Documente Academic
Documente Profesional
Documente Cultură
Home / Reference Guides / Concrete Design - BS 8110 / Column Design to BS 8110 / Cover to Reinforcement (Columns: BS 8110)
You are required to set a minimum value for the nominal cover, cnom, u, for each column in the column
properties.
These values are then checked against the nominal limiting cover, cnom,lim which depends on the diameter of
the reinforcement and maximum nominal aggregate size, hagg (specified in Design Options > Column >
General Parameters).
If cnom,u < cnom,lim then a warning is displayed in the calculations.
Parent topic
• Column Design to BS 8110
https://teklastructuraldesigner.support.tekla.com/webhelps/tsd/2017/All_Codes/Reference_Guides/BS_Concrete_Member_Design_Handbook/Column_Design/C… 1/1