Documente Academic
Documente Profesional
Documente Cultură
0603
0805
1206
2010
2512
Features
Thin film technology
Full Wraparound
Nickel Barrier for
excellent solderability
Resistance values from
.022 ohm to 3 Megohm Nickel Barrier layer terminals
Standard Tolerances with a 100% Matte Tin finish
to ±0.1%
±0.01% and ±0.05%
available as special order Standard
25 ppm/°C Standard TCR PN 0.01%† 0.05%† 0.1% 0.5%
TPI-0402 49.9Ω to 12KΩ 49.9Ω to 12KΩ 1Ω to 205KΩ 1Ω to 205KΩ
10ppm/°C and 5ppm/°C TPI-0603 24.9Ω to 100KΩ 4.7Ω to 100KΩ 4.7Ω to 1MΩ 2Ω to 1MΩ
available as special order TPI-0805 24.9Ω to 200KΩ 4.7Ω to 500KΩ 4.7Ω to 2MΩ 1Ω to 2MΩ
TPI-1206 24.9Ω to 500KΩ 24.9Ω to 500KΩ 1Ω to 2.5MΩ 1Ω to 2.5MΩ
TPI-2010 24.9Ω to 500KΩ 24.9Ω to 500KΩ 4.7Ω to 3MΩ 1Ω to 3MΩ
TPI-2512 24.9Ω to 500KΩ 24.9Ω to 500KΩ 4.7Ω to 3MΩ 1Ω to 3MΩ
Low Ohms**
PN 1%
TPI-0805 0.2Ω to 8.2Ω
Characteristics TCR
Operating temperature -55°C to +125°C
Short time overload ± 0.5% + 0.05Ω Max. TPI-0402
Terminal strength ± 0.5% + 0.05Ω Max. 25 ppm/°C 10Ω to 205KΩ
Solder heat resistance ± 0.5% + 0.05Ω Max. 10 ppm/°C 49.9Ω to 12KΩ*
Solderability 95% minimum coverage 5 ppm/°C 49.9Ω to 3KΩ*
Temperature cycle ± 0.5% + 0.05Ω Max.
Load life ± 0.5% + 0.05Ω Max. TPI-0603
25 ppm/°C 2Ω to 1MΩ
Current noise -38dB to -30dB typical
10 ppm/°C 4.7Ω to 332KΩ*
5 ppm/°C 24.9Ω to 15KΩ*
Specifications TPI-0805
25 ppm/°C 1Ω to 2MΩ
10 ppm/°C 4.7Ω to 500KΩ*
Maximum Working Voltage
5 ppm/°C 24.9Ω to 30KΩ*
0402 25 VDC
0603 50 VDC
TPI-1206
0805 (low ohms) √P*R 25 ppm/°C 1Ω to 2.5MΩ
0805 (standard) 100 VDC 10 ppm/°C 4.7Ω to 1MΩ*
1206, 2010, 2512 150 VDC 5 ppm/°C 24.9Ω to 50KΩ*
Rated Power (70°C)
0402, 0603 63mW TPI-2010
0805 (low ohms) 250mW 25 ppm/°C 1Ω to 3MΩ
0805 (standard) 100mW 10 ppm/°C 4.7Ω to 1MΩ*
1206 125mW 5 ppm/°C 24.9Ω to 100KΩ*
2010 250mW
2512 500mW TPI-2512
25 ppm/°C 1Ω to 3MΩ
10 ppm/°C 4.7Ω to 1MΩ*
5 ppm/°C 24.9Ω to 100KΩ*
Ordering Information
Example: 97.6Ω, 0.5% 1206 resistor
TPI -1206 - 97R6 D
Thin-film Tolerance:
Wraparound
Wraparound T = 0.01%† D = 0.5%
Nickel barrier A = 0.05%† F = 1%
100% Matte Tin B = 0.1%
Form factor
0402* 1206* Resistance value:
0603* 2010* The first three digits are significant
0805* 2512* values. The fourth is the number of
zeros following. The ‘R’ indicates a 50 Schoolhouse Lane
*Add “V” for 5PPM† decimal point for values less than 10Ω Portsmouth, RI 02871
Tel (401) 683-9700
*Add “N” for 10PPM† Fax (401) 683-5571
e-mail: ims@ims-resistors.com
† Available as Special Order Only http://www.ims-resistors.com
TPI ver.9 1/13 Specifications subject to change without notice.