Documente Academic
Documente Profesional
Documente Cultură
to
ASME B16.34-2009
Valves — Flanged, Threaded, and Welding End
The supplement corrections listed below apply to ASME B16.34-2009. This supplement was
approved by the American National Standards Institute (ANSI) on October 20, 2010.
December 2010
J1809A
Page Location Change
50 Table 2-2.2 In the second column, fifth entry “A 351
Gr. CF3M (3)” added.
51 Table 2-2.2 In the second column, fifth entry “A 351
Gr. CF3M (4)” added.
52 Table 2-2.3 In the third column, second and third
entries [“A 351 Gr. CF3 (1)” and “A 351
Gr. CF3M (1),” respectively] deleted.
55 Table 2-2.5 In the third column, first entry “A 351
Gr. CF8C (3)” deleted.
56 Table 2-2.5 In the third column, first entry “A 351
Gr. CF8C (3)” deleted.
132 Table VII-2-2.1 (1) In the second column, third entry “A 351
Gr. CF3 (2)” added.
(2) Referenced Note (2) added: “(2) Not to
be used over 800°F.”
133 Table VII-2-2.1 (1) In the second column, third entry “A 351
Gr. CF3 (2)” added.
(2) Referenced Note (2) added: “(2) Not to
be used over 800°F.”
134 Table VII-2-2.2 In the second column, seventh entry “A 351
Gr. CF3M (3)” added.
135 Table VII-2-2.2 In the second column, seventh entry “A 351
Gr. CF3M (3)” added.
136 Table VII-2-2.3 In the third column, second and third
entries [“A 351 Gr. CF3 (1)” and “A 351
Gr. CF3M (1),” respectively] deleted.
139 Table VII-2-2.5 (1) In the third column, first entry A 351
Gr. CF8C (3) deleted.
(2) Note (3) deleted.
140 Table VII-2-2.5 (1) In the third column, first entry A 351
Gr. CF8C (3) deleted.
(2) Note (3) deleted.