press the button, the picture
advances frame by frame.
DOWN - TUNING - UP SLOW SLOW +/–
AUDIO SUB TITLE ANGLE ZOOM 83 STEP 83 STEP 83 STEP 83 STEP 83 STEP 83 STEP
ZOOM
RETURN DIMMER DSP SURROUND
SLEEP
RM-STHA35J
DVD THEATER SYSTEM
To resume normal play
Press 3.
32
EN24-33TH-A35[J].pm6 32 03.2.3, 4:03 PM
7 Slow Motion Playback 7 Zoom
You can enjoy slow motion playback while playing a DVD. You can zoom on the picture while playing back a DVD.
From the remote control ONLY: From the remote control ONLY:
1 Press 8 at the point where you want to 1 Press ZOOM. ZOOM
start playback in slow-motion. The zoom indicator appears on the TV.
A still picture appears on the TV screen.
Forward: • Each time you press the button while the indicator appears, the
1/ 5 1/ 4 magnification changes as follows:
1/ 2 1/ 3 No Zoom
Zoom out (12 steps) Zoom in (12 steps)
Reverse:
1/ 5 1/ 4
1/ 1
2 Press cursor 3/2/5/∞ to move
1/ 2 1 /3 the portion you want to watch.
ENTER
33
EN24-33TH-A35[J].pm6 33 03.2.3, 4:03 PM
VCD/CD Playback
CENTER SUBWOOFER
Number
From the remote control ONLY:
1 2 3 4 buttons
5
REAR-L
6 7
REAR-R
8
1 Press ON SCREEN.
TEST CLEAR SETTINGFM MODE The on-screen menu appears on TV-screen.
9 0 ON SCREEN
Play Mode
DVD FM/AM AUX PROGRESSIVE
Mode Off
CONTROL TV/VIDEO SEARCH SEARCH Repeat Off
TV VCR Repeat A–B Off
TV VOL MUTING REC/MEMORY
OSD Off
OK
AUDIO VOL
TOP
MENU MENU
2 Press cursor 5/∞ repeatedly to
MENU
5/∞ select “OSD.”
ENTER ENTER
Play Mode ENTER
ON SCREEN Mode Off
CHOICE ON SCREEN
Repeat Off
3 Repeat A–B Off
OSD Off
4 /¢ DOWN - TUNING - UP SLOW
OK
AUDIO SUB TITLE ANGLE ZOOM
3 Press ENTER repeatedly to
RETURN RETURN DIMMER DSP SURROUND select the disc information.
SLEEP • Each time you press the button, OSD ENTER
changes as following:
RM-STHA35J
DVD THEATER SYSTEM
On All
Off
You can use some functions through the on-screen menu. Disc information
34
EN34-39TH-A35[B].pm6 34 03.2.3, 4:03 PM
Disc Menu–Driven Playback (Only for VCD) Moving to a Particular Portion Directly
The Play Back Control function (PBC) allows you to operate the
You can move to a particular portion (scene) on the track directly.
VCD using menus.
• PBC function is canceled when you use this function.
When you start playing a VCD with PBC function, a menu will
automatically appear on the TV screen.
From the remote control ONLY:
• A menu may be a list of items, divided screens, or some moving
pictures. (See “PBC operation concept” below.) 1 Press SEARCH during playback or pause. SEARCH
When a menu appears, you can select a desired item on the menu. • Each time you press the button, the following
• When a list of items is displayed on the TV screen, press the indication appears on the TV screen.
number buttons to select an item.
Track Search Disc Search
• When “3” or “SELECT” is displayed on the TV screen, press
3 to start playback.
canceled
From the remote control ONLY: 2 Press cursor 5/∞ to select the
To go to the next submenu item (only for Disc search.)
