Sunteți pe pagina 1din 15

4.2.

3 Faculty Development Work (10)

Faculty Research Publications

1. Pikle, N. K., Sathe, S. R., & Vyavahare, A. Y. (2018). High performance iterative elemental
product strategy in assembly-free FEM on GPU with improved occupancy. Computing, 100(12),
1273-1297.

2. Pikle, N. K., Sathe, S. R., & Vyavahare, A. Y. (2019). Accelerating the finite element analysis of
functionally graded materials using fixed‐grid strategy on CUDA‐enabled GPUs. Concurrency and
Computation: Practice and Experience, e5207.

3. Patnana, V., Vyavahare, A. Y., & Gupta, L. M. (2019). Moment–Rotation Response for Semi-rigid
Connections. Recent Advances in Structural Engineering, Volume 1 (pp. 313-326). Springer,
Singapore.

4. Kumar, S. S., & Vyavahare, A. Y. (2016). Measurement of internal force in frame member.
International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) (pp.
2445-2450). IEEE.

5. Sachin, P., & Vyavahare, A. Y. (2015). Effect of Gap on Strength of Fillet Weld Loaded in Out-of-
Plane Bending. Advances in Structural Engineering (pp. 2409-2416). Springer, New Delhi.

6. Patnana, V., & Vyavahare, A. Y. (2016). Moment rotation curves for semi rigid connections.
International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) (pp.
2563-2568). IEEE.

7. Bhanupratap, R., Goel, M.D., Chakraborty, T., Matsagar, V.A., Guegan, P., & Binetruy, C. (2019).
Experimental and Numerical Investigation of High Strain Rate Behavior of CFRP Laminates, SN
Applied Sciences.

8. Palla, S., & Goel, M. D. (2019). Dynamic Response of Sacrificial Curved Steel Wall under Blast
Loading, Lecture Notes in Mechanical Engineering Book - "Advances in Structural Integrity -
Proceedings of ICONS-2018”.

9. Chordiya, Y., & Goel, M. D. (2019). Drop Weight Impact Behavior of Tube Filled Polymeric
Syntactic Foam, International Journal of Structural Glass and Advanced Materials Research,
DOI: 10.3844/sgamrsp.2019.

10. Chordiya, Y., & Goel, M. D. (2019) Low Velocity Impact Behavior of Aluminum Cenosphere
Syntactic Foam, Material Today Proceedings: Elsevier.
11. Chordiya, Y., & Goel, M. D., (2019) Low Velocity Impact Behavior of Closed Cell Aluminum
Considering Effect of Foam Skin, Lecture notes in Mechanical Engineering: Springer.

12. Chordiya, Y., & Goel, M. D. (2019) Numerical Stimulation of Low Impact Velocity Behavior of
Polymeric Syntactic Foam, Advanced Science Letters.

13. Chordiya, Y., & Goel, M.D., (2019) Numerical Simulation of Low Impact Velocity Behavior of
Closed Aluminum Considering Effect of Skin, EURASIA Journal of Mathematics, Science and
Technology Education.

14. Sahu, S., Mondal, D.P., Cho J.U., Goel, M.D., & Ansari, M.Z. (2019). Low Velocity Impact
Characteristics of Closed Cell AA2014-SiCp Composite Foam, Composite B,
https://doi.org/10.1016/j.compositesb.2018.12.054

15. Goel, M.D., Kumar, M., & Matsagar, V.A (2018), Blast Mitigation Analysis of Semi-Buried
Structure, Civil Engineering Infrastructure Journal, 51(2), 445-460.

16. Sahu, S., Mondal, D.P., Goel, M. D., & Ansari, M. Z., (2018). Finite element analysis of AA1100
elasto-plastic behaviour using Johnson-Cook model, Materials Today: Proceedings, 5 (2), Part 1,
5349–5353.

17. Mondal, D. P., Goel, M.D., Upadhyay, V., Das, S., Singh, M., & Barnwal, A. K. (2018). Alumina
Microballoons Reinforced Aluminum Syntactic Foam in Comparison with Cenosphere Reinforced
Aluminum Syntactic Foam Made Through Liquid Metallurgy Technique, Transactions of Indian
Institute of Metals, 71(3):56, 7–577.

18. Maddigpu, P. R., Sawant, B., Wanjari, S., Goel, M. D., Vione, D., Dhodapkar, R. S., & Rayalu, S.
(2018). Carbon nanoparticles for solar disinfection of Water, Journal of Hazardous Materials, 343,
157-165.

19. Goel, M.D., Agrawal, D., & Choubey, A. (2017). Collapse Behavior of RCC Building under Blast
Load. Procedia Engineering, 173, 1943-1950.

20. Goel, M.D., & Rawat, U. (2017). Design and Analysis of Wing Structures of Micro Air Vehicles,
Procedia Engineering, 173, 1602-1610.

21. Goel, M.D., Pawar, P. (2017). Numerical Simulation of Anti-Ram Bollard under Vehicle Impact,
Procedia Engineering, 173, 1595-1601.

22. Goel, M.D., Pandharkar, A., & Hora, M. S. (2017). Numerical Simulation of Crushing and Energy
Absorption Behavior of Twisted Tubes under Impact Loading, Procedia Engineering, 173, 1365-
1373.

