Documente Academic
Documente Profesional
Documente Cultură
Table of Contents
Description ............................................ 1
Assumptions .......................................... 2
Model Information ................................... 2
Study Properties ..................................... 4
Units ................................................... 4
Material Properties .................................. 5
Description Loads and Fixtures................................... 5
No Data Connector Definitions ............................... 6
Contact Information ................................. 6
Mesh information .................................... 7
Sensor Details ........................................ 8
Resultant Forces ..................................... 8
Beams .................................................. 8
Study Results ......................................... 9
Conclusion .......................................... 12
Model Information
Gusset1
E:\DICKY KURNIAWAN\File
Mass:2.6062 kg
Desain\SOLIDOWORKS\201
Volume:0.000332 m^3
9\01 JAN 19\07
Solid Body Density:7850 kg/m^3
Jan\STAND JAK\STAND
Weight:25.5408 N
JACK 950\950.SLDPRT
Feb 13 13:58:12 2019
CirPattern1[1]
E:\DICKY KURNIAWAN\File
Mass:2.6062 kg
Desain\SOLIDOWORKS\201
Volume:0.000332 m^3
9\01 JAN 19\07
Solid Body Density:7850 kg/m^3
Jan\STAND JAK\STAND
Weight:25.5408 N
JACK 950\950.SLDPRT
Feb 13 13:58:12 2019
CirPattern1[2]
E:\DICKY KURNIAWAN\File
Mass:2.6062 kg
Desain\SOLIDOWORKS\201
Volume:0.000332 m^3
9\01 JAN 19\07
Solid Body Density:7850 kg/m^3
Jan\STAND JAK\STAND
Weight:25.5408 N
JACK 950\950.SLDPRT
Feb 13 13:58:12 2019
Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
Fixed-1
Resultant Forces
Components X Y Z Resultant
Reaction force(N) 6.05122 588339 1.05774 588339
Reaction Moment(N.m) 0 0 0 0
Contact Information
Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 6.05122 588339 1.05774 588339
Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0
Beams
No Data
950-Static 1-Stress-Stress1
950-Static 1-Strain-Strain1
950-Static 1-Displacement-Displacement1{1}
Conclusion
Safety Description
Factor
For use with highly reliable materials where loading and environmental conditions are not severe, and
1.3–1.5
where weight is an important consideration.
For applications using reliable materials where loading and environmental conditions are not
1.5–2 severe.
For use with ordinary materials where loading and environmental conditions are not severe.
2–2.5
For less tried and for brittle materials where loading and environmental conditions are not severe.
2.5–3
For applications in which material properties are not reliable and where loading and environ mental
3–4 conditions are not severe, or where reliable materials are to be used under difficult loading and
environmental conditions.
Note : Our recommendation is to using these design to meet Application loads with range 55 - 60 tons using
safety factor of 2 - 2.5.