Press ¢. Track Search: ENTER
time. 5
TEST
6 7
CLEAR SETTING
8
35
EN34-39TH-A35[J].pm6 35 03.3.13, 3:02 PM
VCD/CD Playback
Repeating Playback
1
CENTER
2
SUBWOOFER
3 4
7 Repeat Play
REAR-L REAR-R From the remote control ONLY:
5 6 7 8
TEST CLEAR SETTINGFM MODE 1 Press ON SCREEN.
9 0
The on-screen menu appears on the TV.
DVD FM/AM AUX PROGRESSIVE ON SCREEN
Play Mode
CONTROL TV/VIDEO SEARCH
TV VCR
Mode Off
TV VOL MUTING REC/MEMORY Repeat Off
Repeat A–B Off
AUDIO VOL OSD Off
OK
TOP
MENU MENU
3/2/5/∞ 2 Press cursor 5/∞ to select “Repeat.”
ENTER
ENTER
Play Mode
ON SCREEN ENTER
Mode Off
CHOICE ON SCREEN Repeat Off
3 Repeat A–B Off
OSD Off
DOWN - TUNING - UP SLOW
1/¡ OK
AUDIO SUB TITLE ANGLE ZOOM
You can search for a particular portion while playing a disc— mode changes as follows:
Variable Speed Forward/Reverse Search.
• No sound comes out during Variable Speed Forward/Reverse Single All
Search on a VCD.
Off
To fast-forward the tracks—Variable Speed
Forward Search
Single: Current track be repeated. (REPEAT
From the remote control ONLY: 1 indicator lights up.)
Press ¡ during playback. All: Disc will be repeated. (REPEAT
• Each time you press the button, the search speed indicator lights up.)
changes as follows: Off: Repeat play is canceled. (Normal play
is resumed.)
x2 x4
x20 x8
36
EN34-39TH-A35[B].pm6 36 03.2.3, 4:03 PM
7 A–B Repeat Playing Back Tracks in Random Order
While playing, you can also select a portion you want to repeat. — Shuffle Play
37
EN34-39TH-A35[B].pm6 37 03.2.3, 4:03 PM
VCD/CD Playback
STANDBY/ON
3 Press ENTER repeatedly to
SOUND
TV VCR
AUDIO select “Program.” ENTER
CENTER SUBWOOFER Number • Each time you press the button, play
1 2 3 4 buttons mode changes as follows:
REAR-L REAR-R
5 6 7 8
TEST CLEAR SETTINGFM MODE Shuffle Program
9 0
DVD FM/AM AUX PROGRESSIVE
Off PBC*
CONTROL TV/VIDEO SEARCH
TV VCR
* Appears when only VCD with PBC is loaded
TV VOL MUTING REC/MEMORY
38
EN34-39TH-A35[B].pm6 38 03.2.3, 4:03 PM
To exit from program play 7 Slow Motion Playback
From the remote control ONLY: You can enjoy slow motion playback while playing a VCD.
1) Press ENTER repeatedly to select “Off” in step 3 on page 38.
2) Press cursor 5/∞ to select “OK”, then press ENTER. From the remote control ONLY:
Playback changes to normal play and the stored program is cleared. 1 Press 8 at the point where you want to
start playback in slow-motion.
To check the program contents A still picture appears on the TV screen.
1) Press ON SCREEN.
2) Press cursor 5/∞ to select “Mode.”
3) Press ENTER repeatedly to select “Program” again even 2 Press SLOW +. SLOW
though “Program” is selected in Step 2. • Each time you press the button, slow motion
4) Press cursor 5/∞ to select “OK”, then ENTER. speed changes as follows.
The program menu appears on the TV.
To disappear program contents, press ON SCREEN twice.
1/ 5 1/ 4
No Zoom
Zoom out (12 steps) Zoom in (12 steps)
39
EN34-39TH-A35[B].pm6 39 03.2.3, 4:03 PM
MP3 Playback
40
EN40-47TH-A35[J].pm6 40 03.2.13, 3:33 PM
The on-screen display
STANDBY/ON
SOUND AUDIO
TV VCR 1 2 3 4 5
Play Track 1/28 00:00:17
CENTER SUBWOOFER _ CARD Brow Disc
1 2 3 4 1 SOLITAIRE 6 CRIBBAGE.
