Documente Academic
Documente Profesional
Documente Cultură
1|Page
BUTING SENIOR HIGH SCHOOL
COC 1
1. You want to set up a dual-boot scenario between Windows 7 and Windows Server
2008. How would you do this?
2. What do you call the computer software which you configure before installing the
OS?
- It’s the BIOS Setup, wherein you’ll configure the setup to prioritize which will
be the priority to use, its either the CD/DVD/ROM or the other things to setup.
3. What would you advise to a client who wants to improve the computer’s built-in
video card?
- To buy an internal video card that has a higher memory or storage capacity.
4. What type of screw driver will you use for small screws usually found in Compaq
and Apple computers?
- A Torx Screwdriver
5. How will you check and what instrument will you use to determine whether the
power supply is providing enough voltage output or not?
- A Voltmeter that measures the output voltage of the power supply using
appropriate setting on the voltmeter.
6. What will you do if a customer wants to Install an operating system in his PC but
does not have an optical drive?
- Its either they provide the CD, Flash drive, or other components. Then, we will
help them to install an operating system by providing and install first the
programs that are necessary to install an operating system to make/create a
bootable disk or drive.
2|Page
BUTING SENIOR HIGH SCHOOL
7. What may be the problem if a computer does not recognize a bootable flash drive?
What would you do to resolve this?
- It maybe the BIOS is not properly configured to boot on the flash drive. And,
configure the BIOS to boot on the flash drive.
8. What will you do if after installing both the IDE hard drive and optical drive you
have noticed that only one drive is working?
9. If after assembling a brand new computer the monitor does not display any image
or character, what may be the possible causes?
10. What you should do after installing peripheral devices such as sound card?
11. What should you configure in the BIOS when you are going to install an operating
system using optical media?
12. What should you do if suddenly there is a lightning storm that occurs while
assembling a computer?
- If the computer is not attached to the grounded structure of the house, via a
power cable, than lighting should not be an issue. If you maintain contact with
the frame of the computer case, you will not have a potential difference in static
charge, again not an issue.
- If the lightning, or more likely the wind, downs a power line, you will loose
electricity, making it difficult to see the assembly job. Thats will be your biggest
issue.
3|Page
BUTING SENIOR HIGH SCHOOL
13. What should you do if accidentally, water spilled on the computer which you are
currently using?
- Turn it off, dry it off as best you can, and wait for it to be completely dry before
you turn it back on.
- Computers are surprisingly resilient to water spills, but better to be safe and
not have it powered. Shorting is the most common source of damage.
References:
https://www.scribd.com/document/340110291/Css-Nc-II-Reviewer-Possible-
Questions-and-Answers
https://www.scribd.com/document/306804225/CSS-NCII-Oral-Questioning-
Reviewer
https://www.quora.com/What-should-you-do-if-there-is-suddenly-a-lightning-
storm-that-occurs-while-you-are-assembling-a-computer
https://www.quora.com/search?q=What+should+you+do+if+accidentally%2C+w
ater+spilled+on+the+computer+which+you+are+currently+using%3F
4|Page