23. Pandarkar, A. Goel, M.D., & Hora M.S. (2016). Axial Crushing of Hollow and Foam Filled Tubes:
An Overview, Sadhana, doi: 10.1007/s12046-016-0525-4., 1-13.
24. Morchhale, R.K. Goel, M.D., Patel, P., & Murali, S (2016). An Experimental Investigation on the
Development of Saw Dust Polymer Composite for Door Shutter Application as a Substitute to
Natural Wood, Asian Journal of Civil Engineering (BHRC), 17(3), 335-346.

25. Goel, M.D. (2016). Aluminum Foam for Protective Packaging in Comparison with Polymeric
Foams, Journal of Structural Engineering (JoSE), 43(3), 11-17.

26. Choubey, A., Goel, M. D. (2016). Progressive Collapse Analysis of RCC Structures, International
Journal of Optimization in Civil Engineering, 6(2), 287-301.

27. Goel, M. D. (2016), Numerical investigation of the axial impact loading behaviour of single,
double and stiffened circular tubes, International Journal of Crashworthiness, 21(1), 41-50.

28. Jain, S. S., Ansari, A., & Mahajan, M. M. (2018). Effect of Material Proportions on the Strength of
Pervious Concrete. Journal of Civil Engineering and Environmental Technology, Volume 5, Issue
7, pp. 518-522.

29. Balaji, G., &Mahajan, M. M. (2018). Study of Machine Foundation with Base Isolation.
Proceedings of 2ndInternational Conference on Frontiers in Engineering, Applied Sciences and
Technology (FEAST), National Institute of Technology, Tiruchirappalli.

30. Patel, M., &Mahajan, M. M. (2018). Influence of Mass Irregularity on Multi-storey Building.
International Conference on Frontiers in Engineering, Applied Sciences and Technology (FEAST).

31. Parmar, S. A., &Mahajan, M. M. (2018). Comparative Study of Various Design Codes for High
Rise Building under Seismic Loads. International Conference on Innovative Realms in Civil
Engineering (IRICE).

32. Ansari, A., &Mahajan, M. M. (2017). Effect of Fine aggregate on Performance of Pervious
Concrete. International Conference on Emerging Technology in Structural Engineering (ETSE),
IJERMCE, Vol 2, Issue 3, ISSN 2456-1290.

33. Ahmed, S., Ansari, A., &Mahajan, M. M. (2017). Validation of Experimental results using
Software based on DEM. International Conference on Architecture Civil and Environmental
Engineering (ACEE). (pp. 282-288)

34. Kumar, A., & Mahajan, M. M. (2017). To Study Alternative for Segmental Box Girder
Superstructure. International Conference on Architecture Civil and Environmental Engineering
(ACEE).
35. Mohan, M. R., & Mahajan, M. M. (2017). The Seismic Study of Frame Foundation for Rotary
Machine. International Conference on Architecture Civil and Environmental Engineering (ACEE),
11th June, Jawaharlal Nehru University, New Delhi. Vol. 4, Issue 3, pp. 282-288.

36. Chourasia, A., &Mahajan, M. M. (2016). Dynamic Response of Machine Foundation Supported on
pile. International Conference on Architecture Civil and Environmental Engineering (ACEE). 28th
May, Jawaharlal Nehru University, New Delhi. Vol. 3, Issue 4, pp. 303-308.

37. Pawar, R., & Mahajan, M. M. (2016). Performance based evaluation of bridge superstructure with
special reference to construction resources. International Conference on Architecture Civil and
Environmental Engineering (ACEE) (pp. 529-534).

38. Madhavi, G., & Mahajan, M. M. (2016). Critical study of Counterfort Retaining wall.
International Conference on Architecture Civil and Environmental Engineering (ACEE) (pp. 479-
485)

39. Harkal, P., & Mahajan, M. M. (2015). Critical study of RCC balancing tank. International
Conference on Advances in Science, Engineering and Technology.

40. Nagrale, P., & Mahajan, M. M. (2015). Critical study of Midrise shear wall-frame structure.
International Conference on Innovative Research in Mechanical, Electrical, Electronics, Civil,
Computer Science and Information Technology (MECIT) (pp 54-57).

41. Babu, D. S., & Mahajan, M. M. (2015). Study of Frame Foundation for Rotary Type Machine with
Base Isolator. International Conference on Innovative Research in Mechanical, Electrical,
Electronics, Civil, Computer Science and Information Technology (MECIT) (pp. 74-77).

42. Dahasahasra, S., & Mahajan, M. M. (2017). Challenges in transforming intermittent water supply
to 24x7 continuous supply – A case study of the Aurangabad city. Awwaindia Conference and
Exhibition (AICE).

43. Thakur, V. M. & Jaiswal, O R. (2019). An alternative formulation for optimum TMD parameters
based on equal Eigen value criteria, Journal of Earthquake Engineering,
https://doi.org/10.1080/13632469.2018.1559263

44. Lakhade S. O., Kumar, R., & Jaiswal, O. R., (2018), Damage states of yielding and collapse for
elevated water tanks supported on RC frame staging, Journal of Structural Engineering and
Mechanics, Vol. 67, No. 6, 587-601.
45. Jaiswal, O. R., Thakur, V. M. & Ghushe A. P. (2018), Tuned Mass Dampers to control oscillations
of Wind-Sensitive Flexible Structures. The Bridge and Structural Engineer, 47(4):17-27.