REAR-L REAR-R 2 BEZIQUE.m 7 HEART.MP3
5 6 7 8 3 BRIDGE.mp3 8 OLDMAID.M
CLEAR SETTINGFM MODE
4 CANASTA.m 9 PINOCLE.M
TEST
5 COPAC.MP3 10 RUMMY.MP3
9 0
File:BEZIQUE.mp3
DVD FM/AM AUX PROGRESSIVE Artist: Album:
Song: Comments:
CONTROL TV/VIDEO SEARCH
Genre: Year:
TV VCR
TV VOL MUTING REC/MEMORY
6 7
AUDIO VOL
1 : Track number
TOP
MENU MENU
2 : Current folder name
3/2/5/∞
ENTER 3 : Current track (file) and total number of the tracks
ENTER
in the current folder
3
• Ex.: 1st track is playing out of 28 tracks recorded.
CHOICE ON SCREEN
7 8 4 : Play mode
4 /¢ DOWN - TUNING - UP SLOW
5 : Elapsed playing time
6 : Playback track (highlight)
AUDIO SUB TITLE ANGLE ZOOM
7 : File information
RETURN DIMMER DSP SURROUND
• If the MP3 file has ID3v1 tag, file information appears.
SLEEP
RM-STHA35J
DVD THEATER SYSTEM
To go to another track
Press ¢ or 4 during playback.
For in-depth information about a disc to be played back, see • ¢ : Skip to the beginning of the next track.
“Disc Introduction—DVD/VCD/CD” on page 24.
41
EN40-47TH-A35[J].pm6 41 03.2.3, 4:03 PM
MP3 Playback
TOP
MENU MENU
You can move to a particular track on the current folder directly.
3/2/5/∞
From the remote control ONLY:
ENTER ENTER
3
Press the number buttons to CENTER SUBWOOFER
1 2 3 4
select a track number you REAR-L REAR-R
CHOICE ON SCREEN
7 8 want. 5 6 7 8
TEST CLEAR SETTING
The system starts playback from the
4 /¢ DOWN - TUNING - UP SLOW
9 0
selected track.
AUDIO SUB TITLE ANGLE ZOOM
• To select number 5, press 5 then press ENTER.
RETURN DIMMER DSP SURROUND
• To select number 10, press 1, 0 then press ENTER.
SLEEP • To select number 23, press 2, 3 then press ENTER.
• To select number 123, press 1, 2, 3 then press ENTER.
RM-STHA35J
DVD THEATER SYSTEM
42
EN40-47TH-A35[J].pm6 42 03.2.3, 4:03 PM
3 Press ENTER. You can perform following operation same as in normal playback.
The selected track is marked (highlight).
Stop Track 1/28 00:00:00 ENTER To go to another track
_ CARD Crea Prog Press ¢ or 4 during playback.
1 SOLITAIRE 6 CRIBBAGE. • ¢ : Skip to the beginning of the next track.
2 BEZIQUE.m 7 HEART.MP3
3 BRIDGE.mp3 8 OLDMAID.M
4 CANASTA.m 9 PINOCLE.M
5 COPAC.MP3 10 RUMMY.MP3
• 4 : Skip to the beginning of the previous track.
• If you press ENTER again, the marked track is canceled.
43
EN40-47TH-A35[J].pm6 43 03.2.3, 4:03 PM
JPEG Playback
What is JPEG?
