Documente Academic
Documente Profesional
Documente Cultură
description
The JFET-input operational amplifiers in the TL07_ series are designed as low-noise versions of the TL08_
series amplifiers with low input bias and offset currents and fast slew rate. The low harmonic distortion and low
noise make the TL07_ series ideally suited for high-fidelity and audio preamplifier applications. Each amplifier
features JFET inputs (for high input impedance) coupled with bipolar output stages integrated on a single
monolithic chip.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized
for operation from – 40°C to 85°C. The M-suffix devices are characterized for operation over the full military
temperature range of – 55°C to 125°C.
AVAILABLE OPTIONS
PACKAGE
VIOmax SMALL CHIP CERAMIC CERAMIC PLASTIC PLASTIC TSSOP FLAT
TA
AT 25°C OUTLINE CARRIER DIP DIP DIP DIP PACKAGE PACKAGE
(D)† (FK) (J) (JG) (N) (P) (PW) (W)
10 mV TL071CD TL071CP TL071CPWLE
6 mV TL071ACD — — — — TL071ACP — —
3 mV TL071BCD TL071BCP —
10 mV TL072CD TL072CP TL072CPWLE
0°C to
6 mV TL072ACD — — — — TL072ACP — —
70°C
3 mV TL072BCD TL072BCP —
10 mV TL074CD TL074CN TL074CPWLE
6 mV TL074ACD — — — TL074ACN — — —
3 mV TL074BCD TL074BCN —
TL071ID — TL071IP
– 40°C to
6 mV TL072ID — — — — TL072IP — —
85°C
TL074ID TL074IN —
6 mV TL071MFK — TL071MJG — — —
– 55°C to
6 mV — TL072MFK — TL072MJG — TL072MP — —
125
125°CC
9 mV TL074MFK TL074MJ — TL074MN — TL074MW
† The D package is available taped and reeled. Add the suffix R to the device type (e.g., TL071CDR). The PW package is only available left-ended
taped and reeled (e.g., TL072CPWLE).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Copyright 1996, Texas Instruments Incorporated
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
VCC +
1OUT
1OUT
4OUT
1IN –
4IN –
NC
NC
NC
NC
NC
NC
NC
NC
3 2 1 20 19 3 2 1 20 19
NC 4 18 NC 1IN+ 4 18 4IN+
3 2 1 20 19 1IN – 5 17 2OUT NC 5 17 NC
NC 4 18 NC NC 6 16 NC VCC+ 6 16 VCC –
IN – 5 17 VCC + 1IN + 7 15 2IN – NC 7 15 NC
NC 6 16 NC NC 8 14 NC 2IN+ 8 14 3IN+
IN + 7 15 OUT 9 10 11 12 13 9 10 11 12 13
NC 8 14 NC
VCC –
2IN–
3IN–
2IN+
NC
NC
NC
2OUT
NC
3OUT
9 10 11 12 13
VCC –
OFFSET N2
NC
NC
NC
NC – No internal connection
symbols
TL071
TL072 (each amplifier)
OFFSET N1 TL074 (each amplifier)
IN + + IN + +
OUT OUT
IN – – IN – –
OFFSET N2
VCC +
IN +
IN – 64 Ω
128 Ω
OUT
64 Ω
C1
18 pF
1080 Ω
ÎÎÎ
1080 Ω
ÁÁÁÁÁ ÁÁÁ
VCC –
ÁÁÁÁÁ
ÁÁÁÁÁ
OFFSET
NULL
(N1) ÁÁÁ
ÁÁÁ
OFFSET
NULL
(N2)
TL071 Only
All component values shown are nominal.
COMPONENT COUNT†
COMPONENT
TL071 TL072 TL074
TYPE
Resistors 11 22 44
Transistors 14 28 56
JFET 2 4 6
Diodes 1 2 4
Capacitors 1 2 4
epi-FET 1 2 4
† Includes bias and trim circuitry
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
Supply voltage, VCC – (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 18 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 30 V
Input voltage, VI (see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15 V
Duration of output short circuit (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: J, JG, or W package . . . . . . . . . . . . 300°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, P, or PW package . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC – .
2. Differential voltages are at IN+ with respect to IN –.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
4. The output may be shorted to ground or to either supply. Temperature and /or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX
25°C 3 10 3 6 2 3 3 6
VIO Input offset voltage VO = 0
0, RS = 50 Ω mV
Full range 13 7.5 5 8
Temperature
αVIO coefficient of input VO = 0, RS = 50 Ω Full range 18 18 18 18 µV/°C
offset voltage
25°C 5 100 5 100 5 100 5 100 pA
IIO Input offset current VO = 0
Full range 10 2 2 2 nA
25°C 65 200 65 200 65 200 65 200 pA
IIB Input bias current§ VO = 0
Full range 7 7 7 20 nA
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
–12
12 –12
12 –12
12 –12
12
Common-mode
Common mode
VICR 25°C ±11 to ±11 to ±11 to ±11 to V
input voltage range
15 15 15 15
10 kΩ
–
VO
1 kΩ –
VI + VI
VO
CL = 100 pF RL = 2 kΩ +
RL CL = 100 pF
– TL071
IN –
OUT
+ N2
IN +
N1
100 kΩ
1.5 kΩ
VCC –
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
IIB Input bias current vs Free-air temperature 4
vs Frequency 5, 6, 7
vs Free-air temperature 8
VOM Maximum output voltage
vs Load resistance 9
vs Supply voltage 10
vs Free-air temperature 11
AVD Large signal differential voltage amplification
Large-signal
vs Frequency 12
Phase shift vs Frequency 12
Normalized unity-gain bandwidth vs Free-air temperature 13
Normalized phase shift vs Free-air temperature 13
CMRR Common-mode rejection ratio vs Free-air temperature 14
vs Supplyy voltage
g 15
ICC Supply current
vs Free-air temperature 16
PD Total power dissipation vs Free-air temperature 17
Normalized slew rate vs Free-air temperature 18
Vn Equivalent input noise voltage vs Frequency 19
THD Total harmonic distortion vs Frequency 20
Large-signal pulse response vs Time 21
VO Output voltage vs Elapsed time 22
TYPICAL CHARACTERISTICS†
ÎÎÎÎÎ
IB Input Bias Current – nA
10
ÎÎÎÎÎ
± 10 VCC ± = ± 10 V
1 ± 7.5
±5 VCC ± = ± 5 V
0.1
IIIB–
ÁÁÁ
ÁÁÁ
± 2.5
0.01 VOM 0
– 75 – 50 – 25 0 25 50 75 100 125 100 1k 10 k 100 k 1M 10 M
TA – Free-Air Temperature – °C f – Frequency – Hz
Figure 4 Figure 5
ÎÎÎÎÎ ÎÎÎÎ
RL = 2 kΩ VCC ± = ± 15 V
VOM – Maximum Peak Output Voltage – V
ÎÎÎÎÎ ÎÎÎÎ
TA = 25°C RL = 2 kΩ
± 12.5 VCC ± = ± 15 V ± 12.5
TA = 25°C
See Figure 2 See Figure 2
± 10 ± 10
ÎÎÎÎ
ÎÎÎÎ
TA = – 55°C
VCC ± = ± 10 V
± 7.5 ± 7.5
TA = 125°C
±5 ±5
ÁÁ VCC ± = ± 5 V
ÁÁÁ
ÁÁ ± 2.5
ÁÁÁ ± 2.5
VOM
VOM
ÁÁ 0
100 1k 10 k 100 k 1M 10 M
ÁÁÁ 0
10 k 40 k 100 k 400 k 1 M 4M 10 M
f – Frequency – Hz f – Frequency – Hz
Figure 6 Figure 7
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TYPICAL CHARACTERISTICS†
ÎÎÎÎ
VOM – Maximum Peak Output Voltage – V
ÎÎÎÎ
See Figure 2
RL = 2 kΩ
± 10 ± 10
± 7.5 ± 7.5
±5 ±5
ÁÁ ± 2.5
ÁÁ ± 2.5
ÁÁ ÁÁ
VOM
VCC ± = ± 15 V VOM
See Figure 2
0 0
– 75 – 50 – 25 0 25 50 75 100 125 0.1 0.2 0.4 0.7 1 2 4 7 10
TA – Free-Air Temperature – °C RL – Load Resistance – kΩ
Figure 8 Figure 9
LARGE-SIGNAL
MAXIMUM PEAK OUTPUT VOLTAGE DIFFERENTIAL VOLTAGE AMPLIFICATION
vs vs
SUPPLY VOLTAGE FREE-AIR TEMPERATURE
± 15 1000
RL = 10 kΩ
VOM – Maximum Peak Output Voltage – V
TA = 25°C 400
± 12.5
VD – Large-Signal Differential
Voltage Amplification – V/mV
200
± 10 100
40
± 7.5
20
±5 10
ÁÁ
AVD
ÁÁ
4 VCC ± = ± 15 V
A
± 2.5
VOM
VO = ± 10 V
ÁÁ
2 RL = 2 kΩ
0 1
0 2 4 6 8 10 12 14 16 – 75 – 50 – 25 0 25 50 75 100 125
|VCC ±| – Supply Voltage – V TA – Free-Air Temperature – °C
Figure 10 Figure 11
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TYPICAL CHARACTERISTICS†
LARGE-SIGNAL
DIFFERENTIAL VOLTAGE AMPLIFICATION
AND PHASE SHIFT
vs
FREQUENCY
106
VCC± = ± 5 V to ± 15 V
RL = 2 kΩ
VD – Large-Signal Differential 105 TA = 25°C
Voltage Amplification
104 0°
Phase Shift
Differential
Voltage
Amplification
103 45°
102 90°
AVD
Phase Shift
A
101 135°
1 180°
1 10 100 1k 10 k 100 k 1M 10 M
f – Frequency – Hz
Figure 12
Unity-Gain Bandwidth
Normalized Unity-Gain Bandwidth
1.2 1.02
Normalized Phase Shift
1.1 1.01
Phase Shift
1 1