46. Mate, N. U., Bakre S. V., & Jaiswal, O. R. (2017), Seismic pounding response of Single-degree-
of-freedom elastic and inelastic structures using passive tuned mass damper, International Journal
of Civil Engineering, Springer, DoI 10.1007/s40999-017-0178-7. April 2017.

47. Kondekar, V. G., Jaiswal, O. R., Gupta, L. M., & Gandhi, P R. (2017). Characteristics of Gadhi
Soil, Proceedings of the Institution of Civil Engineers - Construction Materials, Vol. 170 (1), pp
29-39

48. Kondekar, V. G., Jaiswal, O. R., & Gupta, L. M. (2015), Optimization of Gadhi Soil Mix for
Adobe Brick, Electronic Journal of Geotechnical Engineering, Stillwater, USA, Vol. 20 [2015],
Bund. 9 (Indexed by SCOPUS) ISSN 1089-3032, pp 3965-3972

49. Mate, N. U., Bakre, S. V., & Jaiswal, O. R. (2015). Seismic pounding of adjacent linear elastic
buildings with various contact mechanism for impact simulation. Asian Journal of Civil
Engineering (BHRC), Iran, Vol 16, No. 3, 383-415.

50. Syed, A., Sonparote, R. S. (2016). Development of a Self-Supported Portable Pre-Tensioning


System for Slab Panels. Advances in Construction Technology and Management (January 21-23,
2016), VNIT, Nagpur.

51. Syed, A. & Sonparote, R. S., (2016). Analysis of Prestressed Precast Concrete Pavement. Journal
of Experimental and Applied Mechanics, 7 (1), 60-72.

52. Syed, A. & Sonparote, R. S., (2016). Analysis of Prestressed Precast Concrete Pavement.
International Conference on Recent Trends in Engineering and Material Sciences, 17-19 March
2016, Jaipur National University, Jaipur.

53. Nikose, T. & Sonparote, R. S., (2016). Codal Comparison of IS 875 (Part 3): 1987 and IS 875
(Part3): 2015 for Dynamic Wind Response of Tall Buildings. International Conference on Recent
Trends in Engineering and Material Sciences, 17-19 March 2016, Jaipur National University,
Jaipur.

54. Gharad, A. M. & Sonparote, R. S. (2017), Assessment of Resonance Effects on Railway Bridges
Under Moving Loads. I-manager’s Journal on Structural Engineering, 5(4), p37-47.

55. Syed, A., & Sonparote, R. S. (2017). Analysis of Prestressed Precast Concrete Pavement.
Materials Today: Proceedings. Volume 4, Issue 9, Pages 9713-9717, ISSN 2214-7853.

56. Syed, A. & Sonparote, R. S., (2019). Development and Early Age Performance of Prestressed
Precast Concrete Pavement. Journal of Construction Engineering and Management (ASCE)

57. Gharad, A. M. & Sonparote, R. S. (2019). Dynamic soil-structure interaction effects on3D integral
railway bridge under high-speed moving loads. Current Science 116 972-81

58. Nikose, T. & Sonparote, R. S., (2018). Dynamic along wind response of tall buildings using
Artificial Neural Network. Cluster Computing.
59. Nikose, T. & Sonparote, R. S., (2018). Computing dynamic across wind response of tall buildings
using artificial neural network. The Journal of Supercomputing.

60. Mahajan, S., & Sonparote, R. S. (2018). Implementation of Comparative Visualization Pedagogy
for Structural Dynamics. Computer Applications in Engineering Education 26 (5).

61. Mahajan, S., & Sonparote, R. S. (2018). An Educational Tool to improve understanding of
Structural Dynamics through Idealization of Physical Structure to Analytical Model. Computer
Applications in Engineering Education 26 (5).

62. Gharad, A. M. & Sonparote, R. S. (2018). Study of direct finite element method of analyzing soil-
structure interaction in a simply supported railway bridge subjected to resonance. Iranian Journal
of Science and Technology.

63. Gupta, L. M., Ronghe, G. N., & Dole, R. (2000). Optimum Design of Reinforced Concrete Beams
Using Polynomial Optimization Technique, Journal of Advances in Structural Engineering Multi
Science Publishing, Vol 3, No. 1, page 67 – 80.

64. Ronghe, G. N., & Gupta, L. M. (2002). Parametric Study of Tendon Profile in Prestressed Steel
Plate Girder, Journal of Advances in Structural Engineering Multi Science Publishing, Vol 5, No.
2, page 75 – 85.

65. Gupta Mohan, & Gupta, L. M., (2002). Discussion: AISC LRFD Rules for Block Shear in Bolted
Connection – A Review, Journal of American Institute of Steel Construction (AISC), Vol 39, No.
4, pp 240.

66. Gupta, L. M., Ronghe, G. N., & Naghate, M. K., (2003) ‘Behavior and Stability of Prestressed
Steel Plate Girder for Torsional Buckling’, Journal of Steel and Composite Structures, Vol 3, No.
1, page 65 – 73.

67. Gupta Mohan, & Gupta, L. M. (2004). Evaluation of Stress Distribution in Bolted Steel Angles
under Tension, Electronic Journal of Structural Engineering, Vol 4 page 17 – 27.