A still-picture data compression system proposed by the Joint
Photographic Expert Group, which features small decrease in image SOUND
STANDBY/ON
AUDIO
quality in spite of its high compression ratio. TV VCR
This system simplifies the hierarchical construction of a disc and CONTROL TV/VIDEO SEARCH
manages folders by “groups.” TV VCR
TV VOL MUTING REC/MEMORY
This system can recognize up to 999 items in one folder, items
including subfolders and files. AUDIO VOL
• If there is any type of files other than JPEG files in a folder, those
files are also counted in the total number of 999. TOP
MENU MENU
3/2/5/∞
NOTES for JPEG disc ENTER
ENTER
• JPEG discs (either CD-R or CD-RW) require a longer readout 3
time. (It differs due to the complexity of the directory/file
CHOICE ON SCREEN
configuration.) 7 8
• When making a JPEG disc, select ISO 9660 Level 1 or Level 2 as
the disc format. 4 /¢ DOWN - TUNING - UP SLOW
44
EN40-47TH-A35[J].pm6 44 03.2.3, 4:03 PM
Operations Using the On-Screen Display To stop the slide-show playback temporarily
Press 8 on the remote control.
The on-screen display
1 2 3 4
Stop Track 1/22 00:00:00 To resume the slide-show playback
_ Color Brow Disc
1 Rainbow 6 GREEN.JPG Press 3.
2 AZURE.JPG 7 ORANGE.JP
3 BLACK.JPG 8 PURPLE.JP
4 BLUE.JPG 9 WHITE.JPG
5 CYAN.JPG 10 YELLOW.JP
5
To stop the slide-show playback completely
1 : File number
Press 7.
2 : Current folder name
3 : Current file and total number of the files in the
current folder
• Ex.: 1st file is playing out of 22 files recorded.
4 : Play mode To skip files forward
Press ¢.
5 : Playback file (highlight)
• When press 3 to start playback slide-show, playback starts
this (highlight) file.
To skip files backward
Press 4.
From the remote control ONLY:
Button To do
To rotate a still picture
ENTER Start playback or go into a folder. Press cursor 3/2/5/∞.
When the slide-show stops and the picture is
3/ 2 / 5 / ∞ Select a file or folder. rotated on the TV.
ENTER
3: ANGLE 90
∞: ANGLE 180
2: ANGLE 270
To select the file. 5: ANGLE 0
Press cursor 3/2/5/∞.
ENTER To return to normal angle, press the button again or press 5.
Note:
Only 10 files can be shown on the TV.
To move to next 10 files, press cursor 3 repeatedly. To zoom in a still picture
To move to previous 10 files, press cursor 2 repeatedly. ZOOM
Press ZOOM.
The zoom indicator appears on the TV.
• Each time you press the button while the indicator
To show the selected file only appears, the magnification changes as follows:
Press ENTER.
The selected file (still picture) is shown on ENTER No Zoom
the TV. Zoom ✕ 4 Zoom ✕ 1.25
12 steps
Notes
The picture size changes automatically to fit the TV-screen. • While the picture is zoomed in, press cursor 3/2/5/∞ to move
the portion you want to watch.
• The showing time varies depending on the file size or other factor.
45
EN40-47TH-A35[J].pm6 45 03.2.3, 4:03 PM
JPEG Playback
3
CHOICE ON SCREEN 2 Press cursor 3/2/5/∞ to select
7 8
the file.
4 /¢ ENTER
DOWN - TUNING - UP SLOW Stop Track 1/22 00:00:00
_ Color Crea Prog
AUDIO SUB TITLE ANGLE ZOOM ZOOM 1 Rainbow 6 GREEN.JPG
2 AZURE.JPG 7 ORANGE.JP
RETURN DIMMER DSP SURROUND 3 BLACK.JPG 8 PURPLE.JP
4 BLUE.JPG 9 WHITE.JPG
SLEEP 5 CYAN.JPG 10 YELLOW.JP
3
RM-STHA35J
DVD THEATER SYSTEM Press ENTER.
The selected file is marked (highlight).
