Sunteți pe pagina 1din 24

Spinning Preparation

OMEGAlap E 36

ADVANTAGES

OMEGAlap E 36
Combing Preparation Machine

OUTSTANDING
FEATURES

TECHNICAL DATA

Unique winding technology


for highest performance
THE COMFORT OF
COMPETENCE
ADVANTAGES
Unique belt winding technology ..... 03 The unique belt winding
Effective production of
over 600 kg/h .................................. 04 technology developed by
Superior lap quality......................... 07 Rieter guarantees optimal
preparation for high-perfor-
mance combing.

OUTSTANDING FEATURES
Outstanding features ....................... 08
Unique belt winding technology ..... 10
Operating principle of
belt winding technology .................. 11
Lower energy consumption ............. 12
Superior lap quality......................... 13
Highest Productivity ........................ 14
Sophisticated machine concept ...... 16
Operational design .......................... 17
Lap transport system ....................... 18
OMEGAlap E 36e ............................. 19

TECHNICAL DATA
Machine data ................................... 20
OMEGAlap
THE COMFORT OF COMPETENCE
The Comfort of Competence........... 22
Unique Belt
Winding
Technology
3
Effective Production
of over 600 kg/h

4
OMEGAlap
By means of an elaborate machine
concept with which production val-
ues of over 600 kg/h are achieved,
Rieter combing preparation ma-
chines provide the optimal condi-
tions for efficient combing sets.
5
The combination of high
lap wrapping and optimal
pressure distribution guar-
antees a homogeneous lap
build-up which is distin-
guished by high lap even-
ness and low hairiness.
6
Superior Lap
Quality

OMEGAlap 7
Drafting System
Highest Productivity Established two-zone drafting system
Effective Production of over 600 kg/h

Flexible Lap
Transport Solution
Fully automated and
semi-automatic lap transport

Homogeneous Lap
High lap evenness and low hairiness

Unique Belt
Winding Principle
High lap wrapping and optimal
pressure distribution
8
OUTSTANDING
FEATURES

Excellent Batt
Guiding
Web table with gentle
sliver guide elements

Sliver Monitor
Large Cans Sensor-monitored feed creel
for rapid fault elimination
Can diameter of
up to 1 200 mm

9
Rieter . OMEGAlap E 36

Unique Belt Winding Technology


Lap wrapping and optimal pressure distribution for the best possible
lap production

The OMEGAlap has a unique belt winding technology At the start of the process, the contact circumference
which ensures highest economy in the production of amounts to 180° whereas at the end of the process it
high-quality laps. The optimal winding of the batt onto reaches 270°. The lap build-up process is significantly
the tubes is the technologically crucial process. With supported by an optimal pressure distribution range.
OMEGAlap, the belt wraps around the infeed batt and
thus the lap. The wrapping angle is regulated during lap This is also reflected in the production speed which is up
build-up. to 50% higher in comparison with conventional sytems.

Four calender

Batt infeed

Lap
Wickel

++

Lap belt

MAXIMUM WRAPPING AND OPTIMAL PRESSURE DISTRIBUTION, taking the OMEGAlap E 36 as an example

Pressure distribution across 270° lap circumference

10
Rieter . OMEGAlap E 36

Operating Principle of Belt Winding Technology


The unique belt winding technology in four steps

Lap production by means of belt drive and tensioning system is fully automated.

1. Inserting the empty tubes, pneumatic closing of the two 2. Closing the belt unit, tensioning of the belt, pneumatic
winding discs for axial fixation of the tubes. fixation of the fibre sliver on the tubes, start of the wind-
ing up process.

3. Winding up of the batt at constant speed until the full 4. Machine stop, opening of the belt unit, front ejection of
lap diameter is reached. the full lap.

11
Rieter . OMEGAlap E 36

Lower Energy Consumption


Up to 25% lower energy consumption compared
to conventional winding systems

In the present day, energy efficiency


and energy saving play an increasingly
central role.

Rieter has taken this into account for


many years and has developed new in-
novative products to reduce electricity
costs. The same goes for the develop-
ment of the OMEGAlap combing prepara-
tion machine.

Lowest energy consumption per kilogram of lap production


Flexing ability during the winding process exerts a Lower energy consumption

significant influence on the level of energy consump-


100
tion. The belt winding technology developed by Rieter
-25%
reduces just this flexing ability and in addition to the
Energy costs / kg production [%]

80
energy-optimised selection of electronic and mechanical
drive elements, further contributes towards lowering the 60
energy consumption. Compared to conventional winding
40
systems, the OMEGAlap achieves up to 25% lower energy
consumption per kilogram of lap production. 20

Conventional winding system

OMEGAlap

12
Rieter . OMEGAlap E 36

Superior Lap Quality


Constant lap quality for optimal yarn quality

Best lap quality High yarn quality


The OMEGAlap E 36 obtains best lap quality at highest As a systems supplier, Rieter places value on
production speeds. That means: securing quality across all process stages. That
••Homogeneous lap build-up means, that the influence of the winding system is
••Good fibre orientation and batt structure tested through to the yarn.
••Uniform batt weight over the whole lap area, i.e. lower
CVm% values The qualitative characteristics of the OMEGAlap
••Optimal processing behaviour on the combing machines are convincing at all stages through to the yarn.
Yarn manufacturers worldwide therefore favour
OMEGlap as their preferred combing preparation.