68. Deshpande, N. V., & Gupta, L. M. (2007). Experimental Study of Vrattayata Shape Silo Models,
Journal of Advanced Steel Construction, Vol 3, No. 2, pp 584 – 594.

69. Durga Prakash B., Gupta L. M., & Pachpor P. D. (2011). Strengthening of steel beam around
rectangular web openings, International Journal of engineering science and technology
ISSN:0975-5462, Vol 3, No. 2, pp 1130 – 1136.

70. Pachpor, P. D., Gupta, L. M., & Deshpande, N. V., Bedi Komal. (2011). Parametric study of
castellated beam, International Journal of Advanced Material Research ISSN:1662-8985, Vol –
Advances in Structures 163-167, pp 842-845.
71. Pachpor, P. D., Mittal, N. D., Gupta, L. M., & Deshpande, N. V. (2011). Finite element analysis
and comparison of castellated and cellular beam, International Journal of Advanced Material
Research ISSN:1662-8985, 2011, Vol –Advances in materials and processing technologies II 264-
265, pp 694-699.

72. Gupta, L. M., Ronghe, G. N., & Khatri, A. P. (2012). Discussion of ‘behavior of Prestressed Steel
Beams’ by B. Belletti and A. Gasperi, Journal of Structural Engineering, ASCE, pp 838.

73. Hedaoo, N. A., Gupta, L. M., & Ronghe, G. N. (2012). Design of composite slabs with profile
steel decking: A comparison between experimental and analytical study, Journal of Advanced
Structural Engineering, Vol 3, No. 1, pp 1-15.

74. Kondekar, V. G., Jaiswal, O. R., & Gupta, L. M. (2013). Geotechnical Properties of Stabilized
Ancient Gadhi Soil in Maharashtra State of India, Electronic Journal of Geotechnical Engineering,
Stillwater, Vol. 18, Bund.V, pp 5289-5302. (Indexed by SCOPUS) ISSN 1089-3032

75. Morkhade, S. G., & Gupta, L. M. (2013). Effect of load height on buckling resistance of steel
beams. Procedia Engineering, 51, 151-158.

76. Vyavahare, A. Y., & Gupta, L. M. (2014). Discussion of “Empirical Model of the Moment-
Rotation Curve of Beam-to-Beam Bolted Flush Endplate Connections” by MR Mohamadi-
Shooreh, M. Mofid, and SL McCabe. Journal of Structural Engineering, 140(7), 66-72.

77. Joshi, A. S., & Gupta, L. M. (2014). Vehicle Collision on Bridge piers- Static and Dynamic Elasto
Plastic Analysis - a Comparative Study. Journal of Structural Engineering, 41(3), 227-238.

78. Kondekar, V. G., Jaiswal, O. R., Gupta, L. M. (2015) Optimization of Gadhi Soil Mix for Adobe
Brick, Electronic Journal of Geotechnical Engineering, Vol. 20, Bund. 9, pp 3965-3972. ISSN
1089-3032

79. Morkhade, S. G., & Gupta, L. M. (2015). Analysis of steel I-beams with rectangular web openings:
experimental and finite element investigation. Engineering Structures and Technologies, 7(1), 13-
23.

80. Morkhade, S. G., & Gupta, L. M. (2015). An experimental and parametric study on steel beams
with web openings. International Journal of Advanced Structural Engineering (IJASE), 7(3), 249-
260.

81. Janyani, L., & Gupta, L. M. (2015). Vibration Analysis of Steel Metal Deck Floor. Journal of
Basic and Applied Engineering Research, 8, 685-688.

82. Morkhade, S. G., & Gupta, L. M. (2015). Experimental study and rotational capacity of steel
beams with web openings. International Journal of Civil and Structural Engineering, 6(1), 58.
83. Bhilawe, J. V., & Gupta, L. M. (2015). Experimental investigation of steel equal angle subjected to
compression. Engineering Structures and Technologies, 7(2), 55-66.

84. Hedaoo, N., Raut, N., & Gupta, L. M. (2015). Composite concrete slabs with profiled steel
decking: comparison between experimental and simulation study. American Journal or Civil
Engineering, 3(5), 157-169.

85. Kondekar, V. G., Jaiswal, O. R., Gupta, L. M., Gandhi, P. R. (2016) Characteristics of Gadhi Soil,
Themed Issue on Earthen Construction, Proceedings of the Institution of Civil Engineers:
Construction Materials, UK. (DOI: 10.1680/jcoma.15.00033)

86. Joshi, A.S., Hedaoo, N., & Gupta, L. M. (2015). Vessel Collisions on bridge piers: Simulation
study for dynamic amplification factors. Int. J. Civil Engg. Tech., 6(9), 205-217.

87. Gajrani, G., & Gupta, L. M. (2015). Behaviour and Analysis of Horizontally Curved Composite
Steel Girder Bridge System. Journal of Mechanical and Civil Engineering, 45-52.

88. Kondekar, V. G., Jaiswal, O. R., & Gupta, L. M. (2015). Optimization of Gadhi Soil Mix for
Adobe Brick, Electronic Journal of Geotechnical Engineering, Stillwater, Vol. 20, Bund. 9
(Indexed by SCOPUS) ISSN 1089-3032, pp 3965-3972

89. Kulkarni, A. S., & Gupta, L. M. (2017). Experimental investigation on flexural response of hybrid
steel plate girder. KSCE Journal of Civil Engineering, 1-17.