Stop Track 1/22 00:00:00 ENTER
_ Color Crea Prog
1 Rainbow 6 GREEN.JPG
2 AZURE.JPG 7 ORANGE.JP
3 BLACK.JPG 8 PURPLE.JP
4 BLUE.JPG 9 WHITE.JPG
Moving to a Particular File Directly 5 CYAN.JPG 10 YELLOW.JP
46
EN40-47TH-A35[J].pm6 46 03.2.3, 4:04 PM
5 Press cursor 3/2/5/∞ to select To stop during playback
“Crea Prog,” then press Press 7.
ENTER
ENTER.
“Crea Prog (Create Program)” changes
to “Brow Prog (Browse Program),” and To start playback again
selected files appear on the TV. Press 3.
Stop Track 1/22 00:00:00
Selected Files: Brow Prog
1 BLACK.JPG 6 AZURE.JPG
2 PURPLE.JP To rotate a still picture
3 GREEN.JPG
4 WHITE.JPG Press cursor 3/2/5/∞.
5 CYAN.JPG
ENTER
7 Press 3 or ENTER.
The selected files are
played in the order you ENTER
have programmed. To start playback of the selected file
Press cursor 3/2/5/∞ to select the file,
then press ENTER.
ENTER
To exit from program play
From the remote control ONLY:
Press cursor 3/2/5/∞ to select “Brow Prog,” then press
ENTER.
“Brow Prog (Browse Program)” changes to “Brow Disc (Browse
To move to a particular track directly
disc).” Press the number buttons to select a file CENTER SUBWOOFER
press ENTER.
• To select number 23, press 2, 3 then press ENTER.
• To select number 123, press 1, 2, 3 then press ENTER.
You can perform following operation same as in normal playback.
To go to another file
Press ¢ or 4 during playback.
• ¢ : Skip to the beginning of the next file.
47
EN40-47TH-A35[J].pm6 47 03.2.3, 4:04 PM
Tuner Operations
Tuning in Stations
TV
CONTROL
VCR
TV/VIDEO SEARCH
2 Press and hold TUNING UP or DOWN - TUNING - UP
TV VOL MUTING REC/MEMORY PROGRAM DOWN until you find the frequency
AUDIO VOL
you want.
• TUNING UP : Increases the frequency.
TOP
MENU MENU • TUNING DOWN : Decreases the frequency.
ENTER The system starts searching for stations and stops when a station
ENTER
of sufficient signal strength is tuned in.
CHOICE ON SCREEN • You can use the number button to enter the station frequency
TUNING directly
UP/DOWN DOWN - TUNING - UP SLOW 1 /¡
SLEEP
desired band appears on the display.
The last received station of the selected band is
RM-STHA35J tuned in.
DVD THEATER SYSTEM
• Each time you press the button, the source changes as follows:
DIGITAL IN ANALOG IN
For basic tuner operations, see “Basic Tuner Operations” on page
16.
2 Press and hold ¢ or 4 until
you find the frequency you want.
• ¢ : Increases the frequency.
• 4 : Decreases the frequency.
The system starts searching for stations and stops when a station
of sufficient signal strength is tuned in.
Notes:
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator
also lights up.
• When you press the button repeatedly, the frequency changes step
by step.
48
EN48-49TH-A35[J].pm6 48 03.2.3, 4:04 PM
Using Preset Tuning To tune in a preset station
From the remote control ONLY:
Once a station is assigned to a channel number, the station can be 1 Press FM/AM repeatedly to select the FM/AM
quickly tuned. You can preset up to 30 FM and 15 AM stations.
band.
The last received station of the selected band is
To store the preset stations automatically tuned in.
From the remote control ONLY: • Each time you press the button, the band alternates between
REC/MEMORY
Press and hold MEMORY for a while. FM and AM.
“AUTO SAVE” appears on the display, and automatic
2
CENTER SUBWOOFER
preset starts. Press the number button to 1 2 3 4
Local stations with the strong signals are searched for and stored select a preset station. REAR-L REAR-R
STEREO
From the remote control ONLY:
Press FM MODE. FM MODE
49
EN48-49TH-A35[J].pm6 49 03.2.3, 4:04 PM
Setting up the DVD Preferences
TOP
MENU MENU
3/2/5/∞
ENTER
ENTER
CHOICE
CHOICE ON SCREEN
DOWN - TUNING - UP SLOW Language: You can select the initial languages for the disc
menu, audio, and subtitle.
