Documente Academic
Documente Profesional
Documente Cultură
SF SL SM SH SB
All the essentials you have come to expect are included in JIS B 5012 springs.
Special Springs press die & plastic mould coil springs are interchangeable with other
manufacturer's JIS B 5012 spring.
- Dimensional consistency.
- High quality alloy steel, with characteristics to be found in automative engine valve
springs.
Laboratory & dynamically performance tested.
- All springs are compressed to solid to eliminate initial free length reduction.
- Special custom-made springs available, please contact free our technical office.
50 SM 30 - 125
ORDERING EXAMPLE:
quantity spring code
2
SELECTION OF SPECIAL SPRINGS ( JIS B 5012 ) SPRING
WORKING CYCLES
SERIES LOAD COLOUR 1,000,000 500,000 300,000 MAX. deflection
(% of free lenght) (% of free length) (% of free lenght) (% of free lenght)
- It is always better to use a higher number of springs at a lower force and lower
percentage of travel for longer life, consistent stock control and stripping.
- Where the ratio of the free length to diameter is greater than 3,5 then the
springs should be guided.
TOLERANCES
1,200
Super Load
+ 0.0 mm 1,000
OUTSIDE
DIA. - 0.7 mm 900
Heavy Load
800
INSIDE + 0.7 mm
700
DIA. + 0.1 mm
600
Medium Load
FREE ±1% 500
LENGTH ± 0.5 mm at least 400 Light Load
300
Lightest Load
LOAD ± 10 % 200
100
COILING Right 0
0 2 4 6 8 2 5 7 5
10 20 30 40 50 60 mm
Outside Diameter
3
SF LIGHTEST LOAD SPRINGS JIS B 5012
Outside Inside Free Spring 0.3 million 0.5 million 1 million
Spring
Dia. Dia. Length Constant
Code Deflection Load Deflection Load Deflection Load
4
SF LIGHTEST LOAD SPRINGS JIS B 5012
Outside Inside Free Spring 0.3 million 0.5 million 1 million
Spring
Dia. Dia. Length Constant
Code Deflection Load Deflection Load Deflection Load
5
SF LIGHTEST LOAD SPRINGS JIS B 5012
Outside Inside Free Spring 0.3 million 0.5 million 1 million
Spring
Dia. Dia. Length Constant
Code Deflection Load Deflection Load Deflection Load
6
SF LIGHTEST LOAD SPRINGS JIS B 5012
Outside Inside Free Spring 0.3 million 0.5 million 1 million
Spring
Dia. Dia. Length Constant
Code Deflection Load Deflection Load Deflection Load
7
SL LIGHT LOAD SPRINGS JIS B 5012
Outside Inside Free Spring 0.3 million 0.5 million 1 million
Spring
Dia. Dia. Length Constant
Code Deflection Load Deflection Load Deflection Load
8
SL LIGHT LOAD SPRINGS JIS B 5012
Outside Inside Free Spring 0.3 million 0.5 million 1 million
Spring
Dia. Dia. Length Constant
Code Deflection Load Deflection Load Deflection Load
9
SL LIGHT LOAD SPRINGS JIS B 5012
Outside Inside Free Spring 0.3 million 0.5 million 1 million
Spring
Dia. Dia. Length Constant
Code Deflection Load Deflection Load Deflection Load
Complete range of low cost high performances round wire coil springs, perfect for any
TOLERANCES 90
L
80
+ 0.0 mm
OUTSIDE
DIA. 70
- 0.7 mm
60
+ 0.7 mm
INSIDE
DIA. 50
+ 0.1 mm
±1% 40
FREE
LENGTH
± 0.5 mm at least 30
20
LOAD ± 10 %
10
COILING Right 0
0 2 4 6 8 2 4 6 8 2 5 7 5
10 20 30 40 mm
Outside Diameter
32 % 24 % 16 %
Outside Inside Free Spring
Spring
Dia. Dia. Length Constant Deflection Load Deflection Load Deflection Load
Code
mm mm mm Kgf / mm mm Kgf (N) mm Kgf (N) mm Kgf (N)
COILING Right 20
DEFLECTION 10
40 ÷ 50 %
(% of free length)
0
MAX. DEFL. 0 2 4 6 8 2 4 6 8 2 5 7 5
(% of free length)
60 % 10 20 30 40 50 mm
Outside Diameter
1 million
Outside Inside Free Spring Solid
Spring 50 %
Dia. Dia. Length Costant Length
Code Deflection Load
PRESSORI A MOLLA
SPRING PLUNGERS
DRÜCKER MIT FEDER
POUSSOIRS A' RESSORT
Questo catalogo annulla e sostituisce tutti i precedenti. Special Springs si riserva il diritto di modificare e di migliorare i suoi prodotti senza alcun preavviso.
This catalogue cancels and replaces any previous one. Special Springs reserves the right to modify and improve its products without notice.
Dieser Katalog ersetzt alle vorausgegangenen Ausgaben. Die Fa. Special Springs behält sich das Recht vor, Änderungen und Verbesserungen der Produkte ohne
Benachrichtigung vorzunehmen.
Ce catalogue remplace et substitue tous les précedents. Special Springs se réserve le droit de modifier et d'améliorer ses produit sans aucun avis.
CAT. 3M - 12/00
Authorised Stockiest :
GLOBAL TOOLING SOLUTIONS
No:15/73, 99th Street, 15th Sector,
K.K.Nagar, Chennai - 600 078, Tamil Nadu, India.
Tel :+9144 42103730, Tel Fax :+9144 42103730, M :+91 9789988430
Email :infogtsindia@gmail.com.
Special Springs S.r.l. via Brega, 216 36027 Rosà (VI) ITALY
tel. ++39 0424 539181
fax ++39 0424 898230
info@specialsprings.com www.specialsprings.com Cat. 3M Ed.2000 Rev.0