90. Morkhade, S. G., & Gupta, L. M. (2017). Experimental investigation for failure analysis of steel
beams with web openings. Steel and Composite Structures, 23(6), 647-656.

91. Morkhade, S. G., & Gupta, L. M. (2019). Ultimate load behaviour of steel beams with web
openings. Australian Journal of structural Engineering, 20(2), 124-133.

92. Kulkarni, A., & Gupta, L. M. (2019). Stable Length in Inelastic Design Considering Ductility
Requirement. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 01-
21.

93. Kulkarni, A., & Gupta, L. M. (2019). Evaluation of Rotation Capacity of I-shaped Welded Steel
Plate Girders. Arabian Journal for Science and Engineering, 44(5), 4533-4554.

94. Dhanuskar, J. R. & Gupta, L. M. (2019). Behaviour of Block Shear Failure in Different
Connections. Iranian Journal of Science and Technology, Transactions of Civil Engineering, DOI:
10.1007/s40996-019-00270-2.

95. Gupta, L. M., Ronghe, G. N., & Panpate, A. S. (1999). Parametric Study of Prestressed
unsymmetrical Steel Beams. Journal of Institution of Engineers. Vol 80, pp 94 – 100.
96. Parlewar, P. M., & Gupta, L. M. (1999). An Investigation of Composite Space Truss. Journal of
New Building Material and Construction, Vol 10, pp 90 – 92.

97. Gupta, L. M., & Deshpande, N. V. (2000). Steel Silo Containers – Optimization In Shape
(Technical Notes). Journal of Structural Engineering, Vol 27, No. 1, pp 55 – 59.

98. Gupta, L. M., & Parlewar, P. M. (2001). An Investigation of Concrete In-filled Steel Box
Columns, Journal of Structural Engineering, Vol 28, No. 1, pp 33 – 38.

99. Gupta, L. M., & Ronghe, G. N. (2002). Study of Prestressed / Unpressurised and Symmetrical /
Unsymmetrical Steel Plate Girder for Bridges. Journal of Steel in Construction of INSDAG
KOLKATA, Vol 3, No. 1, pp 49 – 58.

100. Gupta Mohan, & Gupta, L. M. (2002). Net Section Efficiency of Bolted Steel Angles
Under Tension. Journal of Steel in Construction of INSDAG KOLKATA, Vol 3, No. 2, pp 71 – 77.

101. Murthy, A. V., Hari Narayan, & Gupta, L. M. (2002). Analysis and Design of Prestressed
Simply Supported / Continuous Steel Beams. Journal of Structural Engineering, Vol 29, No. 2, pp
129 – 134.

102. Ronghe, G. N., & Gupta, L. M. (2002). Experimental Study of Prestressed Steel Bridge
Plate Girder with Different Tendon Profiles. Journal of Indian National Group of the International
Association for Bridge and Structural Engineering, Vol 32, No. 4, pp 1-21.

103. Gupta Mohan, & Gupta, L. M. (2003). Limit State Design of Bolted Steel Angle Under
Tension, Journal of Structural Engineering.

104. Harde P. R., & Gupta, L. M. (2004). Behavior of Double Layer Grid Structure Under Wind
and Thermal Effects. Journal of Steel in Construction of INSDAG KOLKATA, Vol 5, No. 2, pp 53–
63.

105. Deshpande, N. V., & Gupta, L. M. (2005). A New Shape for Steel Silo. Journal of Steel in
Construction of insdag kolkata, Vol. 6, No. 2, pp 55 – 60.

106. Hedaoo, N.A., Gupta, L. M., & Ronghe, G. N. (2007). Construction Methodology of
Composite Slab with Steel Decking, Concrete India. Journal of the India Chapter of ACI, Vol. 22,
No. 24, pp 15-19

107. Hedaoo, N.A., Gupta, L.M., & Ronghe, G.N. (2008). Preliminary Design of Cold-Formed
Thin-Walled Trapezoidal Profiled Steel Deck – A Parametric Study, Steel in Construction. Journal
of the INSDAG, Kolkata, Vol. 9, No. 2, pp 37-45.
108. Hedaoo, N.A., Gupta, L.M., & Ronghe, G.N. (2008). Time and Cost Evaluation of
Construction of Steel Framed Composite Floor and RCC Flat Slab Structures. Bulletin of ACCE
(I), pp 26-34.

109. Hedaoo, N.A., Gupta, L.M., & Ronghe, G.N. (2009). Linear Finite Element Analysis of
Profiled Steel Concrete Composite Deck, Steel in Construction. Journal of the INSDAG, Kolkata,
Vol. 10, No. 1, pp 23-28.

110. Joshi, A.S., & Gupta, L.M. (2010). Dynamic Amplification Factor for Rectangular and
Hollow Circular Bridge Pier subjected to Ship collision. Highway Research Journal of IRC, pp 93-
104.

111. Harde, P.R., & Gupta, L.M. (2010). Effect of support conditions on the behaviour of
double layer grids. IUP Journal of Structural Engineering, Vol-III, No-02, pp 22-33.