AUDIO SUB TITLE ANGLE ZOOM
You can also select the language used on the TV
RETURN DIMMER DSP SURROUND screen while operating this system.
SLEEP Picture: You can select the desired options concerning a
picture or monitor screen.
RM-STHA35J
DVD THEATER SYSTEM Audio: The Audio menu is not used for this system.
Setting: You can make the speaker settings according to the
layout of your speakers.
Rating: You can change the setting the parental lock.
See “Setting the Parental (Rating) Level” on page
54.
50
EN50-55TH-A35[J].pm6 50 03.2.3, 4:04 PM
3 Press ENTER Language Menu
The selected menu appears on the TV.
Note:
The original language will be selected as the initial language
regardless of your setting in the following cases:
• If the language you have selected is not recorded on the disc.
• If the disc is programmed to be played back in the original
language.
51
EN50-55TH-A35[J].pm6 51 03.2.13, 5:42 PM
Setting up the DVD Preferences
52
EN50-55TH-A35[J].pm6 52 03.2.3, 4:04 PM
Audio Menu 7 Setting the delay time
Adjust the delay time of the sounds from the center speaker and the
The Audio menu is not used for this system. rear speakers, comparing to that of the sounds from the front
speakers. If the distance to the center speaker and/or the rear
Language Picture Audio Setting Rating
speakers from your listening point is almost the same as from the
front speakers, select “0 ms (msec).”
D Digital Off
DTS Off
MP3 Off
CD Off Center speaker
Next Page Left front Subwoofer Right front
speaker speaker
You can make the speaker settings according to the layout of your
speakers.
Left rear Right rear
speaker speaker
7 Speaker setting
Dynamic Range:You can enjoy a powerful sound at night even at
a low volume level when listening to the sound Language Picture Audio Setting Rating
with Dolby Digital.
• On: Select this when you want to apply the
compression effect fully (useful at midnight.) Subwoofer On
• Off: Select this when you want to enjoy surround Surround Small
with its full dynamic range (no effect Center Small
Front Speaker Small
applied.)
Return
C.Delay: To register delay time for center speaker—from
0 msec to 5 msec. See “Setting the delay time”
Subwoofer: You cannot select this item.
on right column.
Surround / Center / Front Speaker:
R.Delay: To register delay time for rear speakers—from 0 Select the speaker setting according to the layout
msec to 15 msec. See “Setting the delay time” of your speakers. (You cannot select “Off” for
on right column. the front speakers.)
Speaker Set: Enters Speaker setting sub-menu. See “Speaker • Small: Select this when the cone speaker unit built in
setting” on right column. the speaker is smaller than 12 cm (43/4 inches).
(Select this when using the supplied speakers.)
Test Tone: The test tone menu appears on the TV and the • Off: Select this when the center speaker and/or
test tone comes out from the speakers in the rear speakers are not connected or not in use.
order. See “Adjusting the Sound” on page 23. If you want to enjoy monaural source with
• If a disc is not loaded, the test tone does not the front speakers, select “Off” for the center
come out. speaker.
• If there is a speaker from which no sounds
comes out, check the speaker’s connection (see Return: Return to the Setting menu.
pages 6 and 7.)
53
EN50-55TH-A35[J].pm6 53 03.2.3, 4:04 PM
Setting up the DVD Preferences
SOUND
STANDBY/ON
AUDIO
1 Press CHOICE.
TV VCR The choice menu appears on the TV.
CENTER SUBWOOFER Number
CHOICE
1 2 3 4 buttons
REAR-L REAR-R 2 Press cursor 3 repeatedly to
5 6 7 8
TEST CLEAR SETTINGFM MODE
select “Rating.”