High batt uniformity Faultless yarn quality

80 100

79
80
78
Batt weight [g/m]

77
60
IPI [%]

76

75
40

74
20
73

72 0
20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 Thin places Thick places Neps Total IPI CVm%
Lap length [m] -50% +50% +200%

Conventional: CV1m = 0.48% Conventional


OMEGAlap E 36: CV1m = 0.37% OMEGAlap

13
Rieter . OMEGAlap E 36

Highest Productivity
The most economical combing preparation machine with
over 600 kg/h production

Regardless of raw material and lap diameter, the OMEGAlap E 36 has a constant production speed of 230 m/min. This
allows the supply of larger and extremely economic combing sets. The most economic combing set comprises six Rieter
combers E 86 and one OMEGAlap E 36. The resulting set production of over 540 kg/h sliver is the most productive combing
set available on the market.

14
Rieter . OMEGAlap E 36

Ideal combing preparation for the combing process


A high-quality and efficient combing process demands an optimally coordinated combing preparation. Draw frames from
Rieter meet the highest requirements and are consequently the ideal combination within a Rieter high-performance comb-
ing line.

Economic combing set with one OMEGAlap E 36, six Rieter ROBOlap combers E 86, one SERVOlap E 26 transport system

15
Rieter . OMEGAlap E 36

Sophisticated Machine Concept


Perfection from sliver to lap

The OMEGAlap E 36 consists of infeed, winding head The material runs over guide elements that treat the sliver
and delivery sections. gently and is supplied to the two drafting units where two
••The infeed section comprises the centrally arranged webs are formed.
creel, the web table with two linear positioned drafting
units and the web doubling towards the winding head. The webs are laid over one another on the web table and
••The winding head accommodates the drive, four cal- fed to the lap head. The material runs between the four
ender rolls as well as the belt winding and tensioning calendar rolls, which compress the web to an even batt.
system.
Using belt technology, the batt is wrapped around a tube.
••The delivery section can be supplied for semi-automatic
The full lap is finally extruded from the lap head and
or fully automated lap transport, according to the cus-
placed on a lap truck or lap transport conveyor belt.
tomer’s requirements.

Draw frame slivers are fed to the OMEGAlap from cans.

16
Rieter . OMEGAlap E 36

Operational Design
Spinning-plant-tested components for operator-friendly handling

Sliver-protecting feed creel


The feed creel is distinguished by its gentle guidance
of the sliver. With the help of sensors, all sliver feed is
monitored to detect missing or stationary slivers. Error
messages allow operating personnel to eliminate sliver
breaks precisely and quickly.

Web table with drafting system


The two-zone drafting system can be adapted to the
raw material in the break and main draft zone and
is equipped with efficient drafting system suction.
Adjustable guide elements on the lap table ensure
that the web is fed into the winding head at the
optimal width.

Effective suction concept


An effective suction concept supplements the belt drive
and tensioning system in the winding head and performs
the following functions:
••suction of the batt onto the empty tube following lap
change
••maintaining cleanliness of the calender rolls
••cleaning the lap belt

17
Rieter . OMEGAlap E 36

Lap Transport System


Flexible solutions for gentle and efficient lap transport

Gentle and efficient lap transport Fully automated transport system


The OMEGlap E 36 can be supplied with a semi-
SERVOlap E 26
automatic or a fully automated lap transport system,
according to requirements.

Semi-automatic transport system


SERVOtrolley
Four laps can be transported with a SERVOtrolley.
Transfer to the comber is carried out manually. The
SERVOtrolley and comber are automatically loaded
and unloaded.

System advantages:
••high degree of flexibility
••easy handling
Eight laps are transported simultaneously using the fully
••low capital costs
automated SERVOlap E 26 transport system.

System advantages:
••reduced space requirements
••savings on operating personnel
••increased flexibility
••high quality consistency
••enhanced efficiency

The most economical combing set consists of an


OMEGAlap E 36 and six combers E 86 in combination with
the SERVOlap E 26 fully automated lap transport system.

18
Rieter . OMEGAlap E 36

OMEGAlap E 36e
For smaller economic combing sets

The combination of the OMEGAlap E 36e and the combers E 86 form The E 36e is therefore the ideal combing prepa-
the economic alternative for smaller combing sets. At the highest ration machine to make combing sets with a
comber production, the combing set consists of four Rieter combers production of up to 336 kg/h a reality.
E 86 and an OMEGAlap E 36e.