112. Harde, P.R., & Gupta, L.M. (2011). Nonlinear analysis of double layer grid structures.
Journal of Structural Engineering, Vol-38, No-3, pp 230-237

113. Joshi, A.S., & Gupta, L.M. (2012). Elastoplastic response of bridge piers due to vehicle
collision-A static approach. Journal of Structural Engineering, Vol-39, No-2, pp 193-209.

114. Kulkarni, A., & Gupta, L. M. Plastic performance of hybrid steel girders -Numerical
method. Journal of Structural Engineering, Structural Engineering Research Centre, Chennai

115. Mahajan, A., Kumar, R., & Kumbhar, O. G. (2019). Comparative Study of Flat Slab-
Column Connection Techniques for Seismic Loading. Recent Advances in Structural Engineering,
Volume 1 (pp. 171-182). Springer, Singapore.

116. Kumbhar, O. G., & Kumar, R. (2019). Effect of Modeling Assumptions on Seismic
Performance of RC Building. Recent Advances in Structural Engineering, Volume 1 (pp. 73-84).
Springer, Singapore.

117. Swetha, J., Kumbhar, O. G., & Kumar, R. (2019). Performance Estimation of Solid and
Punched Shear Wall Buildings with Two Modelling Techniques. In Recent Advances in Structural
Engineering, Volume 1 (pp. 61-72). Springer, Singapore

118. Lakhade, S. O., Kumar, R., & Jaiswal, O. R. (2017). Estimation of response reduction
factor of RC frame staging in elevated water tanks using nonlinear static procedure. Structural
Engineering and Mechanics, 62(2), 209-224.

119. Kumbhar, O. G., Kumar, R., & Adhikary, S. (2015). Effect of staircase on seismic
performance of RC frame building. Earthquakes and Structures, 9(2), 375-390.
120. Smita, C., & Kumar, R. (2015). Comparison of Seismic Vulnerability of Buildings
Designed for Higher Force Versus Higher Ductility. Advances in Structural Engineering (pp. 963-
975). Springer, New Delhi

121. Parate, K., & Kumar, R. (2019). Shear Strength Model for Reinforced Concrete Beam-
Column Joints Based on Hybrid Approach. Computers and Concrete, Accepted for publication.

122. Parate, K. and Kumar, R., (2019) “Shear strength criteria for design of RC beam–column
joints in building codes”, Bulletin of Earthquake Engineering, Vol. 17, No. 3 1407–1493
https://doi.org/10.1007/s10518-018-0492-8

123. Parate, K. and Kumar, R., (2019) “Simplified empirical model for shear strength of RC
beam–column joints”, Asian Journal of Civil Engineering, Vol. 20, No. 1 87–111
https://doi.org/10.1007/s42107-018-0090-8

124. Lakhade, S. O., Kumar, R., and Jaiswal, O. R., (2018). Damage states of yielding and
collapse for elevated water tanks supported on RC frame staging, Structural Engineering and
Mechanics, Vol. 67, No. (6)587-601.

125. Parate, K. and Kumar, R., (2016). Investigation of shear strength models for exterior RC
beam-column joint, Structural Engineering and Mechanics, Vol. 58, (3) 475-514.

126. Kumar, R., and Singh, Y., (2010), Stiffness of RC Frame Members for Seismic Analysis,
ACI Structural Journal, Vol. 107 (5) 607-615.

127. Joshi, G. C., and Kumar, R., (2010), Preliminary Seismic Vulnerability Assessment of
Mussoorie Town, Uttarakhand (India), Journal of Building Appraisal, Palgrave McMillan, Vol. 5
(4) 357-368.

128. Kumar, R., Singh, Y., and Tripathi, S., (2011), Effect of Building Performance on Floor
Response Spectra, Journal of Structural Engineering (JoSE), Vol. 37 (6) 421-425.

129. Singh, Y., Rameshkumar. A., and Kumar, R., (2010), Seismic Evaluation and Retrofit of a
Historical Masonry Building, Journal of the Institution of Engineers, Civil Engineering Division,
Vol. 91, 23-30

130. Patil, S. P., Singh, Y., Prasad, J. S. R., and Kumar, R., (2010), Seismic Performance and
Vulnerability Assessment of URM School Buildings in Uttarakhand, The IUP Journal of
Structural Engineering, Vol. 3 (2) 7-21.

131. Singh, Y., Chakraborty, S., and Kumar, R., (2009), Efficacy of Base Isolation for Seismic
Safety of URM Infills in RC Frame Buildings, The Icfai University Journal of Structural
Engineering, Vol. 2 (3), 38-47
132. Anand C. and Kumar R., (2019), Performance Assessment of RC Columns Subjected to
Non-Uniform Fire Exposure, National Conference on “Sustainable Infrastructure Development
and Management, Department of Civil Engineering, VNIT Nagpur, Paper no. SIDM-86, 22-23 Feb
2019

133. Kumbhar, O. G., and Kumar, R., (2018), Comparison of Seismic Demand Estimated by
FBD, DDBD and EBD Approach for RC Buildings, 16th Symposium on Earthquake Engineering,
IIT Roorkee, Paper no 199, Dec 2018.