0.9 0.99
VCC ± = ± 15 V
0.8 0.98
RL = 2 kΩ
f = B1 for Phase Shift
0.7 0.97
– 75 – 50 – 25 0 25 50 75 100 125
TA – Free-Air Temperature – °C
Figure 13
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TYPICAL CHARACTERISTICS†
TA = 25°C
1.4
87
1.2
86 1
0.8
85
0.6
ÁÁ 0.4
ÁÁ
84
I CC 0.2
83 0
– 75 – 50 – 25 0 25 50 75 100 125 0 2 4 6 8 10 12 14 16
TA – Free-Air Temperature – °C |VCC ±| – Supply Voltage – V
Figure 14 Figure 15
No Load No Load
1.6 200
1.4 175
TL074
1.2 150
1 125
ÎÎÎ
ÎÎÎ
0.8 100
TL072
ÁÁÁ
0.6 75
ÁÁÁ
TL071
PD
0.4 50
ÁÁÁ
I CC
0.2 25
0 0
– 75 – 50 – 25 0 25 50 75 100 125 – 75 – 50 – 25 0 25 50 75 100 125
TA – Free-Air Temperature – °C TA – Free-Air Temperature – °C
Figure 16 Figure 17
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TYPICAL CHARACTERISTICS
ÁÁÁ
EQUIVALENT INPUT NOISE VOLTAGE
vs vs
ÁÁÁ
FREE-AIR TEMPERATURE FREQUENCY
ÁÁÁ
1.15 50
nV/ Hz
VCC ± = ± 15 V
ÁÁÁ
AVD = 10
RL = 2 kΩ RS = 20 Ω
1.10
Normalized Slew Rate – V/µ s
CL = 100 pF 40 TA = 25°C
1.05
30
20
0.95
10
0.90
Vn
V
0.85 0
– 75 – 50 – 25 0 25 50 75 100 125 10 40 100 400 1 k 4 k 10 k 40 k 100 k
TA – Free-Air Temperature – °C f – Frequency – Hz
Figure 18 Figure 19
AVD = 1 RL = 2 kΩ
THD – Total Harmonic Distortion – %
0.4
VI(RMS) = 6 V 4 CL = 100 pF
TA = 25°C TA = 25°C
Output
0.1 2
0.04
0
0.01
ÁÁ –2
ÎÎÎ
0.004 ÁÁ
ÁÁ –4
ÎÎÎ Input
0.001
100 400 1k 4 k 10 k 40 k 100 k
ÁÁ –6
0 0.5 1 1.5 2 2.5 3 3.5
f – Frequency – Hz t – Time – µs
Figure 20 Figure 21
TYPICAL CHARACTERISTICS
OUTPUT VOLTAGE
vs
ELAPSED TIME
28
24
Overshoot
O – Output Voltage – mV
20
90%
16
12
ÁÁÁ
8
ÁÁÁ
VO
4
V
10% VCC ± = ± 15 V
0 RL = 2 kΩ
tr
TA = 25°C
–4
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
t – Elapsed Time – µs
Figure 22
APPLICATION INFORMATION
RF = 100 kΩ
VCC +
–
15 V
3.3 kΩ Output R1 R2 TL071
– +
Input Output
TL071 C3
CF = 3.3 µF
+ VCC –
1 kΩ
– 15 V
R3
R1 + R2 + 2R3 + 1.5 MW
3.3 kΩ C1 C2 C1 + C2 + C3 + 110 pF
9.1 kΩ 2
f + 2p R
1
C
f +
O
1
2p R1 C1
+ 1 kHz
F F
Figure 23. 0.5-Hz Square-Wave Oscillator Figure 24. High-Q Notch Filter
VCC +
–
1 MΩ
TL074 Output A
VCC + +
– VCC –
1 µF TL074 VCC +
+
Input –
100 kΩ VCC –
VCC +
VCC +
100 µF 100 kΩ –
TL074 Output C
+
VCC –
APPLICATION INFORMATION
VCC +
–
88.4 kΩ VCC +
TL072 –
+
88.4 kΩ TL072 6 cos ωt
VCC – +
18 pF 1 kΩ
VCC –
15 V
1N4148 18 kΩ (see Note A)
88.4 kΩ
VCC +
0.1 µF
10 kΩ
10 kΩ 1 MΩ
IN – –
50 Ω TL071 OUT
+
IN + N2
N1
0.1 µF 10 kΩ
100 kΩ
Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor
product or service without notice, and advises its customers to obtain the latest version of relevant information
to verify, before placing orders, that the information being relied on is current.
TI warrants performance of its semiconductor products and related software to the specifications applicable at
the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are
utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each
device is not necessarily performed, except those mandated by government requirements.
Certain applications using semiconductor products may involve potential risks of death, personal injury, or
severe property or environmental damage (“Critical Applications”).
Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI
products in such applications requires the written approval of an appropriate TI officer. Questions concerning
potential risk applications should be directed to TI through a local SC sales office.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards should be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance, customer product design, software performance, or
infringement of patents or services described herein. Nor does TI warrant or represent that any license, either
express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property
right of TI covering or relating to any combination, machine, or process in which such semiconductor products
or services might be or are used.