19
Rieter . OMEGAlap E 36

Machine Data
OMEGAlap E 36 / E 36e combing preparation machine

∅160
2 802

2 176

1 434
800

∅300

1 701 3 132

4 833

7 912
848
1 798
3 495

982

6 890

1 000

7 963

20
Rieter . OMEGAlap E 36

Technological data E 36 E 36e

Application range 1 1/16 – 1 1/2 (1 3/4) 1 1/16 – 1 1/2 (1 3/4)

Sliver count range 3 – 6 ktex 3 – 6 ktex

Doubling max. 28-fold max. 28-fold

Infeed max. 140 ktex max. 140 ktex

Draft 1.4 – 2.4-fold 1.4 – 2.4-fold

Batt weight, delivery max. 80 g/m max. 80 g/m

Technical data

Delivery speed (constant) 230 m/min 140 m/min

Production over 600 kg/h eff.: max. 400 kg/h

Winding width 300 mm 300 mm

Lap diameter max. 580 mm 580 mm

Lap weight max. 25 kg 25 kg

Energy consumption • Machine approx. 4.8 kWh (installed 14 kW) approx. 3.8 kWh (installed 6.5 kW)
• Fiber separator approx. 2.7 kWh (installed 3.0 kW) approx. 2.7 kWh (installed 3.0 kW)

Compressed-air supply requirements, 7 bar approx. 16.5 Nm/h3 approx. 16.5 Nm/h3

Machine data

∅ 600 x 1 200 mm (∅ 24 in x 48 in)


∅ 1 000 x 1 200 mm (∅ 40 in x 48 in)
Can creel
∅ 1 000 x 1 500 mm (∅ 40 in x 59 in)
∅ 1 200 x 1 200 mm (∅ 48 in x 48 in)

Drafting System 3 over 3 cylinders

Dedusting Connection to external systems or fiber separator

Machine dimensions with cans ∅ 600 mm with cans ∅ 1 000 mm with cans ∅ 1 200 mm

Machine length incl. cans (without transport system) 6 406 mm 7 963 mm 8 658 mm

Machine width incl. cans 5 040 mm 6 890 mm 7 609 mm

Machine height max. (with central upward suction) 2 950 mm 2 950 mm 2 950 mm

21
The Comfort of Competence
Put your confidence in Rieter‘s competence and
enjoy the comfort of partnership!

Rieter is the leading supplier of installations for manufacturing yarns from short staple fibres. As a competent part-
ner, Rieter makes customers‘ lives easier. It provides advice and support from the initial investment discussions to the
successful operation of their spinning mills. Rieter‘s comprehensive know-how from fibre through yarn to the finished
textile is the basis for innovative machines and consistent yarn quality.

Settle back and relax thanks to Rieter.


22
Rieter . OMEGAlap E 36

Valuable Systems
Rieter is the only textile machine manufacturer to offer Rieter’s Services
four spinning technologies and to advise customers com- • Investment planning
petently, independently and with tailor-made solutions. • Plant planning
Investments in Rieter machines are exceptionally attrac-
• Project planning and realization
tive due to the outstanding price/performance ratio, the
• Installation and maintenance
low conversion costs and the longevity of the products,
which remain competitive by means of retrofits. Since • Preventive inspection
the company was established in Switzerland in 1795 Ri- • Wide range of wear-and-tear,
eter has developed high quality standards. All manufac- technology and spare parts
turing facilities are ISO 9001 certified.

Convincing Technology
Rieter possesses comprehensive textile and technology Rieter’s Services
expertise and covers the four spinning processes through • Spinning trials based on the four
to the textile end product. Alongside the most sophisti- spinning systems
cated machines and plants, Rieter offers extensive ser- • Spinning mill analysis to optimize
vices in the field of textile technology. Customers profit quality and productivity
from examinations and tests in Rieter’s spinning centres • Textile laboratory services
and laboratories and thus ensure the excellent quality of
• Professional textile technological
their yarns at high production capacity. publications

Supportive Partnership
Numerous sales and service centres support customers Rieter’s Services
throughout the world. For decades, customers have en- • Training for management and
joyed the advantages of one responsible contact partner perating personnel
for the entire spinning operation. • Com4® yarn marketing (yarn
licenses)
• Marketing support of reference
customers
• Rieter Award to confer a distinction
on the best students in the textile
industry
• Support for universities
• Symposia and roadshows close to
customers

23
Rieter Machine Works Ltd. Rieter India Private Ltd. Rieter (China)
Klosterstrasse 20 Gat No. 768/2, Village Wing Textile Instruments Co., Ltd.
CH-8406 Winterthur Shindewadi-Bhor Road Shanghai Branch
T +41 52 208 7171 Taluka Khandala, District Satara Unit B-1, 6F, Building A,
F +41 52 208 8320 IN-Maharashtra 412 801 Synnex International Park
machines@rieter.com T +91 2169 304 141 1068 West Tianshan Road
aftersales@rieter.com F +91 2169 304 226 CN-Shanghai 200335
T +86 21 6037 3333
F +86 21 6037 3399
www.rieter.com

The data and illustrations in this brochure and


on the corresponding data carrier refer to the
date of printing. Rieter reserves the right to
make any necessary changes at any time and
without special notice. Rieter systems and
Rieter innovations are protected by patents.

2611-v6 en 1801

S-ar putea să vă placă și