134. Lakhade, S. O., Kumar, R., and Jaiswal, O. R., (2018), Comparison of Seismic
Performance of Frame Staging in Elevated Water Tank and Building Frame, 16th Symposium on
Earthquake Engineering, IIT Roorkee, Paper no 213, Dec 2018

135. Sivraj, S., Kumbhar, O. G., and Kumar, R., (2018). Comparison of various energy-based
approaches for seismic design of RC frame structures, in Proceedings of International Conference
on Advances in Construction Materials and Structures (ACMS- 2018), IIT Roorkee, Roorkee.

136. Krishna, G. V., and Kumar, R., (2018). Issues in design of tall concrete buildings in India
with references to IS 16700:2017 code, in Proceedings of International Conference on Advances
in Construction Materials and Structures (ACMS- 2018), IIT Roorkee, Roorkee

137. Gadilohar, S., and Kumar, R., (2018). Estimation of fire load in a building and procedure to
ascertain safety of structural elements, in Proceedings of International Conference on Advances in
Construction Materials and Structures (ACMS- 2018), IIT Roorkee, Roorkee

138. Kumbhar, O. G., Kriplani, S., and Kumar R., (2017) Assessment of Seismic Demand
Estimated by Various DDBD Approaches, Indian Conference on Applied Mechanics (INCAM)
2017, MNNIT Allahabad, India 5 7 July 2017, 381-386.

139. Hadole C., Kumar R., Kumbhar, O., (2017). Seismic Performance Assessment Of Fire
Affected Reinforced Concrete Building Using Non-Linear Static Procedure., in Proceedings of
International Conference on Emerging Technology in Structural Engineering, Nagpur, March –
2017, IJERMCE, Vol. 2(3), 187-191., Doi :
01.1617/vol4/iss3/pid71230.Link:https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ex
t_71230.pdf

140. Deoda, V., Kumar, R., & Kumbhar, O. G. (2017). Seismic Performance Assessment of Pre-
Stressed Precast RC Structure Using Non-Linear Static Procedure., in Proceedings of International
Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017,
IJERMCE, Vol. 2(3), 447-451, Doi: 01.1617/vol4/iss3/pid69540.
Link:https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_69540.pdf)\

141. Lakhade, S. O., Kumar, R., & Jaiswal, O. R.,(2017).,Effect of Modified Provisions of IS
1893 (Part 2):2014, on Design Base Shear of Elevated Water Tanks., Proceedings of International
Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017,
IJERMCE, Vol. 2(3), 429-433, Doi: 01.1617/vol4/iss3/pid79538.
Link:https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_79538.pdf

142. Marjive, S., Kumar, R., & Gupta, L. M., (2017). Influence of Shape of Intermediate Web
Stiffener in C-Lipped Cold-Formed Steel Channels on Buckling Strength., in Proceedings of
International Conference on Emerging Technology in Structural Engineering, Nagpur, March –
2017, IJERMCE, Vol. 2(3), 375-379, Doi: 01.1617/vol4/iss3/pid30612.
Link:https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_30612.pdf

143. Parate, K. & Kumar, R., (2017). Simplified Model for Shear Strength Prediction of RC
Exterior Beam-Column Joints., in Proceedings of International Conference on Emerging
Technology in Structural Engineering, Nagpur, March – 2017, IJERMCE, Vol. 2(3), 235-241, Doi:
01.1617/vol4/iss3/pid59180.
Link:https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_59180.pdf

144. Kriplani, S., Kumbhar, O. G., & Kumar R., (2017) Comparison of Various Direct
Displacement Based Approaches for Seismic Design., in Proceedings of International Conference
on Emerging Technology in Structural Engineering, Nagpur, March – 2017, IJERMCE, Vol. 2(3),
402-405, Doi: 01.1617/vol4/iss3/pid36179. (Link:
https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_36179.pdf

145. Ingole, S. J., & Kumar, R., (2017) Development of Scoring System for Seismic
Vulnerability Assessment of Indian Model Building Types., International Conference on
Emerging Technology in Structural Engineering, Nagpur, March – 2017, IJERMCE, Vol. 2(3),
383-387, Doi: 01.1617/vol4/iss3/pid36904.(Link:
https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_36904.pdf

146. Mahajan, A., Kumar, R. & Kumbhar O. G., (2016) Comparative study of flat slab-column
connection techniques for seismic loading, Structural Engineering Convention 2016, CSIR-SERC,
(2016) 166-171.

147. Kumbhar, O. G. & Kumar, R., (2016). Effect Engineering of modeling assumptions on
seismic performance of RC building, Structural Convention 2016, CSIR-SERC, (2016) 92-97.

148. Swetha, J., Kumbhar, O. G. & Kumar, R., (2016). Performance estimation of solid and
punched shear wall buildings with two modelling techniques, Structural Engineering Convention
2016, CSIR-SERC, (2016) 86-91.

149. Kumbhar, O., & Kumar, R., (2016). Impact of Local Stiffening Effect of Staircase on
Global Behavior of Structure, in Proceedings of International Conference on Advances in Civil
Infrastructure and Development of Smart Cities, Islampur, 2016.
150. Adhikary, S., Singh, Y., Lang, D.H., & Kumar, R. (2015), Effect of Soil on Seismic
Performance and Vulnerability of RC Frame Building, SECED 2015 Conference: Earthquake Risk
and Engineering towards a Resilient World, 9-10 July, Cambridge, UK.