9 0
ENTER
DVD FM/AM AUX PROGRESSIVE
AUDIO VOL
3 Press ENTER.
The Rating menu appears on the TV.
TOP
MENU MENU ENTER
3/2/5/∞ Language Picture Audio Setting Rating
ENTER
ENTER
CHOICE
Password ––––
CHOICE ON SCREEN Rating 1. Kid Safe
SLEEP
4 Press the number buttons to CENTER SUBWOOFER
1 2 3 4
RM-STHA35J
enter the password (4 digits), REAR-L REAR-R
DVD THEATER SYSTEM
then ENTER. 5 6 7 8
TEST CLEAR SETTING
“ ” changes to “ ” on the menu. 9 0
Password ––––
Rating 1. Kid Safe
54
EN50-55TH-A35[J].pm6 54 03.2.3, 4:04 PM
5 Press cursor ∞ to select 7 To change the password
“Rating.”
Language Picture Audio Setting Rating ENTER 1 Repeat steps 1 to 4 of “Setting the Parental
(Rating) Level” procedure.
55
EN50-55TH-A35[J].pm6 55 03.2.3, 4:04 PM
Operating JVC’s Components
You can use the remote control to operate not only this unit but also other JVC products.
• Refer also to the manuals supplied for the other products.
– This remote control can operate a VCR whose remote control code is set to A code.
• To operate the other products, aim the remote control directly at the remote sensor on the target product.
❏ To operate a JVC’s TV
CONTROL
After pressing CONTROL TV on the TV VCR
STANDBY/ON remote control, you can perform the
SOUND AUDIO
TV VCR following operations on the TV.
TV
CENTER SUBWOOFER Number
1 2 3 4 TV : Turn on or off the TV.
buttons
REAR-L REAR-R
5 6 7 8
TV VOL +/–: Adjust the volume.
TEST CLEAR SETTING FM MODE
9 0
TV/VIDEO: Set the input mode (either TV or
VIDEO).
CONTROL TV DVD FM/AM AUX PROGRESSIVE
1 – 9, 0: Select the channel.
CONTROL TV/VIDEO SEARCH TV/VIDEO
TV VCR
1/ ¡: Change the channels.
TV VOL +/– TV VOL MUTING REC/MEMORY
AUDIO VOL
TOP
MENU MENU
ENTER
CHOICE ON SCREEN
56
EN56-60TH-A35[J].pm6 56 03.2.3, 4:04 PM
Operating Other Manufacturers’ TV
CHOICE ON SCREEN
7 Manufacturers’ codes for TV
DOWN - TUNING - UP SLOW 1/ ¡ Manufacturer Codes
57
EN56-60TH-A35[J].pm6 57 03.2.3, 4:04 PM
Maintenance
To get the best performance of the unit, keep your discs and
mechanism clean.
58
EN56-60TH-A35[J].pm6 58 03.2.3, 4:04 PM
Troubleshooting
Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center.
59
EN56-60TH-A35[J].pm6 59 03.2.3, 4:04 PM
Specifications
60
EN56-60TH-A35[J].pm6 60 03.2.13, 3:50 PM
LIMITED WARRANTY CONSUMER VIDEO 1-90
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date
of original retail purchase for the period as shown below. ("The Warranty Period")
PARTS LABOR
1 YR 90 DAYS
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN
COMMONWEALTH OF PUERTO RICO.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF RE-
FURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION PACK-
AGED WITH EACH REFURBISHED PRODUCT.
QUALITY SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
http://www.jvc.com
Dear Customer,
In order to receive the most satisfaction from your purchase,please read the instruction booklet before
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest
authorized servicer or visit our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Caution
To prevent electrical shock,do not open the cabinet.There are no user serviceable
parts inside.Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or
on the web at www.JVC.com
BT-51005-5
(0301)
EN
© 2003 VICTOR COMPANY OF JAPAN, LIMITED V
J C 0203TMMMDWBET