Documente Academic
Documente Profesional
Documente Cultură
Chapter 11
Modal Analysis
11.1 Step-by-Step: Gearbox
11.2 Step-by-Step: Two-Story Building
11.3 More Exercise: Compact Disk
11.4 More Exercise: Guitar String
11.5 Review
Chapter 11 Modal Analysis Section 11.1 Gearbox 2
Section 11.1
Gearbox
Chapter 11 Modal Analysis Section 11.1 Gearbox 3
Techniques/Concepts
Unprestressed
Modal Analysis
Prestressed Modal
Analysis
Create Mode Shape
Results
Chapter 11 Modal Analysis Section 11.2 Two-Story Building 4
Section 11.2
Two-Story Building
Chapter 11 Modal Analysis Section 11.2 Two-Story Building 5
Original Structure...
Chapter 11 Modal Analysis Section 11.2 Two-Story Building 6
After Bracing...
Chapter 11 Modal Analysis Section 11.3 Compact Disk 7
Section 11.3
Compact Disk
Problem Description
The maximum
tensile stress is
20.8 MPa, far less
than the material's
tensile strength
(65 MPa).
Chapter 11 Modal Analysis Section 11.3 Compact Disk 9
Natural Frequencies
[2] The
second
lowest
natural [3] This is the "line of
frequency. resonance," which has
a slope of unity (note
that 30,000 rpm =
500 Hz). If any
[1] The frequencies fall on this
lowest line, they will be
natural excited and resonance
frequency. will occur.
Chapter 11 Modal Analysis Section 11.4 Guitar String 10
Section 11.4
Guitar String
Terminologies
Harmonic Series
Just Tuning System
Twelve-Tone Equally Tempered Tuning
System
Beat Frequency
Chapter 11 Modal Analysis Section 11.4 Guitar String 11
Harmonic Series
Harmonic Series
.
Chapter 11 Modal Analysis Section 11.4 Guitar String 14
Beat Frequency