151. Dubey, N., Sonparote, R. S. & Kumar, R. (2015), Effect of Construction Sequence
Analysis on Seismic Performance of Tall Buildings, International Conference on Innovative
Research in Mechanical, Electrical, Electronics, Civil, Computer Science and Information
Technology, J.N.U., New Delhi, 16-17 May 2015.

152. Parate, K. N., Kumar, R., & Bakre, S. V., (2014), A Review on Seismic Behavior of RC
Beam-Column Joints, 15th Symposium on Earthquake Engineering, IIT Roorkee, pp. 836―846,
Dec 2014

153. Nayak, S. S., Kumar, R., & Sonporate, R. S., (2014), Effect of Staged Construction
Analysis on Seismic Design and Performance of RC Buildings, 15th Symposium on Earthquake
Engineering, IIT Roorkee, pp. 439―449, Dec 2014

154. Samarth, D. D., Bakre, S. V., Kumar, R., (2014), Seismic Analysis of Adjacent Buildings
Connected with Dampers, ICCBE 2014: International Conference on Civil and Building
Engineering, Paris, France, June, 26-27.

155. Kumar, R., Singh, Y, & Deoliya, R., (2012), Effect of Design & Detailing Deficiencies on
Seismic Performance and Vulnerability of Indian RC Frame Buildings, Proc. 15 World
Conference on Earthquake Engineering. 24-28 Sept. 2012, Lisbon, Portugal Paper No. 4739.

156. S. Adhikary, Y. Singh, & R. Kumar (2010), Effect of Soil Amplification and Foundation
Flexibility on Seismic Performance of a Four Story RC Frame Building, Proc. 14th Symposium on
Earthquake Engineering, December 17-19, Indian Institute of Technology, Roorkee, pp. 1424-
1433.

157. Singh, Y., Kumar, R., & Putul Haldar (2009), Earthquake Resistant Design & Construction
Practices in India, Second India Disaster Management Congress – IDMC 2009, November 4-6,
Vigyan Bhaban, New Delhi, paper no. A1-SOA.

158. Dadi, V. V. S. S. K, Kumar, R. & Joshi, G. C., (2009), Seismic Survey and Condition
Assessment of Existing School Buildings in Uttarakhand, HDME 09, IIT Roorkee, Uttarakhand,
April 18, 2009, pp. 69―80.

159. Kumar, R., Singh Y, & Deoliya, R., (2009), Review of retrofitting techniques for masonry
infilled RC frame buildings, Trends and Challenges in Structural engineering and Construction
Technologies, Central Building Research Institute Roorkee (Uttarakhand), India February 11-12,
2009, pp. 284―296.
160. Singh, Y., & Kumar, R., (2008), Performance of Structures During Past Earthquakes:
Lessons for Construction Industry, International Conference on Construction – Managing
Earthquake Risk, January 30―31, India Habitat Centre, New Delhi, India. pp. 367-377.

161. Kumar, R., Singh, Y., & Paul, D.K. (2007), Design of Reinforced Concrete Jacketed
Columns, National Conference on Emerging Trends in Civil Engineering – 07, SSIT, Tumkur,
India. pp. 363―369.

162. Nikam A., Kumar, R & Singh, Y., (2006), Strength and Ductility of Steel Confined and
CFRP Confined RC Members”, 13 Symposium on Earthquake Engineering, DEQ-IITR, Roorkee,
India. pp. 1353―1363.

163. Kumar, R., Singh, Y., & Paul, D. K., (2004), Strength and Ductility of Jacketed RC
Members, Indo-Taiwan Joint Workshop on Seismic Evaluation and Retrofit of Buildings, Silver
Oak, habitat World at India Habitat Centre, New Delhi, Nov. 22-23, 2004. pp. 100―108.

164. Paul, D. K., Singh, Y, & Kumar R. (2004) Seismic Safety of Hospital Building – A Case
Study, Indo-Taiwan Joint Workshop on Seismic Evaluation and Retrofit of Buildings, Silver Oak,
habitat World at India Habitat Centre, New Delhi, Nov. 22-23, 2004.pp. 52―64.

165. Dubey, N., Sonparote, R. S. & Kumar R., (2014). Effect of Construction Sequence
Analysis on Seismic Performance of Tall Buildings. International Conference on Innovative
Research in Mechanical, Electrical, Electronics, Civil, Computer Science and Information
Technology.
166. Avinashe, G. A. & Sonparote, R. S., (2014). Use of Vb.Net For Design of Rcc Overhead
Water Tank. Proceedings of 27th IRF International Conference.
167. Dahake, S. M., Avinashe, G. A. & Sonparote R. S., (2014). Design of Footing subjected to
biaxial Moment by using Visual Basic Application. International Conference on Advances in Civil
and Mechanical Engineering Systems.
168. Bajpai, A. & Sonparote, R. S. (2017). Development of Software for Analysis and Design of
Pump House and Jack-Well. International Journal of Engineering Research in Mechanical and
Civil Engineering, Vol. 2, Issue 3, p441-444.
169. Bothra, S. & Sonparote, R. S. (2017). Optimized Modeling of Vehicle Induced Vibrations.
International Journal of Engineering Research in Mechanical and Civil Engineering, Vol. 2, Issue
3, p393-396.

S-ar putea să vă placă și