Documente Academic
Documente Profesional
Documente Cultură
of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
Type of Protection: Flameproof enclosures ''d''; Increased safety ''e''; Protection by enclosure ''t''
Marking:
Ex d IIC Gb
Ex e IIC Gb
Ex tb III C Db
Signature:
(for printed version)
Date:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx
Scheme Rules, IECEx 02 and Operational Documents as amended.
STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was
found to comply with the following standards:
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the
Test Report:
HR/EXA/ExTR13.0001/00
IT/CES/QAR12.0006/00
IECEx Certificate
of Conformity
Certificate No: IECEx EXA 13.0001U Issue No: 0
Schedule
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
Equipment and systems covered by this certificate are as follows: - RE – REM – REB – REN Reducers / Adapters -
LBY Pulling elbows - NP – EM Nipples / Couplings - PLG Plugs - ELF – ELM
– ELMF Elbows - VEXE Drain valve This accessories are intended to be used for installation on enclosures in
types of protection: flameproof enclosure ''d''; increased safety ''e'' and protected by enclosure ''tb''.
Schedule of limitations:
2. Drain valve type: VEXE is intended to be used for installation on enclosures in types of protection increased safety ''e'' and protected
by enclosure ''tb''.
Additional information:
See Annex
Annex:
Issue No. 0
Ex-Agencija
Baštijanova bb
10001 Zagreb Date: 2013-08-23 Page: 1 of 1
Croatia
Product description:
The accessories type RE – REM – REB – REN – LBY – NP – EM – ELF – ELM – ELMF are normally used in rigid tube
electrical systems with the purposes of facilitating cable insertion in electrical enclosures without altering type of
protection.
The accessories type PLG are normally used to close holes threaded of entry cable in electrical enclosures without
altering type of protection.
The accessories type VEXE are normally used in electrical enclosures to permit drain and breather of the same one.
Full type designation consists of markings of type, size, type of thread, material and model type according to following
tables:
Type of
Size Type of thread Material Model type
component
LBY 16 – 26 – 36 – 56 N–M–G AL–X–AZ–OT–ON -
NP 1÷8 N–M–G AL–X–AZ–OT–ON A-B
EM 1÷8 N–M–G AL–X–AZ–OT–ON -
PLG 1÷8 N–M–G AL–X–AZ–OT–ON A–B–C-D
ELF–ELM–ELMF 1÷8 N–M–G AL–X–AZ–OT–ON -
VEXE 1 N–M X
Type of Type of
Type of component Size Size Material Model type
thread thread
RE – REM –
1÷9 N–M–G 1÷9 N–M–G AL–X–AZ– T–ON A –B
REB – REN
Abbreviations:
Type of threads: N – NPT; M – Metric; G - Gas
Materials: AL – Aluminium; X – Stainless steel; AZ – Carbon steel; OT – Brass; ON – Nickel plated brass
Type of threads: