Documente Academic
Documente Profesional
Documente Cultură
TEMPERATURE SENSORS
TYPES, HOW IT WORKS & APPLICATIONS
1 INTRODUCTION 5 HOW DOES TEMPERATURE
SENSOR WORK?
4 WHAT IS A TEMPERATURE
SENSOR USED FOR? 8 ADVANTAGES OF ENCARDIO
RITE’S TEMPERATURE SENSOR
1 INTRODUCTION
Temperature sensors are a simple instrument that measures the degree of hotness
or coolness and converts it into a readable unit.
A thermocouple (T/C) is made from two dissimilar metals that generate an electrical
voltage in direct proportion with the change in temperature.
The working of a temperature meter depends upon the voltage across the diode.
The cooler the temperature, lesser will be the resistance, and vice-versa.
The resistance across the diode is measured and converted into readable units of
temperature (Fahrenheit, Celsius, Centigrade, etc.) and, displayed in numeric form
over readout units.
In geotechnical monitoring field, these temperature sensors are used to measure the
internal temperature of structures like bridges, dams, buildings, power plants, etc.
4 WHAT IS A TEMPERATURE SENSOR USED FOR?
The most common area where temperature sensor is used is while curing the
concrete because it has to be relatively warm in order to set and cure properly. The
seasonal variations cause structural expansion or contraction thereby, changing its
overall volume.
5 HOW DOES TEMPERATURE SENSOR WORK?
The basic principle of working of the temperature sensors is the voltage across the
diode terminals.
If the voltage increases, the temperature also rises, followed by a voltage drop
between the transistor terminals of base and emitter in a diode.
Encardio-Rite has a vibrating wire temperature sensor that works on the principle of
stress change due to temperature change.
The vibrating wire temperature sensor primarily consists of a magnetic, high tensile
strength stretched wire, the two ends of which are fixed to any dissimilar metal in a
manner that any change in temperature directly affects the tension in the wire and,
thus, its natural frequency of vibration.
5 HOW DOES TEMPERATURE SENSOR WORK?
The frequency, which is proportional to the temperature and in turn to the tension ‘σ’
in the wire, can be determined as,
f = 1/2 [σg/ρ] / 2l Hz
Where:
σ = tension of the wire
g = acceleration due to gravity
ρ = density of the wire
l = length of wire
6 WHAT ARE THE DIFFERENT TYPES OF TEMPERATURE SENSORS?
There are a few temperature meters that measure the degree of hotness or coolness
in an object by being in direct contact with it. Such temperature sensors fall under
the category contact-type. They can be used to detect solids, liquids or gases over a
wide range of temperatures.
These types of temperature meters are not in direct contact of the object rather, they
measure the degree of hotness or coolness through the radiation emitted by the
heat source. the category contact-type. They can be used to detect solids, liquids or
gases over a wide range of temperatures.
6 WHAT ARE THE DIFFERENT TYPES OF TEMPERATURE SENSORS?
Thermostat
The difference in the coefficient of linear expansion of both the metals causes them
to produce a mechanical bending movement when it’s subjected to heat.
6 WHAT ARE THE DIFFERENT TYPES OF TEMPERATURE SENSORS?
Thermistors
Thermistors or thermally sensitive resistors are the ones that change their physical
appearance when subjected to change in the temperature.
The thermistors are made up of ceramic material such as oxides of nickel, manga-
nese or cobalt coated in glass which allows them to deform easily.
Most of the thermistors have a negative temperature coefficient (NTC) which means
their resistance decreases with an increase in the temperature.
But, there are a few thermistors that have a positive temperature coefficient (PTC)
and, their resistance increases with a rise in the temperature.
6 WHAT ARE THE DIFFERENT TYPES OF TEMPERATURE SENSORS?
RTDs are precise temperature sensors that are made up of high-purity conducting
metals such as platinum, copper or nickel wound into a coil. The electrical resis-
tance of an RTD changes similar to that of a thermistor.
6 WHAT ARE THE DIFFERENT TYPES OF TEMPERATURE SENSORS?
Thermocouples
One of these junctions, known as the Cold junction, is kept at a specific temperature
while the other one is the measuring junction, known as the Hot junction.
It provides a huge resistance at very low temperatures. This means, as soon as the
temperature starts increasing, the resistance starts dropping quickly.
They contain two similar diodes with temperature-sensitive voltage and current
characteristics to measure the temperature changes effectively.
They give linear output but are less accurate and exhibit the slowest responsiveness
(5 s to 60 s) across the narrowest temperature range (-70 °C to 150 °C).
6 WHAT ARE THE DIFFERENT TYPES OF TEMPERATURE SENSORS?
The Encardio-rite Model ETT-10V vibrating wire temperature meter is used for the
measurement of internal temperature in concrete structures or water. It has a
resolution of better than 0.1°C and works similar to that of Thermocouple Tempera-
ture Sensors. It also has a high temperature range from -20oto 80o C.
6 WHAT ARE THE DIFFERENT TYPES OF TEMPERATURE SENSORS?
Model ETT-10TH resistance temperature probe is specially designed for the mea-
surement of surface temperatures of steel & measurement of the surface tempera-
ture of concrete structures.
Encardio-rite’s model EDI-51V vibrating wire indicator when used with ETT-10TH
directly shows the probe temperature in degree Celsius.
6 WHAT ARE THE DIFFERENT TYPES OF TEMPERATURE SENSORS?
Encardio-Rite Thermocouple
https://www.encardio.com/geotechnical-instruments/inclinometers/
It consists of two dissimilar metals, joined together at one end. When the junction of
the two metals is heated or cooled a voltage is produced that can be correlated back
to the temperature.
7 WHERE IS THE TEMPERATURE SENSOR USED?
• The temperature sensors are used for verifying design assumptions that will
promote safer and economical design and construction.
• They are used to measure the temperature rise during the process of curing
concrete.
• They can measure rock temperatures near liquid gas storage tanks and ground
freezing operations.
• Temperature sensors can also measure water temperatures in reservoirs and
boreholes.
• It can be used to interpret temperature related stress and volume changes in dams.
• They can also be used to study the temperature effect on other installed
instruments.
8 ADVANTAGES OF ENCARDIO RITE’S TEMPERATURE SENSOR
• The Encardio-Rite temperature sensor is precise, low cost, and extremely reliable.
• They are suitable for both surface mount and embedded applications.
• The low thermal mass results in faster response time.
• The vibrating wire temperature sensor is fully interchangeable; one indicator can
read all sensors.
• It has a weather-proof body rated IP-68.
• They come with indicators that are readily available for direct temperature display.
• The temperature probes have excellent linearity and hysteresis.
• The vibrating wire technology assures long term stability, quick and easy readout.
THANK YOU
www